Tender For Special Repair To Bldg No 74 & 76 Of Hq 350 Inf Bde (Old Ilp) And Addn/ Altn Of Qtr No 355/2, Rp Enclave Under Age B/R-Ii Of Ge (East) Jalandhar Cantt (Tender Id No 2026_Mes_789541_1)
Tender Value
24.94 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
10 days left
EMD
49882
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No 74 & 76 Of Hq 350 Inf Bde (Old Ilp) And Addn/ Altn Of Qtr No 355/2, Rp Enclave Under Age B/R-Ii Of Ge (East) Jalandhar Cantt (Tender Id No 2026_Mes_789541_1)
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete of any description and in any position and removing surplus spoil out of defence land where directed at a level not exc 1.5 m above the starting point, complete all as specified and as directed. |
| 2 | M&L for 50mm PCC 1:3:6 type C2 using 40mm graded aggregate as in plinth protection and path finishing the surfaces even and smooth without using extra cement, complete all as specified and as directed. |
| 3 | Demoliation floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 4 | M&L for non skid joint free glazed ceramic coloured tiles of area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm and 6-7 mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes, complete all as specified and as directed. |
| 5 | M&L for non-skid coloured ceramic glazed tile 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes, complete all as specified and as directed. |
| 6 | M&L for 25mm thick cement concrete (1:2:4) type B-1 (12.5 mm graded aggregate) to receive the top layer of tiles complete, complete all as specified and as directed. |
| 7 | Ditto all as per item No 06 above but on skirting etc over and including 10 mm thick cement plaster finished even and rough to receive tiles in Cement mortar (1:4) complete, complete all as specified and as directed. |
| 8 | Roughering surface of old concrete floor or wall by picking, sweeping clean and washing down with water to remove dust including brushing neat cement slurry with 3.00 Kg/Sq mtr of Cement etc, complete all as specified and as directed. |
| 9 | M&L for coloured glazed tiles of size 450x350x7mm thick as in vertical surface i.e. skirting/dado set and jointing in neat cement slury and pointed in white or coloured cement to match the existing surface with & including rendering 10mm thick in cement morter 1:4 finished rough to fix tiles , complete, complete all as specified and as directed. . |
| 10 | Demolition and dismantling of reinforced cement concrete of any description and in postiion not other wise specifically provided for, complete all as specified and as directed. |
| 11 | M&L for MS TMT bars 10 mm dia and over dia and cut to lenth, bent to shape required incl cranking bending spirally for hooping for column hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed. |
| 12 | M&L for RCC (1:2:4) type B-1 using 20mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed. |
| 13 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and as directed. |
| 14 | M&L for 16-18mm thick pre-polished green marble as in cooking plateform over 15mm thick screed bed in CM (1:6) including grinding and mirror polished/granite polished and making hole for LPG pipe and rounding of edge of stone, complete all as specified and as directed. |
| 15 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc and removing surplus spoil out of Defence Land where directed at a level not exc 1.5 m above the starting point, complete all as specified and as directed. |
| 16 | M&L 15 mm thick cement plaster in cement mortar 1:6 on internal surface of brick or concrete surface finished even and smooth without using extra cemen, complete all as specified and as directed. |
| 17 | M&L for preparing new surfaces plastered or unplastered surfaces of walls by applying two coats of oil bound distemper over a coat of primer over a coat of 1 mm avg thickness wall putty, complete all as specified and as directed. |
| 18 | Complete removal of existing treatment and preparation of old plastered surfaces of walls and applying two coat of distemper oil emulsion over a coat of primer over 1mm avg thickness wall putty complete, complete all as specified and as directed. |
| 19 | M&L for 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even, complete all as specified and as directed. (WPC shall be measured and paid separately under appropriate item of this BOQ). |
| 20 | Material & Labour for new plastered surface of walls surface including scrapind down smoke soot, moulds , moss & efflorecent salts of acrylic exterior emulsion paint (weathercoat) two coats over a coat of wall primer complete all as manufacturrer's instructions, complete all as specified and as directed. |
| 21 | Material & Labour for complete removal of existing treatment of old decorated Wall surface including scraping down smoke soot, moulds , moss & efflorecent salts of acrylic exterior emulsion paint (weathercoat) two coat over a coat of wall primer complete all as manufacturrer's instructions, complete all as specified and as directed. |
| 22 | M&L 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement, complete all as specified and as directed. |
| 23 | M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of ceiling surfaces complete, complete all as directe by Engr-in-charge. |
| 24 | M&L for preparation of old decorated plastered or unplastered surfaces and apply two coats of white wash to macthing with new wall surface including cornices etc, complete all as specified and as directed. |
| 25 | Dismantiling of concrete by chiselling from RCC members like col, beam parapet, facia, chajja, ceiling etc exposing the reinforcement without disturbing the reinforcement and primed with using Araldite epoxy resins manufactured by M/s ciba Geigy Ltd/ FAIR BOND EP/Sika or other approved manufacture and providing doubing coat of 20mm thick in CM 1:3 including necessary form work and reinforced with chicken wire mesh where reqd and rendering 15mm thick in cement mortar 1:3 at any height, complete all as specified and as directed. |
| 26 | S&F in repairs Vitreous china wash down water closet pan (padestal pattern), white (excluding fixing bolts,flushing cistern) incl seat cover and flushung pipe for pedestal pipe etc, complete all as specified and as directed. |
| 27 | S&F chromium plated brass JET including PVC pipe connection fixed to EWC , complete all as specified and as directed.. |
| 28 | S&F CP grating 125mm dia , complete all as specified and as directed. by Engr-in-Charge |
| 29 | S&F Brass chromium plated tubular towel ring (Square/Rectangular type) complete, complete all as specified and as directed. |
| 30 | S&F in repair, toilet paper holder, fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 31 | S&F in repair, CP soap dish holder and fixed to wooden plugs with chrominum plated brass screws and cup washers, complete all as specified and as directed. |
| 32 | M&L Galvanised iron water tubing 15 mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc including taking down the existing tubing complete all as specified |
| 33 | M&L Galvanised iron water tubing 20 mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc including taking down the existing tubing complete all as specified |
| 34 | S&F PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve float and handle, 10 ltr capacity including brakets fixed in repairs |
| 35 | S&F Vitreous china wash hand basin , white, flat back 550x400mm including one number brass CP waste coupling ,32mm dia , PVC waste pipe with connector , brackets 2 nos including cutting for and pinning in ends of brackets complete all as specified |
| 36 | S&F in repair single lever basin mixer with popup waste, suitable for fixing to 15mm bore (dia) GI pipe, complete as all specified and as directed. |
| 37 | S&F 15 mm Angle/stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed in repairs . |
| 38 | S&F 15mm stop valves, (Concealed type) fancy type chromium plated with long shank and cup screwed down, high pressure with crutch or butter fly handle screwed at two right angles ends for both iron pipe or for unions and fixed in repairs . |
| 39 | S&F for flexible PVC Waste pipe of approved quality 32 bore, 75 cm long with one end socketed fixed to waste coupling, compete, complete all as specified and as directed. |
| 40 | S&F PVC connection , reinforced 45cm long 15mm in size with brass check nut and PVC washers at both ends, complete all as specified and as directed. |
| 41 | S&F sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers, waste coupling and waste pipe, over all size 915 mm x 460 mm bowl size 410 mm x 330 x 160 mm including bedding in CM on dwarf wall or incl fitting contilever brackets and conection union to pipe, complete all as specified and as directed. |
| 42 | S&F Bib tap cast copper alloy , chromium plated suitable for 15mm bore iron pipe with long body fancy type complete fixed in repairs, complete all as specified and as directed. |
| 43 | S&F brass chromium plated shower rose of 125mm size, with or without swivel joints including fixing to steel pipe or union in repairs, complete all as specified and as directed. |
| 44 | S&F brass chromium plated tubular towel rail 20 mm dia , D type 60 cm long between CP flanges all as specified |
| 45 | S&F in repair Stainless steel kitchen plate rack of superior quality size 31\\" x 36\\" 10\\" and fixed to wooden plug with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 46 | M&L for chromium plated peg set of 5(PTMT), fixed with screws and plugging to rear side of door shutter in bath, complete all as specified and as directed. |
| 47 | S&F mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame, complete all as specified and as directed. |
| 48 | S&F for glass shelf (with brass brackets) and fixed to wooden plug with chromium plated brass screw and cup washers, sample approved by Engr -in-charge , complete all as specified and as directed. |
| 49 | S&F in Repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 50 | S&F WHB glass Shelf 600 mm long and 125 mm wide as per sample approved by Engr -in-charge complete , complete all as specified and as directed.. |
| 51 | M&L for mild steel pipe 25 mm dia curtain rod with PVC coating fixed in the MS hooks, and finials/side brackets (both side), shade as approved by GE, complete all as specified and as directed. |
| 52 | Taking down chowkats or frame not exc. 1.5 sq m each with shutters (without taking off shutters from the fames) |
| 53 | Taking down chowkats or frame exc. 1.5 sq m but n.exc 4 sq m each with shutters (without taking off shutters from the fames), complete all as specified and as directed. |
| 54 | Taking down shutters of any description exc. 1 Sqm and n. exc. 2 sqm, complete all as specified and as directed. |
| 55 | M&L for MS work as in hold fast and similar small articles complete, complete all as specified and as directed. |
| 56 | S&F for Pressed steel frames size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified. |
| 57 | S&F for Pressed steel frames size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and as directed. |
| 58 | S&F for 40 mm thickness of factory made flush shutter solid core construction with particle board & ply wood face panels, one face with decorative face veneer with lipping/frame to match, commercial type on both side including 40 x 6 thick 2nd class Hard wood lipping on edge, complete all as specified and as directed. |
| 59 | S&F for 2nd class hard wood 35 mm thick glazed and skeleton shutters, factory made, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I, sector 8, clause 8.20 (a), complete all as specified and as directed. |
| 60 | S&F butt hinges medium weight, cold rolled mild steel 100 mm size, complete all as specified and as directed. |
| 61 | S&F 300 mm long mild steel sliding door bolts stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete, complete all as specified and as directed. |
| 62 | S&F Mild steel pressed handles oval type stove enamelled black 150 mm size, complete all as specified and as directed. |
| 63 | S&F Mild steel barrel tower bolts, 200mm long, stove enamelled black, with bright bolt, complete all as specified and as directed. |
| 64 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 75mm, complete all as specified and as directed. |
| 65 | M&L 75mm PVC (SWR) PVC (SWR) floor trap, plain with grating including jointing with solvent cement fixed in repairs, complete all as specified and as directed. |
| 66 | M&L 75mm PVC (SWR) PVC (SWR) gully trap, 125 mm, setting and jointing with solvent cement, complete all as specified and as directed. |
| 67 | S&F magic eye brass best quality fixed in main door shutter approved by Engineer in charge complete, complete all as specified and as directed. |
| 68 | S&F PVC solid door frame of size 50mm x 47mm made out of 5 mm wood grain and edges painted PVC Sheet & edges will be painted to match with printed sheet and to be matched with shutter, reinforced with MS square tube, as per specification and drawing in SSR Part-II, complete all as specified and as directed. |
| 69 | S&F factory made solid panel PVC Door 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded wood grain PVC sheet and edges painted, PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and wood grain PVC sheet and edges painted 10mm thick PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of wood grain PVC sheet and edges painted 10 mm thick PVC sheet to be fitted in MS frame welded/sealed to the 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree) used instead of exposed portion of PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing, complete all as specified and as directed. |
| 70 | S&F aluminum butt hinges, 75 mm size for fixing PVC Door Shutter, complete all as specified and as directed. |
| 71 | S&F for Aluminium handles 125 mm size fixed with screws, complete all as specified and as directed. |
| 72 | S&F for Aluminium tower bolts, 150mm long fixed with screw, complete all as specified and as directed. |
| 73 | S&F 20mm thick factory made PVC flush cupboard shutter with frame consisting of panel of hollow section thickness consisting of frame made out of MS tubes of 19 gauges thickness and size of 19mm x 19mm inserted inside the hollow section of stiles, top & bottom rails and two 19mm x 19mm MS tubes inserted horizontally inside the hallow profile section at an equal distance from top and bottom of door and fixed with hallow profile section using 5mm thick PVC sheet using screws hollow PVC profiles shall be lipped with 10mm (5mm x 2mm) thick x 20mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof water proof and fire retardant prelam PVC sheet using solvent cement on both sides of the panel etc, complete all as specified and as directed. |
| 74 | S&F Hasp & Staple aluminium 100 mm , including bolt to hinge plate and fixed with screws with Cup Board shutter, complete all as specified and as directed. |
| 75 | Dismantling of brick tiles single layer as in roof covering, complete all as specified and as directed. |
| 76 | Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) removing surplus spoil out of Defence Land where directed at a level not exc 1.5 m above the starting point, complete all as specified and as directed. |
| 77 | M&L for PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in benching, roof padding, roof kerbs or mud stops, coping etc rounded or chamfered on edges, complete all as specified and as directed. |
| 78 | M&L for 12 mm thick cement plaster in cement mortar 1:4 with water proofing compound as per manufacturer's instructions to brick or concrete surface finished even and smooth without using extra cement and using waterproofing compound all as specified (WPC shall be measured and paid separately), complete all as specified and as directed. |
| 79 | Supply only integral water proofing compound, complete all as specified and as directed. |
| 80 | Cleaning the surface and made free of dirt, foreign particle, laitance followed by grinding all all protrusion to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expiation contraction. Cutting the grooves with suitable cutter machine in V groove filled with repairs mortar/ microconcrate / general purpose grout as recommended proportionally as per recommendation of manufacture. Making of Gollas at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acylic of cement weight. Make: STP/Asian Paints/Sikka |
| 81 | M&L for 10 mm thick cement plaster in cement mortar 1:4 with water proofing compound as per manufacturer's instructions to brick or concrete surface finished even and smooth without using extra cement and using waterproofing compound all as specified (WPC shall be measured and paid separately) |
| 82 | Supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane cold appliId of spray/brush applied, membrane with an elongation of 280% and tensile strength of 2.7N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin; harder) application with 100% water dilution and Pure polyurethane application in 2 coats with a total min consumption of 1.25 kg per Sqm. Application should be done with Graco sprayer by a company authorised applicator ” of given, complete all as specified and as directed.Make: STP/Asian Paints/Sikka |
| 83 | Demolition of brick work as in walls/parapet wall,s removing grass fungus weed, roots of trees completely, grown on roof/wall surfaces, complete all as directed by Eng-in-charge. |
| 84 | Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and as directed. |
| 85 | Ditto all as per Item No. 84 above but except bricks, complete all as specified and as directed. |
| 86 | S&F 500 ltr rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hosted and fixed in position incl dismantling of existing tank of any description complete, complete all as specified and as directed.ISI marked. |
| 87 | S&F 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed, complete all as specified and as directed.(Minimum weight-210gms.) |
| 88 | S&F for 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed. |
| 89 | M&L for preparation of new wood or wood based surfaces of any description, not otherwise described over 10cm width or girth and applied two coat of synthetic enamel paint over one coat of pink primer complete, complete all as specified and as directed. |
| 90 | M&L for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applied two coat of synthetic enamel paint over one coat of red oxidezinc chrome primer complete, complete all as specified and as directed. |
| 91 | S&F PVC (SWR) pipes with single socketed in any length with rubber ring joints fixed on brick walls 110 mm dia including demolition and braking up existing pipes, complete all as specified and as directed. |
| 92 | S&F PVC (SWR) bends in radius 110 mm bore, complete all as specified and as directed. |
| 93 | S&F 75 mm bore PVC pipes single socketed in any length with rubber ring joints ixed to walls or laid in floor, including demolition and braking up existing pipes, complete all as specified and as directed. |
| 94 | S&F 75 mm dia PVC (SWR ) bends any radius, complete all as specified and as directed. |
| 95 | S&F 75mm dia PVC (SWR ) junction single, (Single T) equal or unequal with rubber rings ljoits fixed to walls, complete all as specified and as directed. |
| 96 | S&F 75mm dia PVC (SWR ) vent cowl, complete all as specified and as directed. |
| 97 | Surface excavation n exc 30cm deep and averaging 15cm deep in soft/loose soil, complete all as specified and as directed.. |
| 98 | M&L for broken stone or boulder hard core of gauge n.exc, 63mm deposited spread and leveled in layers n.exc 15cm thick watered and rammed to a true surface, complete all as specified and as directed. |
| 99 | M&L Cement concrete type C-2, 1:3:6( 20 mm grade agg) 100 mm thick as in sub base of flooring, complete all as specified and as directed.. |
| 100 | M&L 30mm sand cushion, filling under floors or in foundations including watering and consolidation, complete all as specified and as directed.. |
| 101 | M&L for laying 60 mm thick machine pressed precast concrete interlocking paver block and shape and size conforming to IS -15658-2006 of M-35 Grade with grey cement and pigment, complete all as specified and as directed. NOTE: The sample shall be got approved from the GE before buld procurement and lots shall be got tested independtly by the GE. |
| 102 | M&L PCC (1;2:4) type B-1 using 20mm graded stone agregete as in sides of rounded or chamfered on edges of interlocking tiles, complete all as specified and as directed. |
| 103 | Demolition and breaking up drain pipes any dia of bore (SGSW, AC or reinforced concrete) pipe set in cement mortar complete all as specified |
| 104 | Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m, for any type of soil, complete all as specified and as directed. |
| 105 | Ditto all as per item no 104 above, but depth exc 1.5 m upto 3.00 mtr, complete all as specified and as directed. |
| 106 | M& L for reinforced concrete pipes, class NP3, laid and jointed complete with collars 200 mm bore laid in trenches and jointed complete, complete all as specified and as directed. |
| 107 | M&L cement concrete type D2 1:4:8 (40 mm grade aggregate)as in concrete bed to drain pipes 200mm internal dia incl paking under and haunching against the pipe sides of pipe after they are and tested, complete all as specified and as directed. |
| 108 | M&L for precast cement concrete type B-1 1:2:4 (20mm graded aggregate) and set in Cement Mortar (1:4) as in landings, manholes cover slabs, chajjas, shelves and similar articles including necessary form work, complete all as specified and as directed.. |
| 109 | M&L for MS TMT bars 10 mm and over dia and cut to lenth, bent to shape required incl cranking bending spirally for hooping for clos hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed. |
| 110 | Cutting into existing manholes for connecting new drains or sewage line, making good to pipe and rendering ,cutting out existing benching for and forming branch channel in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required internal dia of pipe in 150mm, complete all as specified and as directed. |
| 111 | M&L mild steel work as small articles for handles, holdfasts, steps, rungs, etc knee piece and similar small article complete, complete all as specified and as directed. |
| 112 | Supplying and fixing steel windows/ventilatars 1.25 mm thick Box type (primer coated) ERW hollow 'P' section of size 60 mm x 25 mm single rebated double window (comprises of glazed sutter and gauged shutter) EWR sec 50 mm x 20 mm and 1 mm thick and four openable leaf conisting four Nos sash bar of 'T' section 20 mm x 3 mm complete welded to frame with two vertical mullion of EWR bot 'T' section of size 60 mm x 25 mm and 1.25 mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1, four Nos for each window including following fittings welded to failed shutter:-(a) Holdfasts 150 mm long 12mm x 3 mm made to shape- 4 Nos per window(b) Handle of Z sec 20 mm x 25 mm, 100 mm long - 1 nos per leaf.(c) MS tower bolt 150 mm long - 2 Nos per leaf.(d) 'Z' sec 20 mm x 25 mm , 100 long stopper-01 Nos per leaf,(e) Cleat 55mm long of hollow square 15 mm x 20 mm x 63 mm welded to hinges - 1 Nos per leaf(f) MS pintal hinges of size 75 mm x 12 mm - 2 Nos per leaf.(g) fabriction and fixing arrangement, complete all as specified and as directed.e.Note:- Guard bar/ glass pane and wire gauge shall be measured and Paid saperately. |
| 113 | Ditto all as per item No. 112 above, but in gauged shutters without sash bars, complete all as specified and as directed. |
| 114 | S&F framed work such as grills, gratings, etc .with ends of bars shouldered and/ or riveted , or forget into spikes ; framed guard bars barallel iron doors and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed. |
| 115 | S&F galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks, complete all as specified and as directed. |
| 116 | M&L for 3.00 mm thick glass sheet, ordinary quality and glazing with oil putty in square n. exc 0.5 sq. m in each pane, complete all as specified and as directed. |
| 117 | M&L for preparation of new surfaces of walls including cornices, plasters etc (Plastered or unplastered surfaces) and applying two coats of cement base paint complete, complete all as specified and as directed. |
| 118 | Supply only liquid water proofing compound, complete all as specified and as directed.. |
| 119 | M&L Vitrified Ceramic tiles light shade, 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour tiles over and incl 15mm thick screed bed in CM 1:6, complete all as specified and as directed. |
| 120 | Ditto all as per srl item No.119 above, but in skirting and 10mm thick rendering as backing coat of CM 1:4, complete all as specified and as directed. |
| 121 | M&L for 18-20 mm thick machine cut granite, any colour (of any type ) tiles stone jointed with neat cement slurry mixed with pigment to match the colour of stone incl cutting and polishing and making hole in stone and RCC shelves suitable for gas pipe, with round edges where required and incl 15mm screed bed with CM1:6 including dismentling of existing granite, complete all as specified and as directed. |
| 122 | M&L for framed work as in doors or gates of angle or other section with gusset plates, hold fast rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, complete all as specified and as directed. |
| 123 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing, complete all as specified and as directed. |
| 124 | S&F PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing, complete all as specified and as directed. |
| 125 | S&F 250mm long CP mild steel sliding door bolts stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete, complete all as specified and as directed. |
| 126 | S&F100mm size stainless steel butt hinges for fixing to PVC doors, complete all as specified and as directed. |
| 127 | S&F 200mm long mild steel tower bolt stove enamelled black with bright bolt, complete all as specified and as directed. |
| 128 | S&F 150 mm mild steel pressed handles oval type, stove enamelled black, complete all as specified and as directed. |
| 129 | S&F aluminium anodised tower bolts 200 mm size fixed with machine screws, complete all as specified and as directed. |
| 130 | S&F aluminium anodised Bow Handles 150 mm size fixed with machine screws, complete all as specified and as directed. |
| 131 | S&F in repair sink made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm (minimum), complete all as specified and as directed. |
| 132 | S&F chromium plated grating 125 mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap, complete all as specified and as directed. |
| 133 | M&L for cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick as in sub base of flooring, complete all as specified and as directed. |
| 134 | Uprooting of trees,grass,bushes etc from brick wall/roof tiles or any surfaces of bldg including dismantling the requried brick work /rooftiles/mud concrete etc for uprooting the vegetation etc and make good the same to match existing surfaces with same material or concrete 1:2:4 type B-1 after pouring the chemical (which destroy the growth of vegetation to place where vegetation removed).The rate shall include for scaffolding or any other arrangment required during this process upto 10 mtr height, complete all as specified and as directed. |
| 135 | S&F factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen/Balcony Doors & Cabinets. |
| 136 | S&F factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) One side Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen/Balcony Doors and Cabinets. |
| 137 | S&F auto hinges for cabinet case, complete all as specified and as directed. (Make ; KARF/HETICH) |
| 138 | S&F stainless steel plain basket of size 15”x18”x4” (Make: Everlite/ Slimline/Peacock/Fabshine), complete all as specified and as directed. |
| 139 | S&F stainless steel plain basket of size 15”x18”x6” (Make: Everlite/ Slimline/Peacock/Fabshine), complete all as specified and as directed. |
| 140 | S&F stainless steel plain basket of size 15”x18”x8” (Make: Everlite/ Slimline/Peacock/Fabshine), complete all as specified and as directed. |
| 141 | S&F stainless steel partition of size 17”x20”x6” (Make: Everlite/ Slim line Peacock/Fabshine complete) , complete all as specified and as directed. |
| 142 | S&F stainless steel cutlery of size 17”x20”x6” (Make: Everlite/ Slim line Peacock/Fabshine), complete all as specified and as directed. |
| 143 | S&F stainless steel grain trolly with stand of size 21”x17”x10” (Make: Everlite/ Slimline Peacock/Fabshine), complete all as specified and as directed. |
| 144 | S&F stainless steel cup & soucer, trolly of size 15”x18”x4” (Make: Everlite/ Slim line Peacock/Fabshine), complete all as specified and as directed. |
| 145 | S&F stainless steel Plate basket of size 24\\"x30\\" (Make: Everlite/ Slim line Peacock/Fabshine), complete all as specified and as directed. |
| 146 | S&F 20” long telescopic slider to facilitate drawer slide on steel ball bearing fixed with steel screws complete, complete all as specified and as directed. (Make: Nixon/Radol/Ozone Ultima or Equivalent), complete all as specified and as directed. |
| 147 | S&F 150 mm size stainless steel bright finish handle for cabinet shutter. |
| 148 | S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised., width of flaps when open in 30mm complete all as specified and as directed. |
| 149 | S&F stainless steel soft close hydraulic clip on concealed hinges for full overlay (0 degree crank ) for kitchen cupboard , complete all as specified and as directed. |
| 150 | S&F for anti-dusting rubber beading for door shutter for anti-snakes, dusting etc, complete all as specified and as directed. |
| 151 | M&L for repair to steel rolling shutter of area not exceeding 8 Sqm and any description including repairing of ball bearing, top cover, anchoring rod, hasp and staple, gear operated system, crank handle, chain wheel and hand chain including necessary welding, gressing etc and making the shutters serviceable complete all as per existing pattern as specified. |
| 152 | S&F for fancy toilet paper holder of chromium plated fixed to walls CP brass screws , complete all as specified and as directed. |
| 153 | Dismantling asbestos cement, plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete, complete all as directed by Engr-in-charge. |
| 154 | M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ-150 as in roof overing /cladding to wall, fixed with self tapping screws as specified complete, complete all as specified and as directed. . |
| 155 | Taking down carefully existing point wiring of any type/ any size (ie on wooden/ batten, surface conduit, casing capping or concealed conduit) complete for light, fan, socket or power point etc including removing switches, sockets, holders, ceiling rose, pendants, regulators, light fittings, switch board outlets with sheets and other materials from site for refixing of serviceable light and for taking credit of unserviceable light as per Sch of credit and making good disturbed surface of walls,roof, floors etc. with any type of civil wk involved, complete all as specified and as directed. |
| 156 | M&L for point wiring with modular accessories for light point with 1.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm cable drawn in and including concealed rigid PVC conduit medium grade not less than 20mm dia with accessories including cutting chases for laying of conduit /fixing of boxes in walls/floor etc including making good to disturbed surfaces as per adjoining specification and terminated in and incl sunken pressed steel modular boxes(1.6 mm thick sheet and min 50 mm deep) with suitable modules white cover plate fixed with nickel polished screws etc including FRLS PVC insulated unsheathed multi stranded copper conductor 1.5 Sqmm single core as earth continuity conductor (green colour) connected with earth dolly with thimble complete all as specified and as directed by Engineer-in-Charge. |
| 157 | Ditto all as per srl item No. 156 here-in-before, but for one fan point controlled by one switch complete, complete all as specified and as directed. |
| 158 | Ditto all as per srl item No. 156 here-in-before, but for one socket outlet 5 Amps on independent board complete, complete all as specified and as directed. |
| 159 | Ditto all as per srl item No. 156 here-in-before, but for one socket outlet 5 Amps on the same board controlled by one switch complete, complete all as specified and as directed. |
| 160 | Ditto all as per srl item No. 156 here-in-before, but with 2.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor cable for one 3 Pin 15 Amp socket on independent board incl Modular cover plate and suitable metal sunken box of suitable modules including one 2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable green colour 1100 volts grade as earth wire connected to earth dolly with all accessories complete, complete all as specified and as directed. by Engineer-in-Charge |
| 161 | S&F Modular switch piano flush type, 6 Amps, 240 Volt AC single pole, one way complete, complete all as specified and as directed. |
| 162 | S&F Modular switch piano flush type, 16 Amps, 240 Volt AC single pole, one way complete, complete all as specified and as directed. |
| 163 | S&F Modular socket out let 6 Amp, 5 pin, 2-in-1 flush type complete, complete all as specified and as directed. |
| 164 | M&L in replacement Bell push switch, flush type 5 Amps, SP, 240 volts complete, complete all as specified and as directed. |
| 165 | M&L in replacement Bell electric AC (Ding Dong) 240 volt SP complete, complete all as specified and as directed. |
| 166 | S&F Modular socket outlet multi purpose 2 in 1, 5/6 pin, 6 & 16 Amps, flush type complete, complete all as specified and as directed. |
| 167 | S&F ceiling rose surface type PVC/ polycarbonate 65mm x 50mm three terminal complete, complete all as specified and as directed. |
| 168 | S&F in repair for batten holder insulated body with matching colour back plate, complete all as specified and as directed. |
| 169 | S&F 2 Module five step fan regulator, electronic type, single phase, including connection complete, complete all as specified and as directed. |
| 170 | S&F LED lights fitting 1x 20 Watt, 220V,AC smart extruded aluminium batten (4 ft) with higher efficacy with Microwave sensor to save more energy reduce the light intensity by 70 percent during non occupancy of person with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to tube fitting, complete fitting with all accessories and following specifications, complete, complete all as specified and as directed. by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 110 Lumen per watt. (b) Input Voltage range : 140 to 270 volts. (c) Temp operating range : Minus 5°C to Plus 45°C (d) Power factor : Minimum 0.95 (e) THD : Current THD Max10% and voltage THD max 5% (f) IP rating : IP-20. (g) LED Driver of the same make as of the luminaire. (h) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (j) Surge protection minimum 2.5 kV. (k) CCT : Minimum 6000K (l) CRI :Greater than 90 (m) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily) |
| 171 | S&F energy efficient LED Bldg security light fitting of 35W pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street luminaire, with driver, including electric connection with using 3 core flexible copper conductor cable 1.5Sqmm from ceiling rose to light fitting, fixing the light fitting with new bracket made out of GI tubing light grade 25mm dia, 1.2 metre long bent to shape at 120 degree angle at half metre from bottom, including two Nos clamps made out of MS Flat iron size 25x3 mm with suitable nuts and bolts for fixing of bracket including painting to MS clamp and nut bolts with two coats of aluminium paint over a coat of red oxide primer, complete fitting with all accessories and following specifications, complete, complete all as specified and as directed. by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 120 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) IP rating : IP66. (g) IK rating : Minimum IK07 (h) Built in potted LED Driver of the make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI : Minimum 70 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)(q)LED source : Hi power LED 3 to 5W High power type |
| 172 | S&F MCB SP 6 to 32 Amps 240 V, 10 KA, B curve as per Osafe series of HPL/Acti 9 series of Schneider/Optipro of Indoasian or equivalent in Havells/legrand/Siemens/Hager.complete, complete all as specified and as directed. by Engr-in-charge. |
| 173 | S&F (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 8 Way 240V, suitable for mounting MCB/Isolator etc, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-54 protection class, and including making good disturbed surfaces of walls as necessaty complete, complete all as specified and as directed. by Engineer-in-charge.Note :- MCB/Isolator etc shall be measured and paid separately. |
| 174 | S&F (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 4 Way 240V, suitable for mounting MCB/Isolator etc, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-54 protection class, and including making good disturbed surfaces of walls as necessaty complete, complete all as specified and as directed. by Engineer-in-charge.Note :- MCB/Isolator etc shall be measured and paid separately. |
| 175 | S&F MCB SPN 32 Amps 240 V, 10 KA, B curve as per complete, complete all as specified and as directed by Engr-in-charge. |
| 176 | S&F MCB SPN 40 Amps 240 V, 10 KA, B curve as per complete, complete all as specified and as directed by Engr-in-charge. |
| 177 | S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 16 amp 240 V 10 KA complete all as specified and as directed. |
| 178 | M&L in replacement of sub main wiring with two run of single core FRLS PVC insulated unsheathed multistranded copper conductor cable of 4 Sqmm drawn through in and including PVC rigid non metallic concealed conduit (medium grade) with all fittings including earth continuity FRLS PVC insulated unsheathed multistranded copper conductor cable 4.0 Sqmm complete with any type of civil work involved to make good disturbed surfaces, complete all as specified and as directed.Note : Two run of 4 sqmm wire and one run of 4 sqmm wire as earth wire including PVC concealed conduit shall be measured as one unit |
| 179 | S&F double string wall fan with 400mm sweep. Rated voltage shall be 220-230 Volts. Rated frequency shall be 50 Hz. Rated power input shall be 60W. RPM shall be 1350+/-10%. Rated air delivery shall be 65 CMM. Motor used shall be Class I, permanent capacitor single phase induction motor. |
| 180 | Taking down carefully ceiling fan of any sweep, any size/make dismamtling blades, complete all as specified and as directed. by Engineer-in-Charge. |
| 181 | M&L for Hanging only/ fixing only ceiling fan 1200mm/1400mm sweep after repair & maintenance upto any height upto 5 Mtr complete incl making electric connections, testing complete all as specified and as directed |
| 182 | M&L for XLPE insulated,in replacement PVC sheathed galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 2 core complete laid in trenches passing through pipes/culverts/ under roades/ alon wall , complete all as directed by Engineer-in-charge. |
| 183 | M&L for XLPE insulated,in replacement PVC sheathed galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core complete laid in trenches passing through pipes/culverts/ under roades/ alon wall , complete all as directed by Engineer-in-charge. |
| 184 | Excavation in trenches not exceeding 1.5m in wide and not exceeding 1.5 m in depth for laying of pipe etc and getting out in soft soil, complete all as specified and as directed. |
| 185 | M&L for returning, filling in including spreading leveling watering and well ramming in layers not exc. 25 cm thick, complete all as specified and as directed.(Surplus soil if any shall not be removed but left over the trench) |
| 186 | M&L for removing surplus soil to a distance not exc. 50 M and depositing where directed at a level not exceeding 1.5 Mtr above the starting point, complete all as specified and as directed. |
| 187 | M&L for sand cushioning with clean dry sand to cables with layer of sand 8 cm before laying of cable and 15 cm thick after laying of cable complete, complete all as specified and as directed.Note : For payment purpose punned thickness of 18 cm shall be measured against spread thickness of 23 cm as mentioned in para 19.75 of SSR part-I. |
| 188 | M&L for providing PCC cable cover class LV type-I of size 250x150x40mm laid in perpendicular to the cable abutting each other, complete all as specified and as directed. |
| 189 | M&L for cutting of existing PCC surface any type for laying cables/pipes of size 150mm width and upto 150mm depth complete including making good to disturbed surfaces, complete all as specified and as directed. |
| 190 | S&F galvanised pipe light grade of dia 32 mm bore for passing of cable fixed to poles/walls/laid under floor complete with and including fittings as required compete, complete all as directed by Engr-in-charge. |
| 191 | M&L for boring hole under the road/pavement/hard standing with the help of trenchless technology using ultra sound technique and necessary machine for inserting 50mm GI pipe suitable working pressure not less than one meter below ground level complete, complete all as specified and as directed. by Engineer-in-charge. |
| 192 | M& L for Earthing complete in replacement with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level with the top edge of electrode not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and incl GI lead protection pipe of GI light grade 15mm dia upto 7.5 mtrs and watering pipe 20mm bore of GI medium grade with funnel and wiremesh, earth plate covered on all sides with min 150mm thick alternate layers of charcoal, salt all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing point with PCC chamber and RCC cover in 1:2:4 complete with any type of earth work involved., complete all as specified and as directed. and testing on completion. Note:- PCC Chamber shall be constructed at least 0.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender