Tender For Provision Of Plain Cement Concrete Hardstanding For Convoy Ground At 80 Inf Bde And Provision Of Covered Shed Verandah At Bldg No P-68 At Ads-1 (Ex 325 Fd Hosp) Under Age B/R Dett-A Of Ge 862 Ews
Tender Value
45.66 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
4 days left
EMD
91400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
rajouri → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Plain Cement Concrete Hardstanding For Convoy Ground At 80 Inf Bde And Provision Of Covered Shed Verandah At Bldg No P-68 At Ads-1 (Ex 325 Fd Hosp) Under Age B/R Dett-A Of Ge 862 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' Part-I (B/R Works)Surface execavation not exc. 30 cm deep & average 15 cm deep and getting out in any type of soil, complete all as specified and directed. |
| 2 | Excavation in trenches for drain not exc 1.5m wide and not exc 1.5 m in depth in any type of soil, complete all as specified and directed. |
| 3 | Rolling and consolidating old surfaces in cutting with power rollers of capacity 8 to 12 tonne, complete all as specified and directed. |
| 4 | M&L for hardcore of broken stone or boulders of guage nexc 63mm deposited, spread & levelled in layers nexc 15cm thick, watered and rammed to a true surface, complete all as specified and directed. |
| 5 | M&L for plain cement concrete type D-2 ( 1:4:8) (using 40 mm graded crushed stone aggregate) as in sub base, mass concrete and foundation filling,trenches, complete all as specified and directed. |
| 6 | S&F polythene film 150 micron thick laid over and including a coat of bitumen primer @0.30 to 0.50Kg/Sqm, complete all as specified and directed. |
| 7 | M&L for cement concrete work (PQC) in pavement / hardstanding of flextural strength 40 kg/per square centimeter in field using 400 kg of cement per cubic meter ,thickness of concrete 25 cm or less incl all neccessary formwork, complete all as specified and directed.Note : The concreting shall be allowed only with Batching plant of self loading Concrete mixer and contractor shall not claim extra money for use of Vibrator. |
| 8 | Finishing surfaces of conrcete pavement by brooming, complete all as specified and directed. |
| 9 | M&L for forming 12mm thick Expansion joints filled with pre-formed bituminious filler and top 30mm primed and sealed with sealing compound Grade ‘A’, thickness of concrete slab 250mm including providing 20 mm dia mild steel dowel bars 50cm long (25cm in each slab) with ferrules, spaced at 300 mm centres, including boring form work and preformed filler for dowels, complete all as specified & directed. |
| 10 | M&L for forming contraction (dummy) joints 65x10mm wide,filled with sealing compound for grade A, complete all as specified and directed. |
| 11 | M&L for 25 mm thick sand filling under floors or in foundtion including watering and consolidation for laying inter locking tiles, complete all as specified and directed. |
| 12 | M&L for machine pressed precast concrete interlocking paver block of any shape and size approved by EIC, ISI marked (IS:15658-2006) 80mm thick, M-40 grade, in paths and hardstanding, with colored cement laid tightly over and joints filled with dry sand complete all as specified and directed.Note. (i) Make and shade (zigzag,dumbell and fan pattern tiles.(ii) Sand cushioning shall be measured in respective item. |
| 13 | M&L for cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) in copings,kneelers, Apex stones, benchings, rounded or chamfered on edges including necessary formwork, complete all as specified and directed. |
| 14 | M&L for PCC type C1 1:3:6 (using 20mm graded crushed stone aggregate) as in surface channel and drain beds including all necessary form work, complete all as specified and directed. |
| 15 | Extra for forming fair finished drain or channels 30 cm inner girth in cement concrete using extra cement including forms, mould, mitred/stopped ends etc, complete all as specified and directed. |
| 16 | M&L RCC (1:2:4) type B-1 (using 20mm gradded stone aggregate) as in beams, deck slabs, chajjas and in shelves and like, complete all as specified and directed. |
| 17 | Formwork to sides and soffits of floor or roof beam, beam hunching, girders, lintel, cantilevers, shelves including suports,overhangs etc, complete all as specified and directed. |
| 18 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bend to shape required, including cranking ,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 19 | All as per Item No 18.00 here-in-before but 5mm to 10mm dia. |
| 20 | Removing excavated soil n exc 50 mtr and depositing where directed at a level of n.exc 1.5 m above the starting point, complete all as specified and directed. |
| 21 | Returning filling in including spreading levlling, watering and well ramming in layers nexc 25cm thick, complete all as specified and directed. |
| 22 | M&L for moorum, Red bajri/ shingle as in floors, pavings, berms, laid in layers not exceeding 15 cm thickness, spread levelled and well rammed / rolled including watering, complete all as specified and directed. |
| 23 | M&L for reinforced concrete pipe 450 mm dia, class NP-2 laid and jointed complete with collars, complete all as specified and directed. |
| 24 | M&L for 110 mm bore PVC (SWR) Pipes Single socketed, length with rubber ring joint, laid in trenches or in floor etc, complete all as specified and directed. |
| 25 | M&L for brick work in cement mortar (1:6) using old size sub class 'B' bricks in walling, straight or curved on plan exc 6m mean radius, complete all as specified and directed. |
| 26 | M&L for Reinforced Cement Concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in foundation,footings, plinth beam, complete all as specified and directed. |
| 27 | M&L for Reinforced Cement Concrete 1:2:4 type B-1 nominal mix (using 20mm graded stone aggregate) as in columns, pillars, struts etc, complete all as specified and directed. |
| 28 | M&L for Reinforced Cement Concrete 1:2:4 type B-1 nominal mix (using 20mm graded stone aggregate) as in lintel band etc, complete all as specified and directed. |
| 29 | Form work to sides of foundation footing ,bases for coloumns raft footing and bases or plinth beams and similar works flat or better rough finish, complete all as specified and directed. |
| 30 | Form work to sides of pillars columns of square or rectangular finished rough, complete all as specified and directed. |
| 31 | Formwork to bottom and sides of concrete roof bands and lintel bands and similar work with rough finished surface of concrete, complete all as specified and directed. |
| 32 | S&F mild steel roof truss (framed), trussed purlins, crane gantries rails and fastenings and heavy bracket framing (Beam, tee, angle, cnanelor flat section gusset plate) including distance piece, cleats etc and welding if required, complete all as specified and directed. |
| 33 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of approved colour (multi colour pattern as approved by GE) having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 34 | M&L for 25 mm thick PCC type B-0 (using 12.50 mm graded crushed stone aggregate) as in sub base for laying floor finishes, complete all as specified and directed. |
| 35 | S&F vetrified ceramic tiles in light shade of size 600x600x10 mm thick as in floor set and jointed in neat cement slurry and pointing in white or coloured cement to match the colour of tiles over and including 10mm thick screed bed in in 1:4, complete all as specified and directed. |
| 36 | S&F vetrified ceramic tiles in light shade of size 600x600x10 mm thick as in skirting, verticle surface and jointed in neat cement slurry and pointing in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in CM 1:3, complete all as specified and directed. |
| 37 | S&F 1.25 mm thick pressed steel frames of size 125mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 38 | S&F plain framed, panelled shutters (any number of panels) with pannel of timber flat on both sides (feather edged) or of veneered particle board with commercial face veneers 35 mm thick 2nd class hard wood supplied and fitted to chowkats, complete all as specified and directed. |
| 39 | M&L for 35 mm thick second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc, size of members of shutter as specified in SSR Part-I, Section 8, clause 8.20 (a), fitted to chowkats, complete all as specified and directed. |
| 40 | S&F factory made MS tubular Box type window of MS rolled steel section conforming to IS-1038 and shall be ISI marked manufactured by ISI approved manufacturer, openable frames shall be fabricated of sections as approved by Engr-in-Charge corner welded to form a solid fused welded joint handles shall be of z section welded with openable frame box steel section (consisting of both shutter glazed shutter and gauge shutter complete) used in outer frame shutter frame and central frame shall be ERW section of 16 gauge with fixing lugs to be fixed as per provision of IS-1038 except that top lugs shall not be provided, all shutters of windows shall be provided with 4 Nos friction free hinges, 2 Nos 75 mm tower bolts to each leaf of window one at top and one at bottom welded on 3 mm thick steel sheet piece of suitable size which shall be in turn welded to z section f steel window to provide suitable arrangement of using tower bolt and 1 No bow handle in each shutter. Glazed shutter and, gauged shutter of window, mild steel casement stays 300 mm with hinged joint and two plates with studs complete all as specified with all fittings and fixtures without glazing bars and including 3mm sheet glass in glazed shutter and GI wire mesh of 0.56 nominal dia and average width of aperature 1.18 mm in gauged shutter, complete all as specified and directed. |
| 41 | S&F stailess steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks of galvanised wire staples, complete all as specified and directed. |
| 42 | S&F 150mm size aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and directed. |
| 43 | S&F 150mm size extruded aluminium handles fabricated type, anodised and fixed, complete all as specified and directed. |
| 44 | S&F aluminium alloy anodised sliding door bolt with fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed of size 300 mm, complete all as specified and directed. |
| 45 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and incl. mixing water proofing compound and finished even and smooth without using extra cement, complete all as specified and directed. Note: Cost of WPC shall be measured and paid seperately. |
| 46 | Supply only liquid type water proofing compound confirming to IS, complete all as specified and directed. |
| 47 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished smooth and even without using extra cement, complete all as specified and directed. |
| 48 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection laid to slope of 1 in 12 and finishing cement concrete surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges where directed and providing 6 mm thick joints through the thickness of plinth protection duly filled with mastic filling of one part of hot bitumen 85/25 grade and three parts of fine sand (all by weight), complete all as specified and directed. |
| 49 | M&L for preparation of newly plastered wall surface and applying two coats of exterior weather proof paint in approved colour (multi colour pattern as approved by GE) over a coat of alkali resistant primer, complete all as specified and directed. |
| 50 | M&L for preparation of newly plastered surface and apply two coats of oil bound distemper, complete all as specified and directed.Note- Painting shall be done by Painting roller. |
| 51 | M&L for 3 mm thick wall care putty on wall, complete all as specified and directed. |
| 52 | M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 53 | M&L for preparation of new steel surface of any desc over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 54 | Schedule 'A' Part-II (E/M Works)M&L for Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm (nominal area) single core FRLS, PVC insulated 1100 volts grade multi strand unsheathed copper conductor unsheathed in and including rigid PVC conduit pipe not less than 20mm dia (medium grade) concealed in wall/ ceiling surface complete with all accessories including pressed steel terminal boxes of suitable size ISI marked for mounting of switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet as top cover, and 1.5 sqmm (nominal area) single core FRLS, PVC insulated 1100 volts grade multistraded unsheathed copper conductor cable as earth wire upto common earth and connected to earth dolly including cutting, chasing and making good to the disturbed surfaces to match with the existing specification complete all as specified. Note:- Three run copper conductor of required size and one run of PVC conduit pipe measured as one unit and also colour coding of wiring to be followed as red/ yellow/blue for phase, black for neutral and green for earth. |
| 55 | One light point/ fan point controlled by one switch. |
| 56 | One socket outlet 6 Amp 2/3 pin point controlled by one switch one way on same switch board. |
| 57 | One socket outlet 6 Amps 2/3 pin point controlled by one switch one way on independent board |
| 58 | All as per item No 54.00 here-in-before, but point wiring 2.5 sqmm for switch socket combination 15Amps point controlled by one switch. |
| 59 | S&F switch piano flush type 6 Amps SP one way 230 volts, complete all as specified and directed. |
| 60 | S&F switch piano flush botton single pole, one way 16 Amps 240 volts, complete all as specified and directed. |
| 61 | S&F socket outlet 2 in 1, 6 Amps, 3 Pin, flush type suitable for 230 volts, complete all as specified and directed. |
| 62 | M&L for ceiling rose 3 phase, surface bakelite 2 to 3 terminals, PVC/ Polycarbonate, isolated body, complete all as specified and directed. |
| 63 | M&L for LED Tube light fitting, 1x 20 watts. Decorative ultra slim linear LED lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficient ready to use pack complete rewired, Premium 20 W LED batten, connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm, complete all as specified and directed. |
| 64 | S&F Lamp holder insulated body PVC/ Polycabonate type with back plate including 9 watt LED bulb complete all as specified and directed. |
| 65 | S&F LED light fitting 1 x 9/ 10 watt bulk head luminairies including LED light dirver holder etc complete with all accessories and including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. |
| 66 | M&L for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-42 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair, including removing old/unsv, all as specified and directed. Note:- MCBs will be measured separately. |
| 67 | S&F MCB SP 240 volt any rating from 6 to 32 Amps conforming to IS 8828 of 1996, with rupting capacity 10KA including providing thimble for out goint cable complete all as specified and directed. |
| 68 | S&F MCB SPN 240 volt any rating from 6 to 32 Amps conorming to IS 8828 of 1996, with rupting capacity 10KA including providing thimble for out goint cable complete all as specified and directed. |
| 69 | Supply, laying and connecting and testing of service cable of size 10sqmm 2 core, 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with an inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1mtr apart including 4mm suspension wire or drawn in and including medium grade non metalic rigid PVC conduit as per site requirement, flat or cicular after taking down old unserviceable cable including other accessories, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender