Tender For Provision Of Toilet And Bathroom Near Bldg No. Asc-05 At Dagshai Under Ge Kasauli
Tender Value
4.92 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
15 days left
EMD
9846
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Toilet And Bathroom Near Bldg No. Asc-05 At Dagshai Under Ge Kasauli
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, not exceeding 1.50 metre wide and not exceeding 1.50m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10 sq.m on plan and not exceeding 1.50m in depth and getting out in hard/dense soil complete, all as specified and as directed. |
| 2 | Excavating in trenches, not exceeding 1.50 metre wide and not exceeding 1.50m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10 sq.m on plan, exc. 1.5 m deep and not exc. 3.0 m and getting out in hard/dense soil complete all as specified and directed |
| 3 | Returning filling in, including spreading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each layer complete, all as specified and directed. |
| 4 | Removing excavated soil to a distance not exceeding 50 metre and deposited where directed at a level not exceeding 1.5m above the starting point, complete all as specified. |
| 5 | Material and labour for plain cement concrete 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate), as in foundation filling and mass concrete, complete all as specified and directed. |
| 6 | Material and Labour reinforcement cement concrete M-25 (design mix) with using 20mm graded stone aggregate as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 7 | Material and Labour for reinforcement cement concrete M-25 (design mix) with using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 8 | Material and Labour reinforcement cement concrete M-25 (design mix) with using 20mm graded stone aggregate as in Beams, cantilevers,bressummers, lintels over 1.5m span complete all as specified and directed. |
| 9 | Material and Labour reinforcement cement concrete M-25 (design mix) with using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, chajjas and in shelves and the like complete all as specified and directed |
| 10 | Material and Labour for pre-cast cement concrete type B-1 1:2:4 (using 20 mm graded mechanically crushed stone aggregate), as in cover slabs for manhole, shelves, septic tank, etc. set in cement mortar (1:6) and finished cement concrete surface even and fair without using extra cement, complete all as specified and directed. |
| 11 | Form work to side of concrete foundation ,footings base of columns raft and raft beams ,sides and soffit of foundation and plinth beams and similar work |
| 12 | Form work work to flat rough finish sides of Square, rectangular pillars, columns and stanchions of fair finished square, rectangular surface complete all as specified and directed. |
| 13 | Form work to flat rough finish sides and soffits of floor or roof beams, beam haunchings, lintels, cantilevers, shelves including supports, overhangs, etc. complete all as specified and directed. |
| 14 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, chajjas, shelves, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair and finished surfaces etc., complete all as specified and directed. |
| 15 | Material and Labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as specified and directed. |
| 16 | Material and labour for broken stone hard core of gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 17 | Material and Labour for cement concrete 1:4:8 type D-2 ( using 40mm graded stone aggregate) 75 mm thick as in sub base floor etc complete all as specified and directed. |
| 18 | Material and Labour for cement concrete 1:2:4 type B1 ( using 20 mm graded stone aggregate) 40 mm thick as in sub base floor all as specified and directed. |
| 19 | Material and Labour 75 mm thick Plain Cement Concrete (1:3:6) using 20 mm graded stone aggregate laid in panels in plinth protection etc including necessary form work and making top surface even & fair surfaces without using extra cement etc complete all as specified and directed. |
| 20 | Material and labour TMT bars, 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 21 | Material and labour TMT bars, 8 mm dia , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 22 | Material and Labour for Brick work with old size subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6. all as specified and as directed |
| 23 | Material and Labour for 25mm thick cement concrete type B-0. 1:2:4 (12.5mm graded aggregate) as in sub base/levelling course on roof surfaces complete all as specified and directed. |
| 24 | Material and Labour for 15mm thick rendering in CM 1:4 with water proofing compound @ 3% by weight of cement on brick masonary/concrete surfaces and finished even and smooth without using extra cement. |
| 25 | Material and Labour 10 mm thick rendering or bedding layer on concrete surfaces of roof in CM 1:3 with liquid water proofing compound @ 200 ml per bag of cement complete all as specified and directed. (WPC shall be measured and paid separately) |
| 26 | Material and Labour for 15 mm thick rendering on stone or surface other than fair face of brick-work in CM (1:4) surface finished even and smooth without using extra cement with @ 200 ml WPC (liquid type) per bag of cement complete all as specified and directed.Note:-WPC (liquid type) shall be measured and paid separately as supply only. |
| 27 | Supply only liquid water proofing compound of approved make all as specified and directed. |
| 28 | Material and Labour for 15 mm thick rendering on fair face of brick-work in cement mortar 1:6 etc finished even and smooth without using extra cement complete all as specified and as directed. |
| 29 | Material and Labour for 5 mm thick rendering on fair faces of concrete surfaces as in ceiling, in CM (1:3) and surface finished even smooth without using extra cement complete all as specified and directed. |
| 30 | Preperation of newly plastered surfaces of wall, Chalk whiting on plastered surfaces and applying two coat of oil bound distemper over 1mm thick wall putty complete all as specified and directed. |
| 31 | Preperation of newly plastered surfaces of wall, Chalk whiting on plastered surfaces and applying two coat of cement base paint over 1mm thick wall putty complete all as specified and directed. |
| 32 | Material and Labour for preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed |
| 33 | Supply and fixing Factory made pressed steel frames of size 105 x 60 mm for doors fabricated from 1.25 mm thick sheet, with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. and one shop coat of priming including plain cement concrete 1:3:6 type C-0 (using 12.5 mm graded mechanically crushed stone aggregates) in filling of door frame complete ,all as specified and as directed. |
| 34 | Supply and fixing 35mm thick factory made Plain framed, panelled shutter with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated including two coats of synthetic enamelled paint over a coat of primer etc complete all as specified and directed. |
| 35 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directedNote : Rates are included for M.S. hold fast/ lugs or SS dash fasteners. |
| 36 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and directed.(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 37 | Supply and fixing mild steel box type window frame (with hold fast) including side hung shutters with projecting type hinges, handles, tower bolts and peg stay complete with glazing bars and ms flats for fixing of wire mesh, dovetailed or welded including one shop coat of zinc chromate primer and two coats of approved colour synthetic enamel paint after fixing to frame etc complete all as specified and as directed. (Glass or wiremeshshall be paid separately) |
| 38 | Supply and fixing mild steel ventilator frame (with hold fast) including top hung shutter with hinges, handles, tower bolts, steel peg stay etc complete with glazing bars, dovetailed or welded including one shop coat of zinc chromate primer and two coats of approved colour synthetic enamel paint after fixing to frame etc complete all as specified and as directed. (Glass or wiremeshshall be paid separately) |
| 39 | Supply and fixing 4.80 mm thick Sheet glass, ordinary quality and glazing with oil putty in shutters/frames in any shape and size complete all as specified and as directed. |
| 40 | Supply and fixing 4.80 mm thick obscured or frosted glass, ordinary quality and glazing with oil putty or fixing in aluminium shutters/frames in any shape and size complete all as specified and as directed. |
| 41 | Supply and fixing stainless steel 100 mm long butt hinges medium weight and fixed with stainless steel screws complete all as specified and directed. |
| 42 | Supply and fixingstainless steel 200mm long barrel tower bolt and fixed with stainless steel screws complete all as specified and as directed. |
| 43 | Supply and fixing stainless steel 150mm long handles and fixed with stainless steel screws complete all as specified and as directed. |
| 44 | Supply and fixing stainless steel 300mm long sliding door bolts, plate type, with bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed |
| 45 | Supply and fixing for floor door stopper of aluminium alloy body and tongue , anodised with hard drawn steel spring over all length of cover plate 150mm complete all as specified and directed. |
| 46 | Material and Labour for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified & directed complete all as specified and directed. |
| 47 | Material and Labour for Glazed ceramic coloured tiles 450X300X7mm thick,laid in vertical surfaces, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed. |
| 48 | Material and Labour for non skid ceramic joint less coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. , laid over 15mm thick screed bed in cement mortar 1:6 incl joining in neat cement slurry and pointed in coloured cement to match with shade of tiles complete all as specified and directed. |
| 49 | Supply and fixing, water storage tank 1000 ltr capacity HDPE Triple layer, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, ISI marked, complete all as specified and directed |
| 50 | Supply and fixing 15 mm bore ball brass valves high pressure with polythene float and flynut complete screwed or iron etc complete all as specified. |
| 51 | Supply and fixing 15mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and directed. |
| 52 | Material and Labour for 15mm bore GI tubing (medium grade) with all fittings (elbows, Tee, sockets, union, plugs, reducers etc) and fixed complete to walls and ceiling or laid in floors/roofs etc complete all as specified and as directed. |
| 53 | Material and Labour for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth etc complete all as specified and as directed. |
| 54 | Supply and fixing 15 mm dia bib taps cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and as directed. |
| 55 | Supply and fixing 15mm bore angle cock, cast copper alloy screwed down ,fancy type chromium plated with crutch or butter fly handle, screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.. |
| 56 | Supply and fixing Vitreous China wash hand basin white with pedastal flat back size 630x450 mm, including fixing brackets and PVC waste pipe with coupling, cutting for and pinning in ends of brackets or errecting stand complete all as specified and as directed. |
| 57 | Supply and fixing for vitreous china squatting pan (Orrisa pattern), white, size 680 x 470mm with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti- syphonage pipe including trap set in concrete etc complete all as specified and directed. |
| 58 | Supply and fixing vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom and cover, stainless steel toilet seat/ commode jet spray with miniumum 1 mtr length flexible pipe and mild steel chromium plated or aluminised hinging device (excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc., complete all as specified and directed. |
| 59 | Supply and fixing for 10 ltr capacity PVC valveless syphonic action type, flusing cistern, low level, white, with inlet, ball valve, float and handle including brackets fixed etc including PVC flushing pipe 32mm dia complete all as specified and as directed. |
| 60 | Supply and fixing 15mm bore PVC connection with brass nut of length 450mm complete all as specified and as directed. |
| 61 | Supply and fixing 15mm bore pillar tap, chromium plated, cast copper alloy with capstan head, screwed down, high pressure, with or without lettered ‘Hot’ or ‘Cold’ complete all as specified and directed. |
| 62 | Supply and fixing health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 63 | Supply and fixing toilet paper holder with flat recessed type stainless steel complete all as specifed and directed |
| 64 | Supply and fixing mirror of selected quality glass, bevelled edge, mounted on 6mm thick AC building board or plywood commercial fixed to wooden plugs with CP brass screws & cup washers etc complete all as specified and directed. |
| 65 | Supply and fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 66 | Supply and fixing Towel rail 600mm long of mild steel chromium plated fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) etc complete all as specified and as directed. |
| 67 | Supply and fixing Soap dish fixed to plugs with chromium plated brass screws etc complete all as specified and as directed. |
| 68 | Supply and fixing 75 mm dia PVC(SWR) floor/ nahani trap, with CP grating including jointing with solvent cement etc complete all as specified and as directed. |
| 69 | Supply and fixing in repair 110 mm dia PVC(SWR) 'P' trap including jointing with solvent cement etc complete all as specified and as directed. |
| 70 | Supply and fixing 75mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 71 | Supply and fixing 75mm dia PVC (SWR) bends any radius and jointing etc complete all as specified and directed. |
| 72 | Supply and fixing 75mm dia junction single (Single T) equal or unequal and jointing etc complete all as specified and directed |
| 73 | Supply and fixing 110 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 74 | Supply and fixing 110mm dia PVC (SWR) bends any radius and jointing etc complete all as specified and directed. |
| 75 | Supply and fixing 110mm dia PVC (SWR) bends with access doors any radius and jointing etc complete all as specified and directed. |
| 76 | Supply and fixing of grating doom 125 mm dia with waste hole of stainless steel complete all as specified and directed. |
| 77 | Material and Labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement, including forms moulds, mitred/stopped ends etc complete all as specified and directed. |
| 78 | Material and labour for cement concrete 1:3:6 type C2 using 40 mm graded aggregate in bed to drain pipes including packing under, and haunching in against the side of pipes after they are laid and tested for 150mm dia bore pipe complete all as specified. |
| 79 | Material and Labour for Cutting GI pipes in position and reducing to required length for insertion of new tees, branches, Mechanical Joints etc, all as directed. Size of pipe 80 bore complete all as specified and directed. |
| 80 | Supply and fixing GI tubing medium grade, ISI Marked conforming to IS 1239 Part-I 2004, 20mm bore with and including all fittings such as bends , elbows,tees, short length, socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc including testing complete all as specified and as directed. |
| 81 | Supply and fixing Gun metal, globe or gates valves, with iron wheel head, screwed down, high pressure, heavy duty, ISI marked, screwed both ends for iron pipe or for union of 20 mm bore complete all as specied and directed.Make- Cat No PGT-1402 of PRIMA or equivalent model in makes mentioned in Appendix 'B' of tender document. |
| 82 | Supply, laying, fixing Double walled corrugated HDPE duct pipe of 50mm outer dia confirming to IS-14930 (Part-II) of approved colour with fittings for cable protection complete all as specified and as directed. |
| 83 | Material and Labour for passing through pipe testing and commissioning of 1100 Volts grade Heavy duty PVC sheathed armoured cable LT, XLPE insulated aluminium conductor multi stranded served with inner sheating of PVC tape armored with galvanised steel wire or tape and overall PVC sheathed of size 10 Sqmm nominal cross sectional area 2 core with suitable glands and lugs as per site requirement confirming to IS specification, complete all as specified and directed . Please Enable Macros to View BoQ information |
| 84 | Material and Labour for passing through pipe testing and commissioning of 1100 Volts grade Heavy duty PVC sheathed armoured cable LT, XLPE insulated aluminium conductor multi stranded served with inner sheating of PVC tape armored with galvanised steel wire or tape and overall PVC sheathed of size 10 Sqmm nominal cross sectional area 2 core with suitable glands and lugs as per site requirement confirming to IS specification, complete all as specified and directed . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender