Tender For Renovation Of Phs Services & Other Allied Work At Gmhs-Maloya Colony, Chandigarh. (Ibm No. W1/2026/26492).
Tender Value
2.44 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
5 days left
EMD
48916
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Phs Services & Other Allied Work At Gmhs-Maloya Colony, Chandigarh. (Ibm No. W1/2026/26492).
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil. |
| 3 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m |
| 4 | All kinds of soil. |
| 5 | Pipes, cables etc. not exceeding 80 mm dia. |
| 6 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level |
| 8 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 9 | 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) |
| 10 | Brick work with F.P.S. bricks of class designation 7.5 in foundation and plinth in: |
| 11 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 12 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels |
| 13 | Granite of any colour and shade |
| 14 | Area of slab over 0.50 sqm |
| 15 | Providing and fixing Ist quality ceramic glazed wall tiles of size 600x300mm and above conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 16 | Providing and fixing ISI marked IS:1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete : |
| 17 | 125x65x2.12 mm |
| 18 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 19 | 250x16 mm |
| 20 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 21 | 150x10 mm |
| 22 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 23 | 100 mm |
| 24 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: |
| 25 | Profile B |
| 26 | Fixing with adjustable lugs with split end tail to each jamb |
| 27 | Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 28 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 29 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 30 | Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 31 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 32 | 1:3 (1 cement: 3 fine sand) |
| 33 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 34 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour |
| 35 | Old work (one or more coats) |
| 36 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 37 | One or more coats on old work |
| 38 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 39 | Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) |
| 40 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead |
| 41 | Of area 3 sq. metres and below |
| 42 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 43 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require |
| 44 | White Vitreous China Wash Basin size 630 X 450 mm with a single 15 mm C.P. brass pillar tap |
| 45 | Providing and fixing white viterious china pedestal type (European type/ wash down type) water closet pan |
| 46 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 47 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 48 | 32 mm dia |
| 49 | Providing and fixing soil, waste and vent pipes : |
| 50 | 100 mm dia |
| 51 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 52 | 75mm diameter : |
| 53 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 54 | Providing and fixing heel rest sanitary bend |
| 55 | 100 mm dia |
| 56 | Sand cast iron S&S as per IS - 3989 |
| 57 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 58 | 100x100x100 mm |
| 59 | Sand cast iron S&S as per IS - 3989 |
| 60 | 75x75x75 mm |
| 61 | Sand cast iron S&S as per IS - 3989 |
| 62 | Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete : |
| 63 | 100 mm |
| 64 | Sand cast iron S&S as per IS - 3989 |
| 65 | Providing and fixing terminal guard: |
| 66 | 100 mm |
| 67 | Sand cast iron S&S as per IS - 3989 |
| 68 | Providing and fixing collar : |
| 69 | 100 mm |
| 70 | Sand cast iron S&S as per IS - 3989 |
| 71 | 75 mm |
| 72 | Sand cast iron S&S as per IS - 3989 |
| 73 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : |
| 74 | 100 mm |
| 75 | 75 mm |
| 76 | Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : |
| 77 | 100 mm dia. |
| 78 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, incl. cost of cutting and making good the walls and floors. |
| 79 | 100 mm inlet and 75 mm outlet |
| 80 | Sand Cast Iron S&S as per IS- 1729 |
| 81 | Provivding and fixing of PTMT 15 mm urinal spreader size 95x69x100mm with 1/2\\" BSP thread and shapes, weighhing not less than 60 gms |
| 82 | Providing and fixing PTMT urinal cock of approved quality and colour. |
| 83 | 15 mm nominal bore, 80 mm long, 42 mm high and 30 mm wide with BSP female threads weighing not less than 48 gms. |
| 84 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc |
| 85 | 15 mm dia nominal bore |
| 86 | 25 mm dia nominal bore |
| 87 | 32 mm dia nominal bore |
| 88 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 89 | 15 mm dia nominal bore |
| 90 | 20 mm dia nominal bore |
| 91 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 92 | 25 mm nominal bore |
| 93 | 20 mm nominal bore |
| 94 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 95 | 30 cm length |
| 96 | 15 mm nominal bore |
| 97 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : |
| 98 | 15 mm nominal bore |
| 99 | 20 mm nominal bore |
| 100 | 25 mm nominal bore |
| 101 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 102 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 103 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 104 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete |
| 105 | 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. |
| 106 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
| 107 | Cutting holes up to 30x30 cm in walls including making good the same: |
| 108 | With common burnt clay F.P.S. (non modular) bricks |
| 109 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. |
| 110 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. |
| 111 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: |
| 112 | 100x100 mm size P type |
| 113 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 114 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality |
| 115 | HD-20 |
| 116 | Circular shape 560 mm internal diameter |
| 117 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: |
| 118 | Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : |
| 119 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 120 | Supplying and fixing 5A to 32 A rating, 240/415 V, 10 KA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 121 | Single Pole and neutral |
| 122 | Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests complete in all respect |
| 123 | Providing and fixing flush valve for OWC and EWC seats. |
| 124 | Dismentaling glazed wall tiles including plaster and disposal of malba away from site at sutable making site for dumping of malba complete in all respect. |
| 125 | Providing & fixing looking glass of size 22\\"x16\\" with bevelled edge all side of approved make |
| 126 | Providing and fixing HCI P-Trap 100 mm. |
| 127 | Providing and fixing of C.P. soap dish of make Viking, jainko, Cera or equivalent complete in all respects |
| 128 | Providing & fixing Stainless steel grab rail of size 32 mm dia for disable toilets complete in all respect |
| 129 | Providing PVC pipe of 6kg/cm2 pressure various size complete in all respect |
| 130 | Size 90 mm 1/d |
| 131 | Providing and fixing of drinking water cooler suitable for operation on 230volts+10% 50cycle single phase AC Supply storage Type 400 ltr. capacity and cooling capacity 150 ltrs / complete in all respect to EIC of approved make. |
| 132 | Providing and fixing Water filter -cum -Purifier including installation charges 3Ltrs/ Minute make Aquaguard/ Waves |
| 133 | Providing and fixing of automatic line voltage Stablizer of 5 KVA complete in all respect to the entire satisfaction of the EIC approved Make |
| 134 | Providing, Installing, Testing, Commissioing of mono block pumping 2 HP set single phase and following para metre including starter piping connections & other allied works camplete in all respect of make kirlosker/ABB/Crompton graves. Head 30 Mtr complete in all respect |
| 135 | Providing and installation of sub copper cable 3x2.5 mm² complete in all respect make as approved make list |
| 136 | Providing and fixing ISI Marked water proof 30 mm thick flush door shutters of pine frame sesoned and treated with seasoned pine filler and 2.5 mm gurjan core, fungus resistant , eco friendly with 1mm thick laminated on both side with phenol formaldehyde resin conforming to IS: 848;complete in all respect. |
| 137 | Provding and fixing SFRC G.T.cover and frame size 375X375X25 mm thick made out of MS angle iron size 25X25X5 mm thick with fixing wire mesh of size 1\\"X1\\" of 10 gauge including cutting,, welding and fixing with cement concrete 1:1 1/2:3. |
| 138 | Providing & fixing IRC encloser jali of mesh size 40 mm x 40 mm of 10 gauge with frame work of MS angle 40x40x5 mm and MS flat 32x5 mm including painting with two coats of synthetic enamel paint over a coat of steel arrangeent all as specified. (Size of angle grid should not be more than 12 sft) with two coats of black paint as per site requirement as providing and fixing Jali complete in all respect Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender