Tender For Advertized Rate List /Bill Of Qunatity For Construction Of Control Room Building /Boundary Wall And Other Allied Works For Newly Sanctioned 10 Mv Receiving Station At Zaloora.....................Advertized Cost Rs. 145.56 Lacs
Tender Value
1.45 Crore
Estimated cost
Bid Submission
15 Oct 2026
18 days left
EMD
2.91 Lakhs
Bank guarantee accepted
Document Fee
2600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Advertized Rate List /Bill Of Qunatity For Construction Of Control Room Building /Boundary Wall And Other Allied Works For Newly Sanctioned 10 Mv Receiving Station At Zaloora.....................Advertized Cost Rs. 145.56 Lacs
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in all kinds of soil by Manual/mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by site Engineer incld.cutting of trees, removal of tree stumps and dewatering of trenches during execution of work. |
| 2 | Supply and filling of stone soling in foundation trenches tightly hand packed with hand ramming, dressing ,watering incld. carriage of material from source to site of work complete |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) including all carriages. |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incld carriage. |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:2:4 (1Cement: 2 coarse sand: 4 grade stone aggregate 20mm nominal size) including all carriages. |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns incld carriage. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. including all carriages. |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for columns , pillars etc.and access platforms. including all carriages. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platforms. including all carriages. |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels, Thermo-Mechanically Treated bars of grade Fe-500D or more, including all carriages. |
| 12 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in Cement mortar 1:6 ( 1 cement : 6 coarse sand) insuperstructure above plinth level upto floor five level incld all carriages complete. |
| 13 | 12mm Cement plaster of mix in 1 : 6 ( 1 cement : 6 coarse sand) including all carriages. |
| 14 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) |
| 15 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete, Size of tile 600x600 mm, including all carriages. |
| 16 | Providing and applying plaster of paris putty of 2mmthickness over plastered surface to prepare the surfaceeven and smooth complete including all carriages |
| 17 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications.Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm incld carriage. |
| 18 | Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) |
| 19 | Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). |
| 20 | Providing Glass Panes 4 mm thick windows/Crestory windows (Area of opening for glass Panes excluding portion inside shall be measured) includin nails, beading with carriage. |
| 21 | Dry random rubble masonry with hard stone in foundation and plinth. With bond stone incld carriage. |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture with carriage.incuding priming coats. |
| 23 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) with carraige. |
| 24 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, including all carriages. |
| 25 | Providing and fixing of High Rib coloured G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 with carriage. |
| 26 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m |
| 27 | Providing and laying concealed/recessed rigid PVC conduit of suitable size for electrical wiring, including providing and fixing fan junction boxes, deep junction boxes, inspection boxes, bend, tees, couplers, saddles, bushes, draw boxes and all other required accessories, complete with cutting chases, making openings, fixing in position, tying with reinforcement wherever required, making good the damaged surfaces with cement mortar, testing for free drawing of wires, carriage of materials, labour, tools and tackles, and all incidental charges, complete as per approved drawings and as directed by the Engineer-in-Charge |
| 28 | Providing and fixing 16 mm , 0.225 m long half-thread truss bolts conforming to relevant IS specifications, complete with hexagonal nut, plain washers on both sides and spring washer, including drilling holes wherever required, inserting and fixing the bolts in position, aligning, tightening to the required torque, and completing the work with all materials, labour, tools and tackles, scaffolding, carriage, wastage, and all incidental charges complete, as directed by the Engineer-in-Charge. |
| 29 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge.Internal work-exposed on wall with clamps at 1.00 meter spacing. PN-16 pipe , 20mm OD(SDR-7.4) including carriage. |
| 30 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge.Internal work-exposed on wall with clamps at 1.00 meter spacing. PN-16 pipe, 16mm OD(SDR-7.4) including carriage. |
| 31 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge.Internal work-exposed on wall with clamps at 1.00 meter spacing. PN-16 pipe , 25mm OD(SDR-7.4) OD(SDR-7.4) including carriage. |
| 32 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms including carriage.. |
| 33 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank with carriage. |
| 34 | Providing and fixing of following PVC Pipes/Fittings like Bends ,collars etc of Approved Brand ( Prince/Phinolex or equivalent B-type) incld trenching and refilling all complete. 100 mm dia Pipe. |
| 35 | Providing and fixing of following PVC Pipes/Fittings like Bends ,collars etc of Approved Brand ( Prince/Phinolex or equivalent B-type) incld trenching and refilling all complete. 75 mm dia Pipe. |
| 36 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 37 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (Area of slab over 0.5 sqm).16 mm thick including carriage. |
| 38 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 610x460mm bowl depth 200mm includin carriage. |
| 39 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms with carriage. |
| 40 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms with carriage.. |
| 41 | Providing and fixing 100 mm dia floor trap of approved make and quality,water seal, necessary fittings and accessories, including cutting and making good the floor wherever required, jointing with the waste pipe using approved materials, testing for leak-proof performance, carriage of materials, labour, tools and tackles, and all incidental charges, complete as per approved drawings and as directed by the Engineer-in-Charge with carriage. |
| 42 | Providing and fixing 100 mm diameter cast iron grating for gully trap, of approved make and quality, including all necessary fixtures, cutting and fitting wherever required, complete with carriage of materials, labour, tools and tackles, and all incidental charges, complete as per the approved drawings and as directed by the Engineer-in-Charge. |
| 43 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone With common burnt clay (non modular) bricks of class designation 7.5 includin carriage. |
| 44 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 20 mm nominal bore including carriage. |
| 45 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) .20 mm nominal bore including all carriages. |
| 46 | Poviding and fixing of approved quality water heater (Geyzer) (Venus / Racold) abs body type brand, including standard quality fixtures and fittings etc; cost and carriage complete 50 ltr Capacity. |
| 47 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer with carriage. |
| 48 | Providing and fixing of 40X5mm flat iron hold fast 40 cm long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embeddings in cement concrete block 30X10X15 cm 1:3:6 mix ( 1 Cement : 3 Coarse sand :6 graded stone aggregate 20 mm nominal size) including all carriages. |
| 49 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 including all fittings and fixtures complete. |
| 50 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets ofthe same materials with snap fittings of approved quality and colour, weighing not less than 105 gms with all carriages complete. |
| 51 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Rectangular shape 453x357 mm including carriage. |
| 52 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms with carriage. |
| 53 | Providing and fixing approved make, ISI marked standard quality hardware fittings for doors, windows and ventilators, such as hinges, tower bolts, sliding bolts, aldrops, handles, mortice locks, hasp and staple, door stoppers, door closers, hooks, eyelets, screws and other necessary accessories, complete with all fixtures and fastenings, including fitting, fixing, alignment, carriage of materials, labour, tools and tackles, and all incidental charges, complete as per approved drawings, specifications and as directed by the Engineer-in-Charge.T.Bolt 100. |
| 54 | Providing and fixing approved make, ISI marked standard quality hardware fittings for doors, windows and ventilators, such as hinges, tower bolts, sliding bolts, aldrops, handles, mortice locks, hasp and staple, door stoppers, door closers, hooks, eyelets, screws and other necessary accessories, complete with all fixtures and fastenings, including fitting, fixing, alignment, carriage of materials, labour, tools and tackles, and all incidental charges, complete as per approved drawings, specifications and as directed by the Engineer-in-Charge.T.Bolt 150. |
| 55 | Providing and fixing approved make, ISI marked standard quality hardware fittings for doors, windows and ventilators, such as hinges, tower bolts, sliding bolts, aldrops, handles, mortice locks, hasp and staple, door stoppers, door closers, hooks, eyelets, screws and other necessary accessories, complete with all fixtures and fastenings, including fitting, fixing, alignment, carriage of materials, labour, tools and tackles, and all incidental charges, complete as per approved drawings, specifications and as directed by the Engineer-in-Charge.Handles 125 mm. |
| 56 | Providing and fixing approved make, ISI marked standard quality hardware fittings for doors, windows and ventilators, such as hinges, tower bolts, sliding bolts, aldrops, handles, mortice locks, hasp and staple, door stoppers, door closers, hooks, eyelets, screws and other necessary accessories, complete with all fixtures and fastenings, including fitting, fixing, alignment, carriage of materials, labour, tools and tackles, and all incidental charges, complete as per approved drawings, specifications and as directed by the Engineer-in-Charge.Handles 150 mm. |
| 57 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete with carraige. |
| 58 | Providing and fixing approved make, ISI marked standard quality hardware fittings for doors, windows and ventilators, such as hinges, tower bolts, sliding bolts, aldrops, handles, mortice locks, hasp and staple, door stoppers, door closers, hooks, eyelets, screws and other necessary accessories, complete with all fixtures and fastenings, including fitting, fixing, alignment, carriage of materials, labour, tools and tackles, and all incidental charges, complete as per approved drawings, specifications and as directed by the Engineer-in-Charge.Almunium Window Hooks. |
| 59 | Supply ,stacking, filling,laying and spreading of Nallah Muck in Floors incld sorting ,spreading to templete ,watering ,dresssing ,ramming and consolidation incld. all carriages complete |
| 60 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete including all carriages. |
| 61 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work |
| 62 | Carriage of Material By Mechanical Transport Avg Lead 25 Km.Stone Aggregrate Below 40 mm and Sand Quantity. |
| 63 | Carriage of Material By Mechanical Transport Avg Lead 40 Km.Bricks |
| 64 | Levelling :Earth work in Bulk excavation in all kinds of soil by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by site Engineer incld.cutting of trees, removal of tree stumps and dewatering of trenches during execution of work. |
| 65 | Fencing:Earth work in excavation in all kinds of soil by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by site Engineer incld.cutting of trees, removal of tree stumps and dewatering of trenches during execution of work. |
| 66 | Supply and filling of stone soling in foundation trenches tightly hand packed with hand ramming, dressing ,watering incld. carriage of material from source to site of work complete |
| 67 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) including all carriages. |
| 68 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering all work upto plinth level in 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 20mm nominal size) including curing complete including all carriages. |
| 69 | Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc . For mass concrete including all carriages. |
| 70 | Structural steel work in builtup section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, including all carriages. |
| 71 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, including all carriages. |
| 72 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in charge. Made of G.I. wire of dia 4 mm |
| 73 | Finishng with Epoxy paint two or more coats at all locations prepared and applied as per manufacture. |
| 74 | Finishing walls with waterproof cement paint two or more coats. |
| 75 | Construction of Paths:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 76 | Earth work in excavation in all kinds of soil by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by site Engineer incld.cutting of trees, removal of tree stumps and dewatering of trenches during execution of work. |
| 77 | Supply and filling of stone soling in foundation trenches tightly hand packed with hand ramming, dressing ,watering incld. carriage of material from source to site of work complete |
| 78 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) including all carriages. |
| 79 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:2:4 (1Cement: 2 coarse sand: 4 grade stone aggregate 20mm nominal size) including all carriages. |
| 80 | Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc including all carriages. |
| 81 | Providing and laying factory made 60mm thick chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-30 grade with approved colour, design & pattern including carraige. |
| 82 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in- charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 83 | Developmnet of internal Roads :Supply and filling of Nallah muck at site in uniform thickness ,hand picking ,rolling with 3 wheeled road /vibratory roller 8-10 tonne capacity in stages to proper grade and camber ,applying and brooming requisite type of screening /binding material to fill up interstices of course aggregrate ,watering and campacting to the required density incld all carriages from approved source to site of work complete job. |
| 84 | Supply and stacking at site Graded Crushed stone aggregrate of size 63mm -45 mm and stone screening of size 13.2 mm nominal size (type A), stone dust/moorum incld laying ,spreading and compacting stone aggregrate of specified sizes to WBM specifiacations in uniform thickness (75 mm ) ,hand picking ,rolling with 3 wheeled road /vibratory roller 8-10 tonne capacity in stages to proper grade and camber ,applying and brooming requisite type of screening /binding material to fill up interstices of course aggregrate ,watering and campacting to the required density incld all carriages from approved source to site of work complete job(crushed from Broken Quarry). |
| 85 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 86 | Electrification:: Point wiring &Accessories :Wiring for light point / exhaust fan point with (P+N) 3X1.5 sq.mm FRLS-H PVC insulated copper conductor single core cable in surface / recessed Conduits , with 6Amp .Modular switch, Modular plate, cover in front and suitable GI box of approved quality and make ISO/IEC/BIS Certified (quality of wire shall be approved before execution of wok by SITE In-charge Engineer strictly as required) job including cost of Circuit Wire in 2.5Sqmm Multi strand Copper wire from Switch board to D.B complete. excluding cost of Conduits(wire shall be approved before execution of wok by SITE In-charge Engineer strictly incld carriage. |
| 87 | Supplying and fixing of Two module Stepped type Electronic Fan Regulator on the existing Modular Plate etc as required ISO/IEC certified of Havells /Legrand/Anchor/Schneider/ABB/Eq Make & Shall be approved before execution of work by SDO. |
| 88 | Wiring for Power Plug with (P+N+E) 3 x 4 sq.mm FRLS-H PV C Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit along with 1 x 4 sq.mm FRLS PVC Insulated copper conductor single core cable for loop Earthing of approved quality and ISI marked as required. With . 1NO. 16Amp .Modular switch, Modular 1NO.3-PIN . 16 Amp. Socket , Modular plate, cover and suitable GI box etc as required (wire shall be approved before execution of wok by SITE In-charge Engineer strictly as required) complete excluding cost of Conduits incld carriage. |
| 89 | Supply and fixing of Suitable size GI Box with Modular Plate and cover in front on surface or in recess including providing and fixing of 6 Pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular Switch ,connections etc as required ISO/IEC certified /Legrand/Anchor Roma plus/Scheider/ABB/Eq Make & Shall be approved before execution of of work by SDO. |
| 90 | Wiring for 6 Amp Plug ( Computer Point) with (P+N+E) 3x2.5 sq.mm FRLS -H PVC insulated Multi standed copper conduit Single Core cable in surface /Recessed conduit (Havells/Anchor/Eq.Make) including all carriages. |
| 91 | Supply and fixing of Suitable Size GI box with modular plate and cover in front on surface or in recess including providing and fixing 2 nos.3 pin 5/6 A modular socket poutlet and 2 nos.5/6 A Modular Switch ,connection etc as required (For Lighting Plugs to be used in non residentail buildings),ISO/IEC certified Hevells /Legrand /Anchor roma Plus/schneider/ABB/Eq.Make & shall be approved before executon of work. |
| 92 | Wiring for Sub main Wiring along with earth Wire with the following Sizes of FRLS PVC insulated copper conductor, single core Cable in surface/ Recessed medium class PVC conduit as required. [including . Conduites] .(wire shall be approved before execution of wok by SITE In-charge Engineer strictly incld carriage.2x2.5 Sq.mm+1x2.5 sq.mm (P+N+E) for circuit wire. |
| 93 | Supply and fixing of Testing and Commissioning of 6 Amp to 32 Amp Rating,240,*C* curve 10 k, Miniature circuit Breaker suitable for inductive load of following poles in existing MCB.DB complete with connection.(L&T /Siemens /Legrand/Havells/ABB/Eq Makr including all carriages. |
| 94 | 40Amp. Legrand /Havells or L&T /Schneider/ABB/ Siemens |
| 95 | 63Amp. Legrand /Havells or L&T /Schneider/ABB/ Siemens |
| 96 | 100Amp. DP MCB with metal enclosure. |
| 97 | Supply and fixing of MCB way 8 -way (4+24) ,horizontal typed sheet steel,double Door Distribution Board,TPN 240 V /415 V on surface recess complete with tinned copper bus bar,neutral bus bar ,earth bar ,Din bar ,interconnection,powder painted including earthing erc as required (L& /Siemens/Legrand/Schneider/ABB/Eq make) including all carriages. |
| 98 | Supply installation testing and commissioning of 18 W + LED Surface Mounted Panel light luminary fitting round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India authorised lab . The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips or Havel's or Wipro or Jaguar orBajaj or H.G LUKEER make [Various Locations ] incld carriage. |
| 99 | Providing and fixing of 1k08 IP-66 Protected High Power LED 50 Watt Flood Light system with single piece Pressure diecast Almunium housing, toughened glass diffuser with suitable lenses on LED to achieve various beams angles of High Power LED 3 to 5 watt each intergrated potted driver as a unique BIS R number having effiency more than 85% and in compliance to BIS certified and trade mark certificate. The System Level Luminaire efficiency >=15 Im/wt.LED driver input voltage AC 120 to 270 V AC With High voltage cutt off @>=3000 V AC and Auto resulting safety.Power Factor >0.95,THD(l) <10%,driver current <=750 ma,driver should be phase to phas protection of 440 v for 4 Hrs. Electrical Connector,Surge Protection Minin.>=4kv internal and 10 Kv external but inside driver compartment .System life of 50000 Burning hours with 70% of initial Lumens maintained,CRI>70 and CCT 5700 K,355 k.Manufactirers word Mark /Name Engraved/Embossing /screen Printing on die cast housing to allow traceability/authenticity.Fixtures Shall be IS 10322 complianced.OEM must haave its own in house NABAL lab setup for all testing facilities for LED fixtures (LM79/LM80) certificte /report with liable Warrenty of product / accessories from OEM shall be submitted.All as per pre approved by site Engineer.For additional technical parameters of product /work ,refer BSR -High Power LED Flood Light Minimium Lumen output 6200 IM of Havells /crompton /Philips Make as approved and to be installed on outside block including S/F of suitable size of Gyser bolt.The Job further includes replacement warrenty of fixtures (if damaged/burnt out what so ever reason) for a period of two years reckoned from date of successfull commissioning /handling over of site to intending Depertment. |
| 100 | Supply/ installation testing and commissioning of 10 W + LED mirror light , bed lght of Havels/VIPRO/HELONICS/PHILIPHS MAKE as dulyfitted on walls incl. making of neccessary connections. |
| 101 | Supply ,Installation,Testing and Commissioning of Decorative 1200 mm Sweep Ceiling Fan with 3 No.Almunium Blades ,30 Cm long down rod, 2 nos.Canopies,Shackle kit, Power factor not less than 0.9, service value including safety Pin,nut bolts,washers ,temperature rise =75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz and including Iron Hook complete.USHA striker /Havells Oyster metalic /Crompton Aura/Equivalent make as directed by Site Engineer. |
| 102 | Supply/Laying/Connecting and Commissioning of 35 sq.mm 3.5-Core XLPE/PVC insulated and steel armored 1.1 KV grade Aluminium Cable of Havells/Polycab/Eq. Make with required size of thimbles duly crimped with hydraulic crimping tool including Providing/Fixing of saddles/clips with making of connection and partially to be laid underground through DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refilling the Trench. (Material to be approved before execution) |
| 103 | Supply/Installation/Testing & Commissioning of 5MP IR Dome PTZ with 37X or above Optical Zoom and 300 Mtr or above IR Distance. 1/2.8” CMOS Sensor. 5MP, 0Lux with IR LED on. 37x or above Optical Zoom, 16x Digital Zoom. IR LEDs with IR Distance of 300m or above, MTBF >100,000 hours. Video Analytics: Tripwire, Perimeter Object Abandon, Loitering, etc. H.265/H.264/M-JPEG, ONVIF S, G, T Compliance. PoE Support, NAS Storage, SD Card Support (512GB), Quad Stream Support, 1/1 Audio I/O, 2/2 Alarm I/O. STQC ER Compliant & Cyber Secured as per ISO / IEC 27402. NDAA Compliant, BIS, CE, FCC, RoHS, IK10 on Metal housing, IP67, NEMA 4X CP Make. |
| 104 | Supply/Installation/Testing & Commissioning of 5MP IR Dome Camera Fixed 2.8mm Lens with IR Range of up to 50 meters. 1/2.8” - CMOS Sensor. 5MP, 0Lux with IR LED on, 2.8 mm. IR Range of up to 50 meters. Video Analytics: Trip Wire, Intrusion Detection and Motion Detection. H.265/H.264/M-JPEG Video Compression. PoE Support, NAS Storage, SD Card Support (512GB), Quad Stream Support, 1/1 Audio I/O, 1/1 Alarm I/O. True WDR, 3D Noise Reduction, Adaptive Streaming, Smart Streaming and ROI, SNR > 70 dB. STQC ER Compliant & Cyber Secured as per ISO / IEC 27402, NDAA Compliant, BIS, CE, FCC, RoHS, IK10, IP67, UL, NEMA 4X Matrix/Equivalent Make & Shall be approved not less than SDO.CP Plus /Eq.make. |
| 105 | Commissioning of 5MP IR Bullet Camera Fixed 4.0mm Lens with IR Range of up to 50 meters. 1/2.8” CMOS Sensor, 5MP, 0Lux with IR LED on, 4.0 mm. IR Range of up to 50 meters. Video Analytics: Trip Wire, Intrusion Detection and Motion Detection. H.265/H.264/M-JPEG Video Compression. PoE Support, NAS Storage, SD Card Support (512GB), Quad Stream Support, 1/1 Audio I/O, 1/1 Alarm I/O. True WDR, 3D Noise Reduction, Adaptive Streaming, Smart Streaming and ROI, SNR > 70 dB. STQC ER Compliant & Cyber Secured as per ISO/IEC 27402, NDAA Compliant, BIS, CE, FCC, RoHS, IK10, IP67, UL, NEMA 4X of CP Plus Make. |
| 106 | SITC OF 24 INCH LED Monitor Amsung/Dell/LG/Eq.make |
| 107 | SITC of 16-Channel Network Video Recorder (NVR), H.265+, HDMI/VGA output, network ports, complete job CP Plus/Honey-Well/Eq. make. |
| 108 | SITC of 4 TB Surveillance Hard Disk compatible with NVR Western Digital (WD Purple)/Seagate (Sky-hawk)/Eq. make. |
| 109 | SITC of 8-Port Gigabit PoE Switch (minimum 120 W PoE budget) CP Plus/D-Link/Eq. make |
| 110 | SITC of Cat 6 UTP Cable D-Link/Molex/Eq. make. |
| 111 | Supply of RJ45 Cat 6 Connectors D-Link/Molex/Eq. make. |
| 112 | Supply and fixing of Waterproof Camera Jaunction Boxes CP Plus /Hikvision/Eq. make. |
| 113 | Supply and laying of PVC Conduit /Casing -Capping with acessories Anchor /Ravinder/Eq Make. |
| 114 | Supply of 2 m Car 6 Patch Crd D-Link /Molex /Eq Make. |
| 115 | SITC of 6 U Wall-Mounted Network Reck with PDU,fan and acessories D-Link/Molex/Eq Make. |
| 116 | Suppl/Laying/testing & Commissioning of Armounted 6 core Fber -Outer Diameter (mm):7.2 +-0.5, thickness of Jacket (mm): 1.8+-,Normal cab le weight (Kg/m) HDPE/LSZ:55/70,pulling Tension IEC 6079-1-2-E1:1000,Crush load IEC 60794-1_2-E3:2000,Bend Radius(mm) IEC 60794-1-2-E11IEC 60794-1-2-Ee6:200 of Finolex Make. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender