Tender For special Repair To Bldg No P-45 And Ancillary Services For 963 Int And Fs Unit Under Ge Stm Chennai.
Tender Value
48.50 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
12 days left
EMD
97000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No P-45 And Ancillary Services For 963 Int And Fs Unit Under Ge Stm Chennai.
BOQ
| Sl. No. | Item Description |
| 1 | B/R PORTIONDismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 2 | M & L for non-skid coloured ceramic tiles 7mm to 8mm thick (square /rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, in floors etc., set jointed in neat grey cement slurry @ 3 Kg/Sqm and pointed in white or coloured cement to match, laid over and including 20mm thick screed bed in CM (1:4), complete all as specified and as directed. |
| 3 | S & F first quality glazed designer pattern coloured ceramic tiles of size 450mm x 300mm x7mm /450 x 350 x7mm / 350 x 250 x7mm thick fixed in pattern to wall (combination of dark & light colour with border) as in skirting, dado, set and jointed in neat cement slurry, over and including 10 mm thick rendering of cement mortar (1:3), including pointing in white cement with pigment to match the shade of tiles, complete all as specified and as directed. |
| 4 | S & F for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 Sqm, in floors etc., laid over and including 20mm thick screed bedding in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed. |
| 5 | S & F for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 Sqm, in skirting, laid over and including 10mm thick rendering in cement mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed. |
| 6 | M & L for granite (of any type) tiles 20mm thick machine cut, bedded in 20mm thick (1:4) cement mortar screed bedding and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed. |
| 7 | M & L for 20mm thick Granite (of any type) tiles machine cut, in skirting /dado, laid over cement screed 10mm thick in CM (1:4) and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed. |
| 8 | S & F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed. |
| 9 | M & L for exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid, 6mm thickness (Frame work for ceiling shall be measured and paid separately), as per specification and drawing complete all as specified and directed. |
| 10 | S & F factory made uPVC white colour three track three panels sliding window/ ventilator with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 Sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 Kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engr-in-Charge. (Glass or wiremesh shall be paid separately as supply only).Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 11 | Taking up or down steel tubing and connections, size 25 mm dia bore, including cleaning for re-fixing or removal to stores, complete all as specified and directed. |
| 12 | Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors, including all plain fittings and pipe cutting, fixing with CPVC solvent cement and testing, complete all as specified and as directed. |
| 13 | S & F brass 'male threaded adaptor (MTA/MBTA)' suitable for 25mm outer dia CPVC pipe, complete all as specified and directed. |
| 14 | S & F brass 'female threaded adaptor(FTA/FBTA)' suitable for 25mm outer dia CPVC pipe, complete all as specified and directed. |
| 15 | S & F brass 'union' suitable for 25 mm outer dia CPVC pipe, complete all as specified and directed. |
| 16 | Taking up or down steel tubing and connections, size 20mm dia bore, including cleaning for re-fixing or removal to stores, complete all as specified and directed. |
| 17 | Cutting chases, pinning in brick walls, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed. |
| 18 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors, including all plain fittings and pipe cutting, fixing with CPVC solvent cement and testing, complete all as specified and as directed. |
| 19 | S & F brass 'elbow' suitable for 20mm outer dia CPVC pipe, complete all as specified and directed. |
| 20 | S & F brass 'Tees' suitable for 20mm outer dia CPVC pipe, complete all as specified and directed. |
| 21 | S & F brass 'male threaded adaptor (MTA/MBTA)' suitable for 20mm outer dia CPVC pipe, complete all as specified and directed. |
| 22 | S & F brass 'female threaded adaptor (FTA/FBTA)' suitable for 20mm outer dia CPVC pipe, complete all as specified and directed. |
| 23 | S & F brass 'union' suitable for 20mm outer dia CPVC pipe, complete all as specified and directed. |
| 24 | Demolition of reinforcement cement concrete any description or in any position not otherwise specifically provided for portion ordered to be demolished to facilitate to welding to reinforcements to existing reinforcements, complete all as specified and as directed. |
| 25 | S & F for rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, conforming to Fe-410- W (Gde-E-250) quality-B, complete all as specified and directed. |
| 26 | S & F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws all as specified and as directed. |
| 27 | Taking down chowkat with shutters whitout taking off shutter from frame exc 1.5 Sqm but n.exc 4.00 Sqm each complete all as specified and directed. |
| 28 | S & F for powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (sliding/ fixed portions) with extruded built up standard tubular sections / appropriate Z approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws including all accessories, complete as per architectural drawings and the directions of Engr-in-Charge. |
| 29 | S & F for powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engr-in-Charge |
| 30 | M & L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and as directed. |
| 31 | S & F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk /wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite /borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 32 | S & F for factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite /borer proof, water /moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engr-in-Charge. (Note: Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 33 | M & L for RCC (nominal mix), type B-1 (1:2:4) ( using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 34 | M & L for use and waste of timber as in form work (rough finished surfaces of concrete) to flat surfaces of soffits and sides of suspended shelves and similar work etc; complete all as specified and directed. |
| 35 | Cutting holes of superficial area n. exc 150 Sqcm into or through brick walls built in cement mortar, complete all as specified and as directed. |
| 36 | M & L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and as directed. |
| 37 | Demolition of bricks wok built in cement mortar, compete all as specified and as directed. |
| 38 | M & L for brickwork with fly ash bricks (old size bricks) in cement mortar (1:6), straight or curved on plan exc 6 m mean radius, complete all as specified and as directed. |
| 39 | S & F in repairs vitreous chinaware wash down water closet squatting pan (Orissa pattern /Indian type) of size 580mm x 440mm, white, with integral foot rests (excluding flushing cistern and flush pipe but including CI ‘P’/’S’ trap), set and jointed including embedding concrete, and taking down old one, complete all as specified and directed. |
| 40 | S & F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete including , P/S' traps, complete all as specified and directed. |
| 41 | S & F in repairs plastic water closer seat, white, closed pattern with flat bottom, and cover and chromium plated or aluminised hinging device, complete all as specified and directed. |
| 42 | S & F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, complete all as specified and directed. |
| 43 | S & F in repairs wash basins, vitreous china (flat back or angle back type) size 550 x 400mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe including waste coupling, complete all as specified and directed. |
| 44 | S & F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including waste pipe and waste coupling, complete all as specified and directed. |
| 45 | Taking down PVC rainwater pipes /waste water pipes (any size or pattern or description), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed. |
| 46 | S & F for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 47 | S & F for 100mm bore pipe stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed. |
| 48 | S & F for 100mm dia bore cast iron soil (spun pipes), waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed. |
| 49 | S & F for 100mm dia bore cast iron soil (spun pipes), waste and vent pipes in any length with or without ears, with cement joints, fixed on walls, complete all as specified and directed. |
| 50 | S & F for 75mm dia bore cast iron soil (spun pipes), waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed. |
| 51 | S & F for 75mm dia bore cast iron soil (spun pipes), waste and vent pipes in any length with or without ears, with cement joints, fixed on walls, complete all as specified and directed. |
| 52 | S & F 100mm dia bore cast iron floor traps ‘P’ or ‘S’), complete including including embbeding in cement concrete, complete all as specified and directed. |
| 53 | S & F 75mm dia bore cast iron floor traps ‘P’ or ‘S’), complete including including embbeding in cement concrete, complete all as specified and directed. |
| 54 | S & F 100mm dia bore cast iron branch pieces with oval access, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and directed. |
| 55 | S & F 75mm dia bore cast iron branch pieces with oval access, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and directed. |
| 56 | S & F 100mm dia bore cast iron bends diminishing pieces with oval access or tapers (larger bore measured), complete all as specified and directed. |
| 57 | S & F 75mm dia bore cast iron bends diminishing pieces with oval access or tapers (larger bore measured), complete all as specified and directed. |
| 58 | S & F 100mm dia bore cast iron cowls, complete all as specified and directed. |
| 59 | S & F 75mm dia bore cast iron cowls, complete all as specified and directed. |
| 60 | M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed |
| 61 | S & F in repairs for 15mm bore dia stop valves /angle stop valve, cast copper alloy, chromium plated fancy type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions , complete all as specified and directed. |
| 62 | S & F in repairs for 15mm dia bore pipe stop valves, cast copper alloy, chromium plated with long shank and cup (concealed type) fancy type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions , complete all as specified and directed. |
| 63 | S & F in repair pillar taps, cast copper alloy chromium plated fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed. |
| 64 | S & F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 65 | S & F in repairs tubular towel rail, 20mm dia, D type, 60cm long between flanges including screws for fixing, complete all as specified and directed. |
| 66 | S & F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 67 | S & F in repairs bib taps suitable for 15 mm dia bore pipe, cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 68 | S & F for brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and as directed. |
| 69 | S & F in repairs brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and as directed. |
| 70 | S & F PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and as directed. |
| 71 | S & F for grating doom 100mm dia of PTMT (minimum weight 25gms, complete all as specified and directed. |
| 72 | Supply only for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 73 | Supply only for 4.8 mm thick sheet galss selected quality exc 0.50sqm each fixing to UPVC window with glazing beads, complete all as specified and directed. |
| 74 | Supply only for 4.8 mm thick sheet galss ordinary quality obscured or frosted on one side n.exc 0.50sqm each to UPVC window with glazing beads, complete all as specified and directed. |
| 75 | S & F for 150mm size aluminium handles, cast type, anodised, complete all as specified and directed. |
| 76 | S & F for 150mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 77 | S & F for 140mm size floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and directed. |
| 78 | M & L for cutting holes in brick walls (exc half brick but n.exc one brick thick) in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, complete all as specified and directed. |
| 79 | S & F for preparation of new steel surfaces any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 80 | M & L for 9mm thick veneered decorative ply wood, grade I (with BWR resin) decorative veneers on both faces as in kitchen cabinet shutters, partitions, etc, complete all as specified and directed. |
| 81 | M & L for 18mm thick veneered decorative ply wood, grade I (with BWR resin) decorative veneers on both faces as in kitchen cabinet shutters, partitions, etc, complete all as specified and directed. |
| 82 | S & F for second class hardwood plain fillets (sectional area n.exc 3 Sqcm) square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and as directed. |
| 83 | S & F continuous (piano) hinges of 20mm width of flaps (when open), mild steel, bright finish or electrogalvanised complete all as specified and as directed. |
| 84 | S & F for magnetic catcher 40mm x 15 mm in size (weight 20gms) suitable for kitchen cabinet/ cupboard shutter, complete all as specified and directed. |
| 85 | M & L for preparation of untreated wooden surfaces of any description, not otherwise described, n.exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 86 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 87 | M & L for 40 mm thick plain cement concrete (1:2:4) type B-1, (using 20mm graded stone aggregate), complete all as specified and directed. |
| 88 | S & F for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed. |
| 89 | S & F for 100mm in size butt hinges, extruded brass, with mild steel hinge pin, bright, complete all as specified and directed. |
| 90 | Taking down chowkat with frame n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed. |
| 91 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 92 | S & F for steel rolling shutters, with out ball bearing, as specified including top cover, anchoring, rod, spring suitable forr rolling shutter, hasp and staple and one shop coat of primer gear operated type with bevel gear box and crank handle; erected in position as indicated, complete all as specified and as directed. |
| 93 | M & L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (whereever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed. |
| 94 | S & F for anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design /pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engr-in-Charge. |
| 95 | S & F in repairs for harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc, complete all as specified and directed. |
| 96 | Dismantling of existing roof treatment of any description completely and brushing the cleaned surfaces of concrete with neat cement slurry @ 3Kgs of cement per Sqm removing all the debris from site and rubbish off the premises complete all as specified and as directed. |
| 97 | M & L for PCC (1:2:4) type B-0 (using 12.50 mm graded stone aggregate) over the roof slab 25mm thick, finished even and fair without using extra cement all as specied and directed. |
| 98 | M & L for 10mm thick cement plaster in CM (1:3), mixed with water proofing compound over the levelling course while the concrete is green, finished even and smooth without using extra cement all as directed.Note : WPC shall be measured and paid separately. |
| 99 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 100 | M & L for APP modified prefabricated three layer water proofing membrane, not less than 3 mm thick and weighing not less than 3.00 Kg/Sqm reinforced with non woven polyester matt black finished over compatible, laid over a tack coat of blown bitumen 85/25 grade @ 1.20 Kg/Sqm with torching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface, complete all as per manufactures instructions and finally finished. The overlap joint shall be provided of 75mm in longitudinal direction and 100mm in transverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage including preparatory work complete all as specified and as directed.Note: The work shall be carried out by authorized applicators of manufacturer. |
| 101 | M & L for preparation of old decorated plastered/ unplastered wall surfaces and applying two coats of two coats of oil bond distemper white or tinted, complete all as specified and directed. |
| 102 | M & L for preparation of old decorated plastered/ unplastered ceiling surfaces and applying two coats of two coats of oil bond distemper white or tinted, complete all as specified and directed. |
| 103 | M & L for preparation of old decorated plastered/ unplastered ceiling surfaces and applying two coats of two white wash, complete all as specified and directed. |
| 104 | M & L for complete removal to existing treatment including preparation and fnishing walls with premium acrylic smooth exterior paint with silicone additives of required shade, New work (Two or more coats applied @ 1.43 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm), complete all as specified and directed by Engr-in-Charge. |
| 105 | Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.., to store and rubbish not exc. 50m, complete all as specified and directed. |
| 106 | Forming jambs in cement mortar (1:4), etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and as directed. |
| 107 | Making good under cills or over arches, lintels and bressummers., including all pinning in cement mortar (1:4), complete all as specified and directed. |
| 108 | Taking down cement plaster in any discription and any position, including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed. |
| 109 | M & L for 15mm thick rendering on fair faces of brick or concrete in cement mortar (1:6) and finishing the surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 110 | M & L for 15mm thick rendering on fair faces of brick or concrete in cement mortar (1:4) and finishing the surfaces even and fair, complete all as specified and directed. |
| 111 | M & L for 10mm thick rendering fair faces of brick or concrete surfaces of ceiling in cement mortar (1:3) and finishing the surfaces even and fair, complete all as specified and directed. |
| 112 | M & L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of priming plastered and other surfaces with alkali resistant priming paint, complete all as specified and directed. |
| 113 | M & L for preparation of new plastered surfces of ceiling and applying two coats of oil bound distemper over a coat of chalk whitening primer on walls including preparation of surfaces complete all as specified. complete all as specified and directed. |
| 114 | M & L for preparation of new plastered surfces of wall and applying two coats of oil bond distemper over chalk whitening complete all as specified and as directed. |
| 115 | S & F for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and directed. |
| 116 | S & F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing, complete all as specified and directed. |
| 117 | S & F for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 118 | S & F for towel Ring of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (minimum weight 90gms), complete all as specified and directed. |
| 119 | Disconnecting existing tanks exc1000 ltr but n.exc 2000 ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting reconnecting and re-fixing in position. (cleaning repairing, etc. measured separately), complete all as specified and directed. |
| 120 | Disconnecting existing tanks exc 500 ltr but n.exc 1000 ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting reconnecting and re-fixing in position. (cleaning repairing, etc. measured separately), complete all as specified and directed. |
| 121 | S & F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe 25mm dia bore and fixed. (Minimum weight 25mm-455gms) complete all as speciifed and directed. |
| 122 | E/M PORTIONTaking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceilingroses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as directed. |
| 123 | M & L for wiring complete with 1.5 Sqmm single core FRLSH PVC insulated unsheathed cable 1100 volts grade, multistranded with copper conductors conforming to IS specifications, drawn through and including non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories or casing capings incl acceesoires fixed on wall / ceiling or concealed on wall, making good disturbed surfaces of walls and fixed on ceiling etc with suitable clamps, screws, etc or concealed in wall including terminal boxes fabricated with 1.6 mm MS sheet concealed in walls covered with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, fan regulators, etc, including provn of 1.5 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :-(a) One light point controlled by one switch |
| 124 | Description all as per Item No 122.00 here-in-above but:(b) One fan point controlled by one switch complete all as specified and as directed. |
| 125 | Description all as per Item No 122.00 here-in-above but :(c) One Exhaust fan point controlled by one switch complete all as specified and as directed. |
| 126 | Description all as per Item No 122.00 here-in-above but :(d) One 3 pin 5 amps switch socket on same board alongwith other switches complete all as specified and as directed. |
| 127 | Description all as per Item No 122.00 here-in-above but :(e) One 3 pin 5 Amps switch socket on independent board complete all as specified and as directed. |
| 128 | Description all as per Item No 122.00 here-in-above but :(f) One bell point controlled by bell push switch on independent board complete all as specified and as directed. |
| 129 | Description all as per Item No 122.00 here-in-above but wiith 4 Sqmm single core PVC cable for one 3 pin 15 Amps switch socket outlet on independent board complete all as specified and as directed. |
| 130 | Taking down sub main wiring (or) power wiring complete upto 2 runs of 10 Sqmm in PVC conduit removing to stores or taken as credit and making good the disturbed surfaces of wall, etc all as specified and as directed. |
| 131 | M & L for sub main wiring with PVC insulated, 1100 volts grade single core FRLSH multistranded copper conductor cable conforming to IS specifications, 2 runs of 10 Sqmm including one run of 10 Sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories or casing capping incl accessories fixed on wall/ceiling etc, or concealed in wall and connecting to common earth dolly including taking down old unsv one all as specified and directed.Note : (i) 3 Runs of 10 Sqmm cable shall be measured as one unit length. (ii) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. |
| 132 | M & L for sub main wiring with PVC insulated, 1100 volts grade single core FRLSH multistranded copper conductor cable conforming to IS specifications, 2 runs of 6 Sqmm including one run of 6 Sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories incl accessories fixed on wall/ceiling etc., or concealed in wall, making good disturbed surfaces on walls and connecting to common earth dolly all as specified and directed.Note : (i) 3 Runs of 6 Sqmm cable shall be measured as one unit length. (ii) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. |
| 133 | S & F in repairs Ceiling rose surface bakelite 65mm x 50 mm two to three terminals complete all as specified and as directed. |
| 134 | S & F in repairs modular switch flush direct to fit press type 10 Amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed. |
| 135 | S & F in repairs modular switch flush direct to fit press type 16/20 Amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed. |
| 136 | S & F in repairs modular socket flush direct to fit press type 10 Amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed. |
| 137 | S & F in repairs modular socket flush direct to fit press type 16/20 Amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed. |
| 138 | S & F in repairs modular fan step regulator, 120W - 1 module for ceiling fan of 1200 mm sweep all as specified and as directed. |
| 139 | S & F in repairs modular white cover with plate with frame 2 module incl flush box matching with white cement wk if necessary complete all as specified and as directed. |
| 140 | S & F in repairs modular white cover with plate with frame 3 module incl flush box matching with white cement wk if necessary complete all as specified and as directed. |
| 141 | S & F in repairs modular white cover with plate with frame 4 module incl flush box matching with white cement wk if necessary complete all as specified and as directed. |
| 142 | S & F in repairs modular white cover with plate with frame 6 module incl flush box matching with white cement wk if necessary complete all as specified and as directed. |
| 143 | S & F in repairs modular white cover with plate with frame 8 module incl flsh box matching with white cement wk if necessary complete all as specified and as directed. |
| 144 | S & F 30W bldg security light fitting including suitable GI bracket and clamps nuts etc with best in class design and robust heat sink alongwith class leading IP, and surge protections for long lasting performance including taking down old unsv light fitting complete all as specified and as directed. Make : Havells, Cat No: LHETAVU7PA70030/ Bajaj, Cat No BCLST 30W LED/ Crompton Greaves Astra Neo, Cat No: LSTS-30-CDL/NL-M |
| 145 | S & F replacement of modular clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 230 Volts 20/32 Amps all as specified and as directed. |
| 146 | S & F in repairs MCCB Distribution Board, TP &N, vertical, double door, sheet steel, enclosure powder coated with 125 Amps rated busbar with neutral link, 415 Volts 8 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 4 Pole V-Tec MCCB of 125 A rating & 16kA breaking capacity, MCCB pre-fitted at factory all as specified and directed. Make: C&S /Legrand/ ABB |
| 147 | S & F in repairs MCB Distribution Board , 240 volts single pole and neutral , double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 4 ways TPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Make: C&S /Legrand/ ABB |
| 148 | S & F in repairs MCB TP pole 415 volts, 40 to 100 Amps 'C' Curve 10 kA breaking capacity complete all as specified and as directed. Make:Havells /L&T/ Legrand/ ABB |
| 149 | S & F in repairs MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series including taking down old one complete all as specified and directed.Make:Havells /L&T/ Legrand/ ABB |
| 150 | S & F in repairs 40W LED aluminium battens high wattage decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly, energy efficient complete all as specified and as directed. Make : Havells, Cat No: LED Pride plus LHEXACP7IN1J040/Bajaj, Cat No: BPTX 40W LED 4F WH/ Crompton Greaves, Cat No: CCS-100-40-65-HL2-DP-NWH |
| 151 | S & F in repairs 10W LED battens decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy efficient complete all as specified and as directed. Make : Havells, Cat No: LED Pride Plus LHEXACP5IN1W010/ Bajaj, Cat No: BCLSB 10 WH or techno- commercially equivalent as approved by GE. |
| 152 | S & F in repairs of surface mounted 20W led LED luminaires of 1'x1' complete all as specified and as directed. |
| 153 | S & F in repairs 36W LED recess mounted powder coated CRCA housing 2ft x 2ft luminaire providing uniform illumination suitable for all kind of open office applications, lighting fixture with high lumen output, environmental friendly, energy efficient complete all as specified and as directed. |
| 154 | S & F decorative pendant ceiling light brushed nickel finish fixture with opel glass diffuser suitable with 9W LED lamp B22 base complete all as specified and as directed. |
| 155 | Taking down old ceiling fan/ Exhaust fan and kept in MES store complete all as specified and as directed by Engr-in-Charge. |
| 156 | S & F in repairs/ replacement exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 200mm complete all as specified and as directed. |
| 157 | S & F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep 3 Star rating complete all as specified and as directed. |
| 158 | M & L for Earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick burried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron /steel earth wire 4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No 3 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoal dust, PCC (1:2:4) type B-1 in chamber, RCC (1:2:4) chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender