Tender For Urgent Repair And Waterproofing Of Roof Of Center For Police Administration(Uieass), P.U. C Us Sector-14 Chandigarh.
Tender Value
22.05 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
20 days left
EMD
43000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Urgent Repair And Waterproofing Of Roof Of Center For Police Administration(Uieass), P.U. C Us Sector-14 Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Civil Work |
| 2 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 5 km for all lifts, complete as per directions of Engineer-in-charge. (Ref:- 1.1.18) |
| 3 | Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates asper ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint to ASTM 6063). |
| 4 | Roof Joint of 100 mm gap (Ref:- 5.46.1) |
| 5 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) and mixing of integral water proofing compund as per standard design. |
| 6 | In 75x75mm deep chase (Ref:- 12.21.1) |
| 7 | Making khurras 45x45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete. (Ref:- 12.22) |
| 8 | Regrading terracing of mud phuska covered with tiles or brick, in cement by dismantling tiles or bricks, removing mud plaster preparing the surface of mud phaska to proper slope relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand ) including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 metres lead. (Ref:- 14.13) |
| 9 | Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska : (Ref:- 14.81.1) |
| 10 | Removing mortar/Mud from bricks/tiles and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured) (Ref:- 15.8.3) |
| 11 | Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrance black finished reinforced with glass fibre matt consisting of a cost of bitumen primer for bitumen membrance @ 0.40 litre/ sqm by the same membrence manufacture of density at 25 c. 0.87 -0.89 kg / Litre and viscosity 70 -160 cps. over the primer coat layer of membrane shall be laid using butane touch and sealling all joints etc. and preparing the surface complete . The vital physical aand chemical parametres of the membrane shall be as under : joints strength longitudinal and transverse directon at 23°c as 350/300N/ 5cm Tear strength in longitudinal and transverse direction as 60/80N . Softening point of membrane not less than 150°c Cold flexibility shall be up to -2 c when tested in accordance with ASTM D -5147 . The laying of membrene shall be got done through the authorised applicator of the manufacture of membrene . |
| 12 | up to 3mm thick (Ref:- 14.90.1) |
| 13 | Removal of old existing water proofing treatment i.e. tarfelt sheet up to 3mm thickness, old bitumen layer, loose dust particles, algae, green vegetation by means of steel wire brush/ scrapping paper. After cleaning, minor cracks or holes to be filled with modified polymer mortar mixed with cement as per manufacurer's specification. Complete in all respects to trhe entire satisfaction of the engineer in-charge. ( Ref:- N.S) |
| 14 | Dismantling old PCC(any Mix) gola, band, haunch,drain etc. and cleaning the surface for making new surface at per site. Complete in all respects to the entire satisfaction of the engineer in-charge.( Ref:- N.S) |
| 15 | Dismantling old plaster (12 to 25mm thickness wherever required) or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.( Ref:- N.S) |
| 16 | Supply of 40mm thick F.P.S. (confirming IS:standard)Brick ROOF tiles. (Ref:- N.S.) |
| 17 | Providing and laying 20mm thick cement plaster of mix :1:4 (1 cement: 4 coarse sand) to be mixed with integral water proofing compound as per manufacturer's specification. Complete in all respect to the entire satisfaction of the engineer-in-charge. ( Ref:- N.S) |
| 18 | Labour for removing & refixing of water storage tanks including all fittings along temporary fittings and level. Complete in all respect to the entire saticification of the engineer in -charge. (Ref:- N.S.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender