Tender For Height Raising Of 2 (Two) Nos. Of Towers Of 132Kv S/C Nathkuchi-Barnagar Line At Loc 193-194 Due To Low Sag
Tender Value
45.32 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
18 days left
EMD
91000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nalbari → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Height Raising Of 2 (Two) Nos. Of Towers Of 132Kv S/C Nathkuchi-Barnagar Line At Loc 193-194 Due To Low Sag
BOQ
| Sl. No. | Item Description |
| 1 | Supply of Lattice type Galvanised steel angle tower with stubs and cleats, different types of G.I. HT Nuts & Bolts ,Washer,Spring Washer for the Towers ,hanger and all accessories,Tower Super Structure complete including step bolts. Supply of Bituminious paint for three coats upto height of 500mm above the coping (Legs & bracing members). All supply should confirm to the techinical specification. |
| 2 | Super structure (DB+3) at loc. 193 |
| 3 | Super structure (DA+0) at loc. 194 |
| 4 | Tower accessories |
| 5 | Supply of Danger plate |
| 6 | Supply of Phase plate (set of three) |
| 7 | Supply of Number plate |
| 8 | Supply of Bird Guard (Set of three) |
| 9 | Supply of Anti-Climbing device |
| 10 | 37/3.15 mm ACSR Panther conductor |
| 11 | Conductor Accessories |
| 12 | Single tension Hardware fittings (Dead end type) including all accessories suitable for ACSR panther |
| 13 | Single Suspension Hardware fittings including all aceessories suitable for ACSR Panther |
| 14 | Performed armoured Rods |
| 15 | Supply of Lattice type Galvanised steel angle tower with stubs and cleats, different types of G.I. HT Nuts & Bolts ,Washer,Spring Washer for the Towers ,hanger and all accessories,Tower Super Structure complete including step bolts. Supply of Bituminious paint for three coats upto height of 500mm above the coping (Legs & bracing members). All supply should confirm to the techinical specification. |
| 16 | Super structure (DB+3) at loc. 193 |
| 17 | Super structure (DA+0) at loc. 194 |
| 18 | Tower accessories |
| 19 | Supply of Danger plate |
| 20 | Supply of Phase plate (set of three) |
| 21 | Supply of Number plate |
| 22 | Supply of Bird Guard (Set of three) |
| 23 | Supply of Anti-Climbing device |
| 24 | 37/3.15 mm ACSR Panther conductor |
| 25 | Conductor Accessories |
| 26 | Single tension Hardware fittings (Dead end type) including all aceessories suitable for ACSR panther |
| 27 | Single Suspension Hardware fittings including all aceessories suitable for ACSR Panther |
| 28 | Performed armoured Rods |
| 29 | Dismantling of complete towers at loc. 193 & 194 and transport the same to Rangia Store |
| 30 | At 193 (DA+0) , weight:2.8MT |
| 31 | At 194 (DA+0) , weight:2.8 MT |
| 32 | Erection of new super structure at loc. 193 & 194 |
| 33 | At loc. 193 (DB+3), weight: 5.2 MT |
| 34 | At loc. 194 (DA+0), weight: 4.4 MT |
| 35 | Offline OPGW works including jointing and splicing as per instruction of site engineer and bid specification |
| 36 | Earthing per tower including supply of all earthing materials (per tower) |
| 37 | Painting of tower with bituminous paints of approved quality to 3 mts from ground level including the cost of the paint (per tower) |
| 38 | Welding of Nuts & Bolts per tower |
| 39 | Detail survey using GPS for total work and prop setting for new towers |
| 40 | ERS (2 Nos. of ERS shall be used) |
| 41 | ERS Tower materials sorting, Loading for 2(two) no of ERS and allied accessories from Kahilipara store and unloading at nearest motorable spot of Site Camp. (Weight- 5.2 MT per ERS)For 02 Nos. of ERS Tower-5.2 x 2= 10.4 MTTotal distance- 125 Kms |
| 42 | Carrying of ERS materials from site camp to worksite by head loading. |
| 43 | Preparation and leveling of of ERS installation site |
| 44 | Sorting and loading of ERS and T&P material |
| 45 | Anchoring including Excavation for 5 nos. of Anchors |
| 46 | Installation/Erection of ERS Tower |
| 47 | Stringing of conductors (three nos.) in ERS tower including changing of damaged insulators, jointing and repairing of the conductors |
| 48 | Opening, repairing and refitting of jumpers |
| 49 | Dismantling of conductors (Three Nos.) from ERS |
| 50 | Dismantling of ERS Tower including de-anchoring |
| 51 | Carrying of ERS matrials from worksite to site camp by headloading |
| 52 | Dismantling of conductors (3 Nos.) from the existing line |
| 53 | Restringing of three nos. of conductors for adjustment of sag ( with support of roller ) per km/per conductor |
| 54 | ERS Tower materials sorting, Loading for 2(two) no of ERS and allied accessories from site camp and unloading at Kahilipara store. (Weight- 5.2 MT per ERS)For 02 Nos. of ERS Tower-5.2 x 2= 10.4 MTTotal distance- 125 Kms |
| 55 | Civil works loc no. 193 |
| 56 | Detail & check survey as per specification |
| 57 | Mobilization (including preparation of work space, Approach road, dewatering, arrangement of electricity, jungle clearing, earth filling and making all arrangement for completion of the work) and construction and supply of all materials & labours of temporary island/platform to faciallitate the construction of foundation including platform for storage of construction materials such as stone chips, sand, cement, steel reinforcement bar, mixture machines, tools & plants all foundation materials keeping & mixing. |
| 58 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 59 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) PCC |
| 60 | Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.Brick soling. |
| 61 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 62 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources) |
| 63 | Centering and shuttering including strutting, propping etc. and removal of form forColumns, Pillars, Piers, Abutments, Posts and Struts |
| 64 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) |
| 65 | Setting of stubs (sets of four) including transportation & distribution of stub and accessories from store to site excluding the cost of excavation, concreting & back filling. |
| 66 | Civil works loc no. 194 |
| 67 | Detail & check survey as per specification |
| 68 | Mobilization (including preparation of work space, Approach road, dewatering, arrangement of electricity, jungle clearing, earth filling and making all arrangement for completion of the work) and construction and supply of all materials & labours of temporary island/platform to faciallitate the construction of foundation including platform for storage of construction materials such as stone chips, sand, cement, steel reinforcement bar, mixture machines, tools & plants all foundation materials keeping & mixing. |
| 69 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 70 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) PCC |
| 71 | Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.Brick soling. |
| 72 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 73 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources) |
| 74 | Centering and shuttering including strutting, propping etc. and removal of form forColumns, Pillars, Piers, Abutments, Posts and Struts |
| 75 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) |
| 76 | Setting of stubs (sets of four) including transportation & distribution of stub and accessories from store to site excluding the cost of excavation, concreting & back filling. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender