Tender For Construction Of Control Room Building For 3X1 Mva Receiving Station For Assocaited Hospital Of Gmc Handwara Including Allied Civil Works.
Tender Value
30.71 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
0 days left
EMD
61420
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Control Room Building For 3X1 Mva Receiving Station For Assocaited Hospital Of Gmc Handwara Including Allied Civil Works.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Oct-2026 | Corrigendum | Technical Bid | 19-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Earthwork in excavation over areas exceeding 30 cm in depth, 1.5 m in width and 10 sqm on plan, including disposal of excavated earth, lift up to 1.5 m, in all kinds of soil, by mechanical means, complete. |
| 3 | Providing and laying stone soling to required thickness and level, including dressing, packing and consolidation, complete. |
| 4 | Providing and laying PCC 1:4:8 (1 cement : 4 coarse sand : 8 graded crushed stone aggregate 40 mm nominal size), excluding centering and shuttering, all work up to plinth level, complete. |
| 5 | Providing and laying RCC M20 grade concrete, excluding cost of centering, shuttering, finishing and reinforcement, all work up to plinth level, complete. |
| 6 | Providing and laying PCC M15 grade concrete in 1:2:4 mix (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 40 mm nominal size), excluding centering and shuttering, all work up to plinth level, complete. |
| 7 | Providing and laying RCC 1:1½:3 (1 cement : 1½ coarse sand : 3 graded crushed stone aggregate 20 mm nominal size) in beams, suspended floors, roofs, landings, balconies, shelves, chajjas, lintels, bands, window sills and staircases up to five levels, including curing but excluding centering, shuttering, finishing and reinforcement, complete. |
| 8 | Providing, cutting, bending, placing and binding reinforcement steel for RCC work, including straightening and all necessary operations, using TMT bars, complete. |
| 9 | Providing, erecting and removing centering and shuttering, including strutting, propping, supports and removal of formwork, for bases of footings and mass concrete, complete. |
| 10 | Providing, erecting and removing centering and shuttering, including strutting and propping, for walls of any thickness, plinths, buttresses and pilasters, complete. |
| 11 | Providing, erecting and removing centering and shuttering for lintels, suspended floors, columns and similar RCC works, complete. |
| 12 | Providing, erecting and removing centering and shuttering to edges of slabs, including supports and necessary arrangements, complete. |
| 13 | Brickwork in foundation and plinth with FPS Class-A bricks in cement mortar 1:6 (1 cement : 6 coarse sand), including curing and complete in all respects. |
| 14 | Extra for brickwork above plinth level, over the basic rate of brickwork, complete. |
| 15 | Providing and fixing first-class Kail wood frames for doors, windows, clerestory windows and other openings, properly wrought, framed and fixed in position, complete. |
| 16 | Providing and fixing glazed shutters for doors, windows and clerestory windows, 30 mm thick, using first-class Kail wood and 4 mm thick glass panes, including M.S. butt hinges, screws and all necessary fittings, complete. |
| 17 | Providing and fixing panelled/panelled and glazed shutters, 25–40 mm thick, using first-class Kail wood, including panelling, glazing where applicable, M.S. butt hinges, screws and all necessary fittings, complete. |
| 18 | Providing and fixing wire-gauze shutters, 40 mm thick, using first-class Kail wood and galvanized M.S. wire gauze of 0.63 mm dia wire with approximately 1.4 mm aperture, including M.S. butt hinges, screws and necessary fittings, complete. |
| 19 | Providing and laying vitrified floor tiles, 600 × 600 mm, conforming to IS 15622, water absorption below 0.08%, of approved make, colour and shade, laid over 20 mm thick cement mortar 1:4, including joint grouting with white cement and matching pigment, complete. |
| 20 | 12 mm thick cement plaster in cement mortar 1:6 (1 cement : 6 fine sand) on rough side of single or half-brick walls, including curing and finishing, complete. |
| 21 | Providing and applying 2 mm thick Plaster of Paris (POP) putty over plastered surfaces to prepare an even and smooth finish, complete. |
| 22 | Providing and laying cement concrete flooring, 50 mm thick, in 1:2:4 mix with 20 mm nominal size crushed stone aggregate, including cement slurry and floating coat of neat cement, excluding nosing of steps, complete. |
| 23 | Wall painting with acrylic emulsion paint of approved make and shade, including one coat of primer and two or more coats of paint on new work, to achieve an even finish, complete. |
| 24 | Providing and fixing 40 × 5 mm flat iron holdfasts, 40 cm long, including fixing to frames with 10 mm dia bolts, nuts and wooden plugs and embedding in 30 × 10 × 15 cm cement concrete blocks in 1:3:6 mix, complete. |
| 25 | Providing and fixing 25 mm dia PPR composite pressure pipes, conforming to IS 15450, UV-stabilized, including all required composite fittings such as elbows, tees, reducers, couplers and connectors, testing of joints, concealed installation with clamps at 1.0 m spacing, cutting of chases and making good the wall, complete. |
| 26 | Providing and fixing 32 mm dia PPR composite pressure pipes, conforming to IS 15450, UV-stabilized, including all required composite fittings, testing, concealed installation with clamps at 1.0 m spacing, cutting of chases and making good the wall, complete. |
| 27 | Providing and placing polyethylene water storage tank, IS 12701 marked, on terrace at all floor levels, including cover, locking arrangement and necessary inlet, outlet and overflow holes, excluding fittings and base support, complete. |
| 28 | Providing and fixing 15 mm dia pipe specials, of reputed approved make such as RESP/Jaquar/Parco/Nike or equivalent, ISI marked, including carriage up to site and all necessary fittings, complete. |
| 29 | Providing and fixing sink mixer of approved make and quality, including all necessary accessories and connections, complete. |
| 30 | Structural steel work in built-up sections, trusses and framed structures, including cutting, hoisting, fixing in position and application of one coat of approved steel primer, including welded connections, complete. |
| 31 | Providing and fixing pre-coated galvanized iron profile sheets, 0.50 mm (+0.05%) total coated thickness, zinc coating 120 g/sqm conforming to IS 277, 240 MPa steel grade, epoxy primer 5–7 microns on both sides and polyester top coat 15–18 microns, with protective guard film of 25 microns, fixed with self-drilling/self-tapping screws 5.5 × 55 mm with EPDM seals, including cutting to required size and shape, complete; excluding purlins, rafters and trusses. should be supplied in single length upto 12 metre or as desired by Engineer-in-charge |
| 32 | Providing and fixing coloured GI eave boarding, 300 mm wide and 0.50 mm thick, including J/L hooks or 8 mm dia nuts and bolts and all necessary accessories, complete. |
| 33 | Providing and fixing pre-coated GI sheets for ridges, hips and valleys, 0.50 mm thick and 600 mm wide, fixed with polymer-coated J/L hooks, 8 mm dia bolts and nuts, bitumen and GI limpet washers, complete. |
| 34 | Providing and fixing stainless steel hardware fittings for doors and windows, including handles, tower bolts, stays, hinges, aldrops, locks and other necessary fittings of reputed make, complete. |
| 35 | Providing and fixing GI chain-link fabric fencing, 50 × 50 mm mesh, using 4 mm dia GI wire, including strengthening with 2 mm dia wire and necessary nuts, bolts and washers, complete as directed by Engineer-in-Charge. |
| 36 | Supplying and fixing angle iron posts and struts of required sizes, including splitting and bending at bottom in opposite directions for 100 mm length, drilling holes up to 10 mm dia and all necessary works, using 65 × 65 × 6 mm, 50 × 50 × 6 mm and 50 × 6 mm sections, complete. |
| 37 | Providing and fixing modular wardrobes made of 19 mm thick plywood of required sizes and configuration, including Sunmica finish, fittings, fixtures and finishing, complete. |
| 38 | Providing and fixing polished granite stone wall lining, 18 mm thick, over 12 mm thick cement mortar 1:3 bed, including cement slurry @ 3.3 kg/sqm, pointing with white cement, curing and all necessary works, complete. |
| 39 | Providing edge moulding to 18/16 mm thick marble stone counters and vanities, including machine polishing of edges to achieve high-gloss finish, as per approved design, complete. |
| 40 | Filling with available excavated earth, excluding rock, in trenches, plinths and sides of foundations, in layers not exceeding 20 cm, including ramming, watering, consolidation, lead up to 50 m and lift up to 1.5 m, complete. |
| 41 | Providing and fixing concealed electrical wiring of standard gauge in HDPE conduits with standard make fittings/accessories, including 5 lighting points, 3 heating points, 1 exhaust fan point and all necessary materials and accessories, using approved makes such as Polycab/Philips/Havells/Bajaj/Legrand/Anchor or equivalent, complete. |
| 42 | Carriage of all materials required for construction from source to site of work by mechanical transport, including loading, unloading, handling and stacking, complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 19, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender