Tender For Periodical Services To Otm Accn In Zone-A Under Age Br-I At Mil Stn Bikaner Under Ge (N) Bikaner.
Tender Value
49 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
10 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services To Otm Accn In Zone-A Under Age Br-I At Mil Stn Bikaner Under Ge (N) Bikaner.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparation of old surfaces plastered or unplastered , brooming down or steel wire brushing etc and applying one coat of white wash on old decorated surfaces of ceiling include cornices complete all as specified and directed. |
| 2 | M&L for preparation of old surfaces plastered or unplastered , brooming down or steel wire brushing etc and applying one coat of oil emulsion distemper/OBD on old decorated surfaces of ceiling include cornices complete all as specified and directed. |
| 3 | M&L for preparation of old surfaces plastered or unplastered , brooming down or steel wire brushing etc and applying one coat of white wash on old decorated surfaces of walls include cornices complete all as specified and directed. |
| 4 | M&L for preparation of old surfaces plastered or unplastered ,brooming down or steel wire brushing etc and applying one coat of oil emulsion distemper/OBD of approved tint on old decorated surfaces of walls include comices by using roller/spray machine and filling depressions/cracks by using wall care putty as desired smoothening of surfaces complete all as specified and directed. |
| 5 | M&L for for complete removal of existing treatment on walls etc, by scraping, sand papering or by using mechanical sander/grinder etc. and preparing surfaces and applying a coat of wall primer and two coat of oil emulsion distemper/OBD of approved tint on walls by using roller/spray machine complete all as specified and directed. |
| 6 | M&L for Preparation of old surfaces plastered or unplastered , brooming down or steel wire brushing etc on walls etc and applying one coat of cement base paint of approved tint on walls by using roller/spray machine complete all as specified and directed. |
| 7 | M&L for for complete removal of existing treatment on walls etc, by scraping, sand papering or by using mechanical sander /grinder etc. and preparing plastered surfaces and applying a coat of wall primer and two coat of exterior acrylic emulsion paint (weather coat ) of approved tint on walls by using roller/spray machine complete all as specified and directed. |
| 8 | M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width & girth & applying one coat of synthetic enamel paint complete all as specified and directed. |
| 9 | M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width and grith and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 10 | Taking down cement plaster includiing raking out joints hacking for key and scrubbing down with water complete all as specified and directed. |
| 11 | M&L rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement including complete all as specified and directed. |
| 12 | M&L rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement ,top 5 mm layer will be done with and including WPC complete all as specified and directed. Note : The rate quoted shall be deemed tobe include for WPC in this item. |
| 13 | M&L for 15mm thick rough cast plaster in cement mortar 1:4 consists of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with 6 to 12 mm depending on the ratio 1:1:1 complete all as specified and directed. Note : The rate quoted shall be deemed to include for necessary use and waste opf form work if required and nothing extra shall be paid on this account. |
| 14 | M&L rendering 5 mm thick in CM 1:3 on concrete surfaces on ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 15 | S&F sheet glass 3 mm thick ordinary quality & glazing with oil putty in any shape n. exc 0.5 Sqm in each pane including hacking out old broken glass from metal frame of any thickness incl punching or drilling out old glazing pin/springs clips and providing and fixing new ones, complete all as specified and directed. |
| 16 | S&F sheet glass 3 mm thick Obscrured or frosted quality & glazing with oil putty in any shape n. exc 0.5 Sqm in each pane including hacking out old broken glass from metal frame of any thickness incl punching or drilling out old glazing pin/springs clips and providing and fixing new ones, complete all as specified and directed. |
| 17 | M&L for preparation of new plastered/putty surfaces , brooming down or steel wire brushing etc applying two coat of exterior acrylic emulsion paint (weather coat ) of approved tint on walls over a coat of wall primer by using roller/spray machine over new surfaces etc all as specified and directed by Engineer-in-Charge. |
| 18 | M&L for preparation of new plastered/putty surfaces by brooming down or steel wire brushing scraping down oil & greasy spots etc and applying two coats oil emulsion distemper/OBD paint of approved tint over a coat of wall primer by using roller/spray machine over new surfaces etc all as specified and directed by Engineer-in-Charge. |
| 19 | M&L for preparation of new plastered/putty surfaces by brooming down or steel wire brushing scraping down oil & greasy spots etc and applying one coat of primer and applying three coats white wash on ceiling of approved tint complete all as specified and directed. |
| 20 | M&L for preparation of new plastered / putty surfaces by brooming down or steel wire brushing scraping down oil & greasy spots etc and applying one coat of primer and applying two coats oil emulsion distemper/OBD on ceiling of approved tint over new surfaces by using roller/spray machine etc complete all as specified and directed. |
| 21 | M&L for writing letters or figures (Block Roman, Itaic or Indian) not exc 30cm high complete all as specified and as directed . |
| 22 | M&L for applying Smartcare Damp proof / Damp sheath coating of approved brand at damped area as manufacturer's instructions before applying putty/primer/paint complete all as specified and directed . |
| 23 | M&L for applying 3mm thick on wall care putty on new or old surfaces of wall/RCC surface/Soffits of chajjas/roof projections/centilevers/balcony etc. as required for desired smoothness and levelling of surfaces including sand papaering after filling the putty to make surface smooth and ready for receiving primer/ painting complete all as specified and directed. |
| 24 | M&L for applying 3mm thick on Ceiling care putty on new or old surfaces including sand papaering after filling the putty to make surface smooth and ready for receiving primer/ painting complete all as specified and directed. |
| 25 | Removing up rooting vegetation growth building roof top / sides of walls exc 30cm girth incl and stacking or serviceable material and disposal of unserveaceable material to distance n exc 50cm and clearing site and making food of the disturbed surfaces in brick work cm 1:4 and plaster in 1:4 surface area nexc 0.5 sqm complete all as specified and as directed. (Note : For Removal of vegetation if reqd at site rain water pipes bends to be removed preserved and refixed in the same location) |
| 26 | M&L for rendering 15mm thick readymade plaster on outer walls with UltraTech READIPLAST by adding 17-19% of potable water by weight of material for thickness above 15 mm it is recommended to be applied in multiple layers. Ready-mix plaster shall complies with IS 1661-1972, IS 2250-1965, IS 2402-1963 and confirms the compressive strength @ 28 Days- 10-12 Mpa/ Bulk density- 1500-1600 Kg/m3 complete all as specified and directed. Note :The rate quoted by contractor shall include cleaning of surface, application as per instruction all as specified and directed) |
| 27 | M&L for applying exterior wall painting system with two coat of high-performance Aliphatic/Acrylic Polyurethane (PU) liquid paint over one coat of Exterior-grade high-performance water-based or solvent-based exterior primer (acrylic/epoxy-modified sealer) over plastered exterior surfaces to achieve a weather-resistant, UV-stable, and glossy/semi-gloss finish, including all scaffolding, new surface preparation complete all as specified and directed. |
| 28 | M&L for applying luxury interior wall painting system on old/previously painted surfaces using high-end, low-VOC, water-based luxury acrylic emulsion paint. Work includes thorough scraping of existing loose paint, scrubbing, cleaning, filling minor cracks and dents, applying one (1) coat of interior wall primer (sealer) over patched/repaired areas, and applying two (2) uniform coats of luxury emulsion paint to achieve a smooth, rich sheen/matte finish, complete all as specified and directed. |
| 29 | M&L for applying Easy clean luxury interior painting system on old/previously painted ceiling surfaces using high-end, low-VOC, water-based luxury acrylic emulsion ceiling paint. Work includes thorough scraping of existing loose/flaking paint, scrubbing, cleaning, filling minor cracks, undulations, and joint lines with approved filler, applying two (2) coat of interior wall/ceiling primer (sealer) over patched/repaired areas, and applying two (2) uniform coats of finish paint to achieve a smooth, elegant, and even matt/sheen finish, complete all as specified and directed. |
| 30 | M&L for applying luxury interior wall painting system on new plastered wall surfaces using high-end, low-VOC, water-based luxury acrylic emulsion paint. Work includes thorough surface preparation, rubbing down, applying one (1) coat of interior wall primer (sealer), applying 3mm of water-resistant acrylic wall putty to achieve a micro-smooth surface,and applying two (2) uniform coats of luxury emulsion paint to achieve a rich sheen/matte finish, complete all as specified and directed. |
| 31 | M&L for applying luxury interior painting system on new plastered/concrete ceiling surfaces using high-end, low-VOC, water-based luxury acrylic emulsion or flat-matt ceiling paint. Work includes thorough surface preparation, rubbing down, applying one (1) coat of interior wall/ceiling primer (sealer) on bare plaster, applying 3mm of water-resistant acrylic wall putty to achieve a smooth overhead surface and applying two (2) uniform coats of finish paint to achieve a seamless, uniform overhead appearance, complete all as specified and directed. |
| 32 | M&L for applying Easy clean acrylic interior emulsion paint on new plastered wall surfaces to achieve a smooth and even matt/soft-sheen finish. Work includes surface preparation (scrubbing/cleaning), application of one (1) coat of interior wall primer (sealer), application 3 mm thick acrylic wall putty to achieve a smooth surface and application of two (2) uniform coats of acrylic interior emulsion paint, complete all as specified and directed. |
| 33 | M&L for applying acrylic interior emulsion paint on old/previously painted wall surfaces to achieve a smooth and even matt/soft-sheen finish. Work includes thorough scraping of existing loose, flaking, or blistered paint, scrubbing and cleaning the surface, filling minor cracks and dents with approved wall putty and applying two (2) uniform coats of standard acrylic interior emulsion paint, complete all as specified and directed. |
| 34 | M&L for applying acrylic interior emulsion paint on old/previously painted ceiling surfaces to achieve a smooth and uniform matte finish. Work includes thorough scraping of existing loose, flaking, or blistered paint, scrubbing and cleaning the overhead surface, filling minor cracks, joint lines, and undulations with approved wall putty and applying two (2) uniform coats of standard acrylic interior emulsion paint, complete all as specified and directed. |
| 35 | M&L for applying acrylic interior emulsion paint on new plastered/concrete ceiling surfaces to achieve a smooth and uniform matte finish. Work includes surface preparation, rubbing down, applying one (1) coat of interior wall/ceiling primer (sealer) on bare plaster, applying 3mm of water-resistant acrylic wall putty or gypsum filler to achieve a smooth overhead surface and applying two (2) uniform coats of standard acrylic interior emulsion paint, complete all as specified and directed. |
| 36 | S&F for PVC(SWR)single socketed in any length with rubber ring joint fixed with wall of 110mm as in rain water pipe including dimantling of existing pipes of any size with all fittings complete all as specified and directed. |
| 37 | S&F for PVC(SWR) bends any radius 110mm complete all as specified and directed. |
| 38 | S&F in repair Stack clamp out of 50mm x5mm flat iron stays with 110mm dia PVC Pipe covering including bolt and nuts,spacer and securing ends of stays to walls complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender