Tender For Construction Of Day Care Phc Building At Balidokan Under Kakatpur Block In The District Of Puri For The Year 2025-26 Under Xvfc.
Tender Value
1.25 Crore
Estimated cost
Bid Submission
29 Sep 2026
3 days left
EMD
1.25 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Puri → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Day Care Phc Building At Balidokan Under Kakatpur Block In The District Of Puri For The Year 2025-26 Under Xvfc.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in all kind of soil including all cost etc within initial leads and lifts complete. |
| 2 | Filling foundation and plinth with sand well watered and rammed including all costs etc complete. |
| 3 | Providing and laying Cement concrete(1:3:6) in foundation and floors & using 4mm size clean hard broken granite metal of approved quality etc. complete . |
| 4 | R.C.C.(M-20) using 12mm. Size C.B.chips including hoisting and laying nad compacting etc complete with centering and shuttering excluding cost of steel etc complete as directed by the Engineer-In -Charge. |
| 5 | Column Footing |
| 6 | Plinth Beam |
| 7 | Lintel ground floor |
| 8 | Lintel 1st floor |
| 9 | Chajja |
| 10 | Chajja 1st floor |
| 11 | Column & beam Ground floor |
| 12 | Column & beam 1st floor |
| 13 | Roof slab Ground floor |
| 14 | Roof slab stair case1st floor |
| 15 | stair case Ground floor |
| 16 | Cutting,bending, binding of HYSD (Fe-415) Steel including all cost , cost of carriage etc. complete. |
| 17 | Ground Floor |
| 18 | 1st floor |
| 19 | Fly Ash brick masonry in cement mortar (1:6) on Superstructure using bricks of 10\\" size having a crushing strength of not not less than 35 kg per Sq.cm with dimensional tolerance + 8 percent after immersing Bricks for six hours in waters before use with all necessary projections, splays cutting, circular moulding, chamfering, corbelling, watering, curing etc. complete including cost, conveyance, royalties, taxes of all materials, cost of all labour, all T&P etc. complete in all respect as directed by the Engineer-in-charge. |
| 20 | In Foundation & Plinth |
| 21 | in superstructure |
| 22 | 1st floor |
| 23 | 20mm thick cement plaster(1:6) for stone work etc. complete. |
| 24 | Providing 6mm thick CP (1:4) to RCC surfaces finished smooth including closed deep chiping and slurry treatment etc complete |
| 25 | Ground floor |
| 26 | 1st Floor |
| 27 | 12mm thick in C.M.(1:6) over brick masonary to the smooth surface including all costs etc. complete. |
| 28 | Ground floor |
| 29 | 1st floor |
| 30 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost,conveyance, royalties and taxes of all materials with cost of all labour.,T&P, and scaffolding requried for the work etc. complete in all respect as directed by the Engineer in charge. |
| 31 | Ground floor |
| 32 | 1st floor |
| 33 | Fixing fully vetrified tile in floor on 20mm thick bed (1:4) c.m.jointed with cement slusy mixed with pigment to match the shade of the tiles including rubbing & polishing complete including cost of tiles ( Plain Ivory ) |
| 34 | Fixing vetrified tile in Wall Or Dado with 12mm thick cement plaster (1:3) c.m.jointed with cement slusy mixed with pigment to match the shade of the tiles including rubbing & polishing complete including cost of tiles.(printed series) |
| 35 | Ground floor |
| 36 | Supplying ,fitting and fixing of Two track UPVC slidding window of approved make with 6mm thick glass of approved quality complete with frame,shutters and all fittings and fixtures. |
| 37 | Supplying fitting , fixing of Al. door with OEL Anodized AL. door section of 9202 as vertical member, 9201 as top member & 9200 as bootom & middle member and 6mm plain glass in top portion with 6mm thick black glass fixed on door frame etc. complete. |
| 38 | Supplying and Fixing of G.I. Grills, M.S.Doors, M.S. Gate etc including cost,conveyance of all materials and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge |
| 39 | Finishing plastered surfaces of walls with Acrylic putty (water based) of approved make and finishing the surface smooth and even by sand papering to receive paint in walls, at all heights with staging whereever necessary with cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.(two coat putty +one coat priming + two coat plastic paint) |
| 40 | Ground floor |
| 41 | 1st floor |
| 42 | Wall painting two coats to walls with plastic emulsion paint of approved shade on old work one coat including cost of paint including cost of all materials, labour, T&P required for the work as per the direction of the Engineer-in-Charge. |
| 43 | Ground floor |
| 44 | 1st floor |
| 45 | Finishing walls with weather coat paint of approved shed in new work 2 coats to give an shade including cost of paints. |
| 46 | Ground floor |
| 47 | 1st floor |
| 48 | Painting two coats with any approved enamel paint over a coat of priming to new wood/ Iron work including cost conveyance, taxes of all materials to site and all labour charges required for the work etc. Complete in all respect as per direction of the Engineer in charge. |
| 49 | Ground floor |
| 50 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing of ramp, in the walls of toilet for sick personnel using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance of all materials, cost of all labour, T&P etc. required for the complete in all respect as per direction of the Engineer-in-charge |
| 51 | Ground floor |
| 52 | P.H WORKS |
| 53 | Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30 in depth and depositing the soil as per direction of EIC.Initial lift upto 1.50m |
| 54 | From 1.50m to 3.00m depth |
| 55 | Supplying all materials, labour T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC |
| 56 | Supplying all materials labour T&P and providing c.c. (1:3:6)using 4cm hg metal including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC. |
| 57 | Supplying all materials labour, T&P and providing c.c. (1:1.5:3) using 12mm hg chips including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC |
| 58 | Supplying all materials labour T&P and providing brick work with Fly ASh Bricks having c. s. not less than 75Kg/cm2 with dimensional tolerance +-8% in cm (1:3)including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and dir of EICIn F&P in cm (1:4) |
| 59 | Supplying all materials labour T&P and providing c.c. (1:1.5:3) using 12mm hg chips for RCC works including hoisting laying, watering, curing, conveyance of all materials to work site payment of royalty taxes etc. all complete as per specification and direction of EIC |
| 60 | Supplying all materials labour T&P and providing MS reinforcement for RCC works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire and 18 to 20 gauge conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.- |
| 61 | Supplying all materials labour T&P and providing rigid and smooth centering and shuttering for RCC works including false work and dismantling them after casting including conve4yance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC- |
| 62 | Supplying all materials labour T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.12mm thick CP (1:3) |
| 63 | Supplying all materials labour T&P and providing cement punning including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC. |
| 64 | Same as above item 20mm C.P in 1:3 |
| 65 | Supplying all materials labour T&P and providing cement flush pointing to brick masonry (1:3) including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC |
| 66 | Filling F&P with excavated materials including watering and ramming as per direction of EIC |
| 67 | Supplying all labour materials T&P and fixing of 2” RCC baffle wall precast with cc (1:1.5:3) using 12mm bhg chips for fitted to septic tank as per PH specification and direction of EIC |
| 68 | Supplying all materials labour T&P and providing fitting and fixing SW Tee in wall including filling the necessary with cement concrete (1:2:4) with 12mm size hg chips all complete materials to as per specification and dir of EIC.100x100x100mm PVC Tee/Y |
| 69 | Supplying all labour materials T&P and fixing of MS step iron in 12mm dia MS steel bar and fixing into walls of septic tank duly embedded in c.c. (1:3:6) all complete as per PH specification and direction of EIC- |
| 70 | Supplying all labour materials T&P fitting fixing of AL/WPC. door frame with OEL Anodized Al. Door section of 9202 as vertcal member,9201 as top member and 9200 as bottom and middle member and 12 mm thick pre-laminated board in bottom portion fixed on door frame by meams of tapered clip NO-4660 and the frame by means of jointing angle NO-185 including all cost of labour ,T&P ,hire charges of drilling machine ,labour etc all complete as per the dir of EIC |
| 71 | Supplying all materials labour T&P and fixing porcelain glazed tiles/Marble tiles /Kota /Kodappa tiles in walls / dados skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rub bins and polishing complete as per direction of EIC. |
| 72 | Ground Floor Wall |
| 73 | Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC. Ground Floor |
| 74 | Door sill- 6 x 0.75 x 0.25 =1.125 sqm |
| 75 | Supplying all materials labour T&P and providing painting two coats with approved cement paint on plastered surface etc. all compt as per specification and direction of EIC. |
| 76 | Supplying all materials labour T&P and cutting holes through brick/stone masonry works including making good the damages in cm (1:4) for taking H.C.I/PVC pipes and fittings etc. all complete as per PH specification and direction of EIC.250mm thick wall |
| 77 | 375mm thick wall |
| 78 | Supplying all materials, labour, T&P and cutting holes through brick/stone masonary works including making good the damages in c.m. (1:4) for taking P.V.C. pipes & fittings etc. all complete as per P.H. specification and direction of E.I.C. |
| 79 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. |
| 80 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C. |
| 81 | Supplying all materials, labour T&P and fixing Wash Down Water Closet(Europeon type W.C. pan) with Integral ‘S’ trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.CE..W.C. with ‘S’ trap plain(Neycer/ Parry ware/ Cerra) |
| 82 | Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Neycer/ Parry ware/ Cerra) |
| 83 | Supplying all materials labour T&P and fitting & fixing UPVC SWR soil waste ventilating pipes and fittings of the following OD conforming to ISI No.13591/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e. w. in excavation in all kinds of soil and refilling of trenches as per direction of EIC 110mm dia UPVC SWR Pipe with rain water piping (.Ashirvad / Supreem / Oriplast / Hariplast)110mm dia UPVC SWR Pipe |
| 84 | 110mm dia U-PVC S. Trap |
| 85 | 110mm dia U-PVC P. Trap |
| 86 | 110mm U-PVC S/J with Door |
| 87 | 110mm U-PVC door bend |
| 88 | 110mm dia U-PVC Plain bend |
| 89 | 110mm U-PVC Plain Tee |
| 90 | 110mm U-PVC Cowl |
| 91 | 125mm dia CP Grating |
| 92 | 75mm dia U-PVC SWR Pipe |
| 93 | 75mm dia U-PVC Plain Tee |
| 94 | 75mm U-PVC Door Bend |
| 95 | 75mm U-PVC Plain Bend |
| 96 | Supplying all materials labour T&P and fixing wash kitchen sink/laboratory sink with CI/MS brackets painted white including holes in walls and making good the damages etc. all complete as per PH sp and dir of EIC610x510x200 mm Stainless Steel kitchen Sink heavy good quality |
| 97 | Supplying all materials labour T&P and fixing wash basins with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc .all compt. As per PH sp. And dir. Of EIC.550x400mm WHB-( Paryware/Nycer/ cerra ) |
| 98 | Pedestral 550x400mm WHB |
| 99 | Supplying all materials labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with cp screws and washers compt. As per PH specification and direction of EIC.Rectangular Plastic Frame Mirror Good quality |
| 100 | Supplying all materials labour T&P and fixing standard size cp towel rail/ring compt. with cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC.CP Towel rail (20x600) heavy Stainless steel with Jaquar make . |
| 101 | CP Towel ring heavy Stainless steel withJaquar make . |
| 102 | Supplying all materials labour T&P and fixing standard size cp soap holder compt. With cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC Stainless steel with heavy good quality |
| 103 | Supplying all materials, labour T&P and fitting and fixing C.P shower with 15mm or 20 mm inlet with C.P shower arm including polishing all complete as per P.H. specification and direction of EIC 15mm dia cp shower (Jaquar make) (Shower+Arm) |
| 104 | Supplying all materials, labour T&P and fitting and fixing Acraylic shelf including polishing all complete as per P.H. specification and direction of EIC. 450mmx125mm size Plate Acraylic Shelf with heavy good quality |
| 105 | Supplying all materials labour T&P and fitting and fixing 10 ltr capacity low level flushing cistern with a pair of cast iron or m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia cp foush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of EIC. 10ltr Capacity Cistern ( Paryware/Nycer/ cerra ) |
| 106 | Supplying all materials labour T&P and constructing gully trap chamber of the following inside size with 8cm thick RCC precast cover slab in cc (1:1.5:3) using 12mm size hg chips foundation concre3te(1:3:6) using 40mm size hg metal on bed and around trap FLY ASH Brick work in cm (1:6) in F&P and inside 12mm thick cp (1:3) finished with a floating coat of neat cement including fixing 100mm size HCI gully trap and grating etc. all complete as per approved drawing specification and dir of EIC.Inside size 250mmx250mm gully trap |
| 107 | Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, FLY ASH Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.Inside size : 760 x 760 x 460mm Inspection Chamber |
| 108 | Supplying all materials labour, T&P and constructing soak way pit of the following sizes with precast RCC rings joined loose gravel backing in the rear of well staining, precast RCC cover slab in c.c. (1:2:4) USING 2mm size hg chips fitted with iron lifting handles including e. w. in open well excavation in all kinds of soil and refilling the cavity around the pit and painting the iron works watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of EIC.0.91m dia x 2.10m deep |
| 109 | Supplying all materials labour T&P and construction soak way pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and FLY ASH Brick work in cm(1:6) for the remaining height at top 12mm thick cp (1:4) inside and outside over masonry brick work gravel packing the rear of well staining RCC cover slab in c.c. (1:1.5:3) using 12mm size hg chips fitted with iron lifting handles including e.w. in open well excavation in all kinds if soil and refilling the cavity around the pit and painting the iron works, watering, curing, conveyance of all materials to work site payment royalty, taxes etc. complete as per approved drawing specification and direction of EIC. 1.20m dia x 2.00m deep soak way pit |
| 110 | Supplying all labour materials T&P and laying of UPVC soil waste pipe of the fo0llowing internal diameter confirming to IS in trenches of the depth upto 1.2mtr including jointing with supply of approved rubber, lubricant by non heat application method on bending with 150mm thick cc (1:3:6) using hg metal of 25mm to 40mm and then making all-round encasing including earth work excavation in all kinds of soil, refilling the trenches watering, curing, conveyance of all materials to site payment of royalty, taxes etc. & testing all complete as per PH sp and dir of EIC.110mm dia with allround encasing |
| 111 | Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C. 20 mm dia C-PVC Pipe( Internal) |
| 112 | 25mm dia PVC Pipe (external) |
| 113 | 32mm dia PVC Pipe (external) |
| 114 | Supplying all Materials labour T&P and fitting and fixing brass/CP Fittings of the following nominal bore with supply of all jointing materials etc. complete as per PH Specification and Direction of EIC. 15mm dia CP pillar cock JAQUAR Make |
| 115 | 20mm dia cp concealed stop cock JAQUAR Make |
| 116 | 15mm dia cp angle stop cock JAQUAR Make |
| 117 | 15mm dia cp bib cock S.B. JAQUAR Make |
| 118 | 15mm dia cp bib cock L.B. Swan neck JAQUAR Make |
| 119 | 15mm dia CP Two way bib Cock JAQUAR Make |
| 120 | Health Fuccet JAQUAR Make |
| 121 | 15mm dia CP flange JAQUAR Make |
| 122 | 15mm dia CP Extension piece JAQUAR Make |
| 123 | 25mm dia Brass Ball Valve |
| 124 | 32mm dia Brass Ball Valve |
| 125 | Supplying all materials labour T&P and fixing water storage sintex tanks including and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting and placing the to the required position, including cost of tank conveyance and taxes of all materials to work site etc. all complete as per PH specification and direction of EIC. |
| 126 | 2000 lit sintex tank (1st Floor) |
| 127 | Supplying all materials labour T&P and construction of masonry staging with providing 1st KB brick work in cm (1:6) of 0.40mtr height in staging and in circular protection wall to support to the tank 12mm thick cement plaster in cm (1:4) over brick work RCC beam of 2.61 x 0.25x0.30 using cc (1:1.5:3) using 12mm chips including centering and shuttering curing, conveyance of all materials to work site etc. all complete as per sp and dir of EIC. |
| 128 | 2000 ltr capacity tank 1st floor |
| 129 | Sinking of 200mm dia tube well through hand boring method. |
| 130 | Supplying all materials labour T&P and setting up boring equipments including erection of suitable staging for installation of required size of tube well dismantling and removing the same after completion of the work including transportation of boring equipments, cleaning and leveling the site excavation of mud pit channels, etc. all comp as per dir of EIC.Setting for depths from 0 mtr to 100 mtr |
| 131 | Supplying all materials labour T&P and transportation of boring pipe, top casing grouting pipe, PVC pipe and fitting pvc well screens, cement bentonite and gdravels etc from sectional store to the site and return of departmental material after use including loading and unloading etc. all complete as per dir of EIC. (Current schedule of rate) |
| 132 | Supplying all materials labour T&P and drilling pilot bore not less than 102 mm dia without casing pipes in all kinds of soil and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments extra sockets etc withdrawing the boring pipes, washing and keeping the bore clear for logging if required all comp as per dir of EIC |
| 133 | Supplying all required labour for logging the bore through departmental logging team (till logging team arrives at the site, the contractor is to keep the bore intact by circulating mud through the mud circulating system) and when the logging team arrives at the site, the contractor will withdraw the boring pipe with cutter etc. and keep the bore suitable for logging and supply required labour to carry out the logging operation. |
| 134 | Supplying all labour Tools and plant and plant and reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing thebore by means of pipe cylinder etc. all complete as per direction of EIC.Reaming from 100mm to 150mm dia, 0mtr to 360mtr |
| 135 | Reaming from 150mm to 200mm dia, 0mtr to 360mtr |
| 136 | Reaming from 200mm to 250mm dia, 0mtr to 360mtr |
| 137 | Supplying all labour, tools and plant and jointing materials and lowering the 3009mm dia top casing pipes into the position and removing the same after use all complete as per direction ofEIC. |
| 138 | Supplying all labour tools and plant and jointing materils and lowering the pvc casing pipes, fittings and well screens in jposition, including fitting and fixing of centraliser cutter plug and washing the bore etc. complete as per the direction of EIC. Lowering 200mm dia pvc casing pipe |
| 139 | Cost of 200mm dia 80Sch PVC Pipe |
| 140 | Cost of 200mm dia PVC Strainer pipe |
| 141 | Plugcutter |
| 142 | Supplying all labour, tools and plant and grouting with cement bentonite slurry for saline sealing in thebore around the 50mm dia pvc casing pipe etc. all complete as per the direction of EIC excluding the cost of cement. |
| 143 | Supplying all labour, tools and plant and packing the bore with washed dgravel (size P-6) around the pipes in good quality excluding cost of gravel etc. all complete as per the direction of EIC. |
| 144 | Labour charges |
| 145 | Supplying all labour tools and plant and grouting with cement slurry for sanitary sealing in the bore around the upper most 3mtr of 125/100mm dia pvc casing pipe properly as per the direction of EIC (excluding the cost of cement) |
| 146 | Labour charges |
| 147 | Supplying all labour, tools and plant and materials for cealing and developing the tube well with compressor continously washed till clean and adequate discharge is obtained from the tube well including supply and use of necessary equipments and labour complete in all respect as per the direction of EIC |
| 148 | Supplying of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 900-1000 ltr/hour and a head of 50-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of E.I.C. |
| 149 | Supplying all labour T&P and fitting and fixing of 1.00HP single phase verticaql submersible pump set with commissioning and testing etc. all complete as per direction of EIC. |
| 150 | Supplying and fitting and fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00HP single phase submersible pump including all cost, conveayance and taxes etc. all complete as per direction of EIC. |
| 151 | Supplying and fitting and fixing of three core flat cable (1.5mm2) of ISI make of reputed company like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of EIC. |
| 152 | Supplying and fitting and fixing jof plastic rope, MS well cover, MS clamp, stainless steel short piece, bend & socket including all cost, conveyance and taxes etc. all complete as per direction of EIC. |
| 153 | Supplying and fitting and fixing of HDPE pipes and pipe fittings with making connection to pump set including all cost, conveyance and taxes etc.all complete as per direction of EIC.32mm dia HDPE Pipe(Internal Pipe) |
| 154 | E.I WORKS |
| 155 | Recessed wiring to Light point/Fan point/Call Bell/Exhaust Fan Point with 1.5 sqmm, FR PVC Insulated single core multistrand copper conductor of ISI marked with 20 mm dia non- metallic PVC flexible conduct with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size,MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor and earth wire incouding all accessories and connection as per direction of engineer in charge (Make of wire = Finolex/L&T/ Anchor/ V-Guard) deducting the cost of 2M Box with cover Plate-1 No.) |
| 156 | (1.1.1-1.24.2) -do- Group A |
| 157 | (1.1.2-1.24.2) -do- Group B |
| 158 | (1.1.3-1.24.2) -do- Group C |
| 159 | S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof. |
| 160 | S/F of Angle holder replacing Ceilling Rose |
| 161 | S/F to 16/18 SWG Modular GI box of following sizes (normal sixe) in recess with suitable size of Modular Base & Cover in front including cutting the wall and making good the same in case of recessed conduit as required. |
| 162 | .do 4 Module |
| 163 | .do 6 Module |
| 164 | .do 8 Module |
| 165 | .do 12 Module |
| 166 | S/F of 5/6 Modular Switch & 3pin 5/6A Modular Socket on existing board (1.25.1+1.25.4) |
| 167 | S/F of 15/16A FT power plug and Socket Modular type Accessories(1.27) |
| 168 | S/F of 6M GI box on surface or in recess with suitable size of Modular base cover cover in front including providing and fixing of 2 nos 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch,connection,painting etc. as required (1.26) |
| 169 | S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 32A DP Modular Switch with neon Indicator & 5 pin 15/16 amp. piano type Modular Socket & Mini DP MCB, connection, painting etc as required for AC |
| 170 | S/F of 1 no of 5 pin 15/16 amp. Modular Socket , 1 no of 15/16A Modular switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection |
| 171 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover. |
| 172 | Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) |
| 173 | 2x1.5+1x1.5 (1.8.1) |
| 174 | 2x2.5+1x1.5 (1.8.2) |
| 175 | 2x4+1x1.5 (1.8.3) |
| 176 | 4x6+2x2.5(1:8:10) |
| 177 | Inverter wiring (1x2.5smm) Copper wire (1.19.11a) |
| 178 | S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) |
| 179 | S/F of 'B/C/D' series DP MCB of 63amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the 2 Way double door MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)+(2.3.1b) |
| 180 | Supply and fixing of following size MCB box with sheet steel enclosure, distribution board, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland /plate, interconnection, phosphate and powder painted including earthing etc. as required ( But without MCB/ RCCB/ ISOLATOR)Make-Legrand/L&T/Greatwhite/C&S |
| 181 | S/F of 6 way (6+18) TPN MCB DB double door (2.5.6) |
| 182 | Supply & laying 8 SWG Cu wire in recess for loop earthing as required (3.18) |
| 183 | S/F of G.I.Earth Plate Earthing 600 mm x600mmx6mm with Salt & Charcoal for Earth electrode (3:4)+(3.6) |
| 184 | Supply and fixing of 300mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12\\" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delus R/Orient-Power Flow DBB// Pollycab -Fresh on DBB ) |
| 185 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 186 | S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL/ Havells/PAC/Crompton/Polycab) |
| 187 | Supply and fixing of 1200mm A.C. Ceiling fan (1 star) with all accessories and connections with out fan regulator (Make:Usha-Striker neo HS/Crompton- Highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White - Aldous/ Pollycab - Vital HS ) |
| 188 | S/F step type modular fan regulator |
| 189 | S/F of 15w Watt LED Bulb |
| 190 | S/F of 1.5T 3Star split type AC Machine, Make-Carrier/Bluestar/Hitachi |
| 191 | S/F of 4KVA Automatic Voltage Stabilizer(90-300V), Make-Microtech/V-Guard |
| 192 | S/F of 2000 VA/24V Inverter with 2 nos. 180Ah battery including trolley arrangement (Make: V-Guard/ Microtake/ Luminous |
| 193 | Supply & fixing of 100 A TPN Panel board 1. 100A MCCB (Make- Legrand/Seimens/L&T/C&S/) & bus bar2. 63 A TPN MCB (Make- Legrand/Seimens/L&T/C&S/)- 2nos 3. 32A DP MCB (Make- Legrand/Seimens/L&T/C&S/)- 5 nos 4.40KA TPN SPD-1 no 5. 100 A 4P Manual changeover (Make- Legrand/Seimens/L&T/C&S/)- 1nos6. Digital Volt meter & Ameter three phase 7. All accesories & Connection (Rating & Danger borad) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender