Tender For Maintenance Of Street Lights, High Masts, Subways, Underdeck & Fob Lights On Delhi Pwd Roads Under Pwd Emd South West. (Sh : Shifting Of 30 Mtr. High Mast At Dhaula Kuan).
Tender Value
10.81 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
1 days left
EMD
21623
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Street Lights, High Masts, Subways, Underdeck & Fob Lights On Delhi Pwd Roads Under Pwd Emd South West. (Sh : Shifting Of 30 Mtr. High Mast At Dhaula Kuan).
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of existing 30 mtr height of High Mast pole with Fittings From existing foundation i/c cutting of foundation bolts etc. and making good smooth surface & Re-erection of High mast on new foundation with LED light fittings by suitable means i/c testing, commissioning etc. as required. |
| 2 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required |
| 3 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 4 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. |
| 5 | Upto 35 sq. mm |
| 6 | Supplying & fixing PVC insulated PVC sheathed copper conductor flat cable ISI Marked in existing metal/ HDPE / PVC/ pipe including fixing the cable to GI/HDPE pipe with suitable cable tags of following sizes etc. as required. |
| 7 | 8 Core 2.5 Sq mm Flat Cable |
| 8 | Installation of LED Flood light fittings on the existing upto 30 Mtr High Mast lantern carriage by suitable means i/c making connection with suitable size copper connecting wire and fixing with thimble / ferrul and testing, commissioning etc complete as required. |
| 9 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 10 | All kinds of soil |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of cantering and shuttering - All work up to plinth level : |
| 12 | \\"1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 14 | Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 15 | Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.a) In gratings, frames, guard bar, ladder, railings, brackets,gates and similar works. |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for.a) Foundations, footings, bases of columns, etc. for mass concrete |
| 17 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required. |
| 18 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 19 | Fabrication, Supplying and fixing of wiremesh frame work made out of 40 mmx40mm x5mm thick Angle iron having 40x6mm flat strip & wiremesh 6 swg dia m.s wire with 25 mm x 75 mm space in between mesh & top covered for rain protection by 16 SWG MS Sheet and making main door gate having suitable locking arrangement with 2 Nos. locks (Frame size shall not be more than 60 cm x 90 cm) i/c grouting with cement concrete & painting with synthetic enamel paint of approved colour quality after applying the red oxide primer etc complete as reqd. |
| 20 | Replacement of old unserviceable of the following accessories on the existing high mast suitable for fixing luminaires complete with winch assembly, SS wire rope with U clamp of both the ends and window cover of 30 Mtr pole i/c connections, testing, commissioning etc. i/c complete with greasing the pinions, making required holes to fix the same etc. as reqd. |
| 21 | Gear Box |
| 22 | SS Wire Rope 8 mm |
| 23 | Supply, installation, testing & commissioning of Outdoor type Feeder Pillar panel suitable for 415 V, 3 phase ,4 wire 50 Hz AC supply system fabricated in compartmentalized & segregated design from CRCA sheet steel of 2 mm thick for frame work and 1.6 mm for covers, with 3 mm gland plates i/c cleaning & finishing complete with powder coating in approved shade, Having 4 strip aluminium bus bar of 250 Amp capacity double door with locking arrangement for protection from rain, dust, final fixed on M.S. Angle iron frame work of size 50 mm x 50 mmx 6 mm and 90 cm long legs out of which 40 cm duly grounded in cement concrete, entire panel shall have a common aluminum earth bar of size 25 mm x5mm at the rear with 2 Nos. earth stud, solid connection form main bus bar to switch gear with required size of Alu. bus bar & control wiring with 1.5 sqmm. PVC insulated copper conductor S/C cable, cable alleys, cable gland plates, duly grouted in cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Stone aggrete 20 mm) and having following accessories mounted inside the cubical panel board i/c making connection, interconnection with aluminium thimbless & duly painted with one coat of red oxide & two coats of superior quality enamel paint complete etc. as required. (The panel should by fabricated from CPRI approved manufacturer) (For 9 Nos. Feeder Piller Panel) |
| 24 | Providing & Fixing of following electrical accessories/switches etc in the above existing panel board including making connection testing, commissioning etc. complete as reqd. |
| 25 | 125 A, 16 KA, TPMCCB (Ics=Icu=100%) Incoming |
| 26 | 100 A, 16 kA, TPMCCB (Ics=Icu=100%) Outgoing |
| 27 | Digital Volt Meter (0-500) with selector switch |
| 28 | Digital Ammeter (0-300) with selector switch |
| 29 | CT (250/5) |
| 30 | LED Indicator Lamp |
| 31 | Digital Timer |
| 32 | Power contactor 110 A (ML-6 or Similar) |
| 33 | Danger Plate |
| 34 | Cutting of hard rock/road/ PCC/Paver Block for laying of UG cable for Street light pole to pole with the help of hilty/ hammer etc. i/c making good by laying in position cement concrete 1:2:4: (1 Cement :2 coars sand : 4 graded stone ) of size 0.2 B x 0.2 D mtr etc. as required. |
| 35 | Providing Boring (trenchless digging) in Soft Soil and Laying HDPE pipes (ISI Marked) of 120 mm O.D. confirming to IS- 4984-1995 as amended upto date with pressure rating of 4 kg/sq.c.m by trench less technology with no dig method by making bore hole in horizontal direction across the road as per direction of Engineer- in- charge with mounting equipment i/c jointing cleaning, roadding of pipe. providing suitable covers on mouth of pipes, excavation of pits of required size at a depth of 1.30 mtrs. to 2.00 mtrs. |
| 36 | Buy back of old dismantle material |
| 37 | Winch Assembly |
| 38 | SS Wire Rope 8 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender