Tender For Providing Road Safety Signage Boards And Zebra Crossing Markings At Zone 2 At Karur Corporation Schools .

Sharing tender

Tender for Providing Road Safety Signage Boards And Zebra Crossing Markings At Zone 2 At Karur Corporation Schools . , Road Marking With Hot Applied Thermoplastic Compound With Reflectorising Glass Beads On Bituminous Surface. Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorising Glass Beads @ 250 Gms Per Sqm Area, Thickness Of 2.5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35- 2015. The Finished Surface To Be Level, Uniform And Free From Streaks And Holes Etc., Complete As Per Mort&H Specification No.803 , Road Markers/Road Stud With Lens Reflector Providing And Fixing Reflective Road Studs Of ‘Category A Raised Pavement Markers Made Out Of Poly Carbonate / Methyl Methercrylate/Abs Moulded Body Confirming To Astm D 788 And Reflective Panels With Micro Prismatic Lens Capable Of Providing Total Internal Reflection Of The Light Entering The Lens Face With Retro Reflectance And Chromaticity Values Conforming To Astm D4280. The Reflective Raised Pavement Markers Shall Also Confirm To The Mort&H Circular No Rw / Nh. 33023/10/ 97-Do. Iii Dt 11.06.97. The Height, Width And Length Shall Not Be Less Than 15 Mm, 90 Mm And 100 Mm And With Minimum Reflective Area Of 13 Sq.Cm On Each Side And The Slope To The Base Shall Be 35 (+/-) 5 Degree. Each Reflector Shall Have A Cil Not Less Than Values Specified In Table 2 Of Said Mort&H Circular. The Strength Of Detachment Of The Integrated Cylindrical Shanks, (Of Diameter Not Less Than 19 (+/-) 2Mm And Height Not Less Than 30 (+/-) 2 Mm) From The Body Is To Be A Minimum Value Of 500 Kgf. Fixing Will Be By Drilling Holes On The Road For The Shanks To Go Inside, Without Nails And Using Epoxy Resin Based Adhesive As Per ManufacturerS Recommendation And Complete As Directed By The Engineer. The Marker Shall Support A Load Of 13635 Kg Tested In Accordance With Astm D4280 And Confirming To Irc 35 - 2015 Guidelines And Mort&H Specification 804 Etc., Complete , Providing And Erecting Of Direction And Place Identification Retro-Reflectorised Sign Made Out Of High Intensity Prismatic Grade Sheeting Confirming To Type-Iv Standards Of Irc-67: 2022 And Astm D 4956 F Ixed -09, Specification And Fixed Over 2Mm Thick Aluminium Sheet Over A Back Supporting Frame Of 25Mmx25mmx3mm Mild Steel Angle And Supported On A Mild Steel Angle Post 75X75x6mm With A Clear Height Of Not Less Than 2.10M From The Ground Level To The Bottom Of The Sign Board And 0.60M Below Ground Level. The Sign Post Should Be Painted As Per Irc 67-2022 And Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M15 Grade Cement Concrete 45Cmx45cmx60cm Size Including Cost And Conveyance Of All Materials, Equipment, Machinery And Labour With All Leads And Lifts, Loading Charges Necessary For Satisfactory Completion Of The Work As Directed By The Engineer- In Charge. High Intensity Retro Reflectro Sheet Shall Consist Of Minimum Coefficient Of Retro-Reflection As Per Table 6.6 Of Irc 67-2022. The Retro- Reflective Sheeting Shall Be Covered Under 7 Year Warranty Issued For Field Performance And A Certified Copy Of Three Years Outdoor Exposure Report Shall Be Obtained As Per Irc 67:2022. (As Per Mort&H Specification No.801) Direction And Place Identification Signs - Type-Iv Rate Per Sqm (For Sign Having Area Upto 0.90 Sqm) Type-Iv , Providing And Erecting Of Retro - Reflectorised Cautionary, Mandatory And Informatory Signs (Without Definition Board) Made Out Of High Intensity Prismatic Grade Sheeting Confirming To Type-Iv Standards Of Irc-67: 2022 And Astm D 4956 -09, Specification And F Ixed Over 2Mm Thick Aluminium Sheet Fixed Over A Back Supporting Frame Of 25Mm X 25Mmx3mm Mild Steel Angle And Supported On A Mild Steel Angle Post 75X75x6mm With A Clear Height Of Not Less Than 2.10M From The Ground Level To The Bottom Of The Sign Board And 0.60M Below Ground Level. The Sign Post Should Be Painted As Per Irc 67-2022 And Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M15 Grade Cement Concrete 45Cmx45cmx60cm Size Including Cost And Conveyance Of All Materials, Equipment, Machinery And Labour With All Leads And Lifts, Loading Charges Necessary For Satisfactory Completion Of The Work As Directed By The Engineer-In-Charge. High Intensity Retro - Reflectro Sheet Shall Consist Of Minimum Coefficient Of Retro-Reflection As Per Table 6.6 Of Irc 67-2022. The Retro - Reflective Sheeting Shall Be Covered Under 7 Year Warranty Issued For Field Performance And A Certified Copy Of Three Years Outdoor Exposure Report Shall Be Obtained As Per Irc 67:2022. (As Per Mort&H Specification No.801) , 90 Cm Equilateral Triangle (As Per Sor 2025-26 (Hw-W0070)) , 90 Cm Octagon (As Per Sor 2025-26 (Hw-W0076)) , 60 Cm Circular (As Per Sor 2025-26 (Hw-W0072)) , (As Per Sor 2025-26 Hw-W0074) 60 Cm X 45 Cm Rectangular 110Mm Pvc Tee Wd-M0110