Tender For Special Repair To Bldg No Np-26 Of Aicts Pune Under Ge (S) Pune
Tender Value
47.32 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
10 days left
EMD
94640
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No Np-26 Of Aicts Pune Under Ge (S) Pune
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of asbestos cement corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 2 | Dismantiling structural steel work including doors,gates but excluding framed trusses etc complete all as specified and directed. |
| 3 | S & F roof sheeting prepainted galvalume aluminium zinc coating 150 gms GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 4 | S & F roof sheeting prepainted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified incl dismantling of old sheet complete all as specified and directed. |
| 5 | M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plate, gusset plate and also erecting in true position complete all as specified and directed. |
| 6 | M&L Preparation of New or previously untreated Steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide, zinc chrome complete all as specified and directed |
| 7 | M&L Preparation of Old painted Steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of Synthetic enamel paint complete all as specified and directed |
| 8 | Taking down steel windows shutter with frame including bar n exc 1.5 sqm complete all as specified and as directed. |
| 9 | S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352. |
| 10 | S & F ventilators/louvers using 4mm thick x 10cm wide froasted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed :-(a) SP 20048(b) Glazing clips 19352 |
| 11 | Dismantling ceiling /wall linimg/ boarding of any description, fixed in any position like ceiling,lining, partition etc with nails including frame work of timber |
| 12 | S&F POP false ceiling two or more layer (ractangular/ oval/ rounded) decorative design with 12 mm thick glass fibre reinforced Gypsum ceiling tiles of ,prima fine fissured micro look white coloured laid over including grid work 600x600mm using GI powder coated “T:” section grid (Silhaute type) as Main 'T' 38 X25 mm , cross 'T\\" 25x25mm and wall angle 25x25mm grid and 6 mm dia GI suspension wire etc incl over a coat of 1-2 mm thick POP finish including 2 or more coate of oil bound distemper including making niches for fans/light and disign approved by Enger in charge at as specified and directed. (Note : vertical and horizontal etc are measured and paid in flat square) Make-Saint-Gobain, Armstrong,Diamond or Equivalent. |
| 13 | M&L for decorative POP cornices/moulding of pettern as per approved by Engr-in-Charge of cross section area exc. 13 Sqcm and n.exc. 25 Sqcm and fixed including preparation of surface and applying two coats of luster paint over a coat of primer matching with the colour of ceiling all as directed by Engineer-in-Charge. |
| 14 | S&F false ceiling with 9 to 9.5mm thick glass fibre reinforced Gypsum ceiling tiles of size 595 X 595 mm ,prima fine fissured micro look white coloured laid over including grid work 600x600mm using GI powder coated “T:” section grid as Main 'T' 38 X25 mm , cross 'T\\" 25x25mm and wall angle 25x25mm grid and 6 mm dia GI suspension wire etc complete all as specified and directed Make-Saint-Gobain, Armstrong,Diamond. |
| 15 | Demolition of cement concrete un-reinforced in of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 16 | M&L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded aggregate) as in leveling in floor al as specified and directed . |
| 17 | M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but n .exc 1.00 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20 mm thick screed bed in cement sand mortar 1:4 for laying floor finished complete all as specified and directed. |
| 18 | M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but n .exc 1.00 sqm in dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick rendring in cement sand mortar 1:4 finished complete all as specified and directed. |
| 19 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completein floors etc. over 20mm thick screed bed in CM 1:4 complete all as spd and as directed. |
| 20 | -Ditto- all as per item No. 19 above but Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar including 10mm thick backing coat in CM (1:4) and filleting at top etc complete all as specified and directed. |
| 21 | M & L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangle ) area of each tiles exc 0.18 sqm but n.exc 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement laying over 15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 22 | Dismantling wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed. |
| 23 | M & L for glazed ceramic coloured tiles in vertical sufaces 600 x 300 x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 24 | S & F for repairs Vitreous china Wash down water closet (pedestal pattern) white including connect to drain and flushing pipe , antisyphonage pipe and fixing plastic WC seat , closed pattern with recessed bottom, and cover and mild steel chromium plated or aiuminised hinging device etc complete. |
| 25 | S & F for repairs PVC valveless , suphonic action type 10 Ltr cap flushing cistern , low level ,white , with inlet, ball valve , float and handle including bracket and connect to pipes etc. complete all as specified and directed. |
| 26 | S & F Full pedestal wash basin including fixing accessories , size 565 x450 x195 mm complete all as specified and directed. |
| 27 | S&F in repairs bib taps suitable for 15mm bore dia of pipe, chromium plated , cast copper alloy with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule etc complete. |
| 28 | S&F in repairs 600 x 450 mm bevelled edge looking mirror of selected quality glass , mounted on 6 mm thick AC built board or commercial ply board and fixed to wooden plug with chromium plated brass screws and cup washer complete. |
| 29 | S&F in repairs 15 mm bore brass chromium plated fancy type wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. |
| 30 | S&F in repairs 20 mm bore dia Gun-metal, globe or gate valves cast copper, with iron whees head , screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 31 | S&F in repairs CP 15 mm fancy Long body Bib taps brass with wall falnge & Aerator complete all as specified and directed. |
| 32 | S&F in repairs Soap dish CAT No. ACN-1131N Jaquar/BA-259 of Prayag or Cera complete all as specified and directed. |
| 33 | S&F in repairs CP towel rail 20mm dia and 600mm long including brackets conforming to CAT No. ACN-111N of Jaquar/ BA-20 of Prayag , Cera complete all as specified and directed. |
| 34 | S&F in repairs Health faucet CAT No. ALD-583KN of Jaquar/ BEA-85 of Prayag , Cera complete all as specified and directed. |
| 35 | S&F in repairs Angular type stop cock with flange conforming to CAT No. APR -101053 ESSCO of (Jaquar), Cera complete all as specified and directed. |
| 36 | S&F in repairs CP toilet paper holder conforming to CAT No. ACN-1151N of Jaquar/ BA-38 of Prayag , Cera complete all as specified and directed. |
| 37 | S&F in repairs CP towel ring round with round flange conforming to CAT No AEC-1121N ESSCO (Jaquar) , Cera complete all as specified and directed. |
| 38 | S&F in repairs 2 way bib cock with wall flange conforming to CAT No. STE-107041,ESSCO ( Jaquar) , Cera complete all as specified and directed. |
| 39 | S&F in repairs Brass chromium plated shower rose 100 dia with 235 mm long arm with or without swivel joints, including fixing to steel pipe or union Jaquar\\" , Cera or of equivalent make all as specified and directed by Engr-in-Charge |
| 40 | S&F in repairs Pillar taps long neck with aerator CAT No ORB -105001N ESSCO ( Jaquar) , Cera complete all as specified and directed. |
| 41 | S&F in repairs satinless steel Robe Hook (khuti) with 5 Hook complete all as specified and directed. |
| 42 | S&F 100 mm round Stainless steel Grating with waste hole complete all as specified and directed. |
| 43 | S&F 100 mm round Stainless steel Grating complete all as specified and directed. |
| 44 | S&F in 32/40 mm bore PVC flexible waste pipe connecting to waste fitting for WHB / Sink complete all as specified and directed. |
| 45 | S & F PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 46 | Removing of building / demolished materials & debries etc. to a distance more than 5 Km beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed. |
| 47 | M&L for 16 to 18 mm thick machine cut & polished granite slab in cooking platform,window cill and jambs , bedded and jointed with grey cement slurry and pointed with admixture of pigment to match the shade of granite including laying over 20 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 48 | Rounding of edges of granite stone slabs , as in Wash hand basin slab and other similar situations complete all as specified and directed. |
| 49 | Demolition of stone slabs and tiles of any description or thickness in floors, laid bedded and pointed in any mortar , including cement mortar bedding and removing rubbish off the premises complete all as specified and directed |
| 50 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store |
| 51 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store |
| 52 | S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc. fixed to walls and ceilings or laid in floors. |
| 53 | S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors. |
| 54 | Cutting in stone wall for chases, pining in making good to facings where required and painting in in cement mortar 1:3 to ends or edges of landinsgs, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed watter tubing etc and making good , cutting not exc10cm girth as specified and directed. |
| 55 | S&F rotational moulded high density poly-ethylene water storage tanks ( cylindrical vertical with closed top) of capacity1000 litre and conforming to IS, hoisted and fixed in position incl dismantling existing water tank or removing to store complete all as specified and directed. |
| 56 | S&F ball valves suitable for 20 mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and directed. |
| 57 | Demolition and breaking up 100/ 75 mm dia drain pipe (salt glazed ware, AC or PVC ) set in cement complete all as specified and directed. |
| 58 | S& F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 59 | S& F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring including fixed in wall complete all as specified and directed. |
| 60 | S& F 110mm PVC (SWR) bends radius complete all as specified and directed. |
| 61 | S & F 110 mm PVC (SWR) junction double, (double T), equal or unequal with access door complete all as specified and directed. |
| 62 | S& F 110 mm PVC (SWR) vent cowl complete all as specified and directed. |
| 63 | S & F 110mm PVC (SWR) WC connector bent type complete all as specified and directed. |
| 64 | M & L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 65 | S& F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 66 | S& F PVC (SWR) bends wth access door 75 mm radius complete all as specified and directed. |
| 67 | S& F PVC (SWR) bends 75 mm radius complete all as specified and directed. |
| 68 | M & L for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 69 | M & L for 75 mm dia PVC (SWR) mullti floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 70 | Demolition of PCC Block masonary, brick or stone/ boulder masonary, built in cement mortar complete all as specified and directed. |
| 71 | M&L Pre-cast cement concrete type C1 (1:3:6) 20 mm graded stone aggregate. block masonry with solid blocks, exc . 10 cm in width and setting in CM 1:6 complete all as specified and directed. |
| 72 | M&L for rendering 30 mm thick in two layers on stone masonry surfaces or on other than fair faces of brick/PCC block masonry of walls (first layer 20 mm thick in cement mortar 1:6 and second layer 10 mm thick in CM 1:6) and finishing the surface even and smooth without using extra cement including taking down cement plaster on stone/brick walls etc complete all as specified and directed. |
| 73 | M&L for rendering 30 mm thick in two layers on stone masonry surfaces or on other than fair faces of brick/PCC block masonry of walls (first layer 20 mm thick in cement mortar 1:6 and second layer 10 mm thick in CM 1:4 mixed with WPC 3% by wt of cement) and finishing the surface even and smooth without using extra cement inluding taking down cement plaster on stone/brick walls etc complete all as specified and directed. Note :- Supply only WPC shall be measured and paid separately under respective item |
| 74 | M&L for rendering 15 mm thick on fair faces of brick work in cement mortar 1:4 with water proofing compound finished even and smooth without using extra cement .( WPC shall measured and paid separately) complete all as specified and directed. |
| 75 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 76 | M&L for rendering 15 mm thick on fair faces of brick work in cement mortar 1:6 finished even and smooth without using extra cement including taking down cement plaster , racking out joint , hacking for keys and scrubing down with water all specified complete all as specified and directed. |
| 77 | M&L for preparing New plastered surfaces and applying two coats of distemper oil emulsion including chalk whitening including 3 mm thick wall care putty on wall make smooth and even the surface complete all as specified and directed. |
| 78 | M & L for preparation of new plastered surfaces of wall and applying two coats of weather proof exterior paint over & including a coat of exterior-grade primer complete all as speicified and directed |
| 79 | M&L for complete removal of existing treatment on wall surfaces, and applying two coats of weather proof exterior paint over & including a coat of exterior-grade primer including preparation of surfaces complete all as specified and directed. |
| 80 | M&L for complete removal of existing treatment of old wall plaster surface and applying two coats of distemper oil emulsion over a coat of primer including applying 3 mm thick wall putty and prepared the surface even and smooth complete all as specified and directed. |
| 81 | Taking down Chowkats or frames n. exc 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and directed |
| 82 | Taking down Chowkats or frames exc 1.5 Sqm but not exceeding 4 Sq.M each (Without taking off shutters from the frames) complete all as specified and directed. |
| 83 | S & F of pressed steel frames of size (105 X 60mm) for doors with one or more rebates including necessary lugs, hinges, lock strikes plate including M & L for providing PCC type B-0 ,1:2:4 (using 12.5 mm graded stone aggregate) to fill up the hallow portion of frame including making good the distrubed surface complete all as specified and directed by Engr -in- Charge. |
| 84 | S&F Pressed steel farmes 125 x 60 mm for doors with one or more rebates including necessary fixing lungs, hinges, lockstrick plate including M & L for providing PCC type B-0 ,1:2:4 (using 12.5 mm graded stone aggregate) to fill up the hallow portion of frame including making good the distrubed surface complete all as specified and directed by Engr -in- Charge. |
| 85 | S&F for 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both faces is coverde with 0.90 mm thick decorative face veneer including 5 mm thick teak wood lapping around shutter complete all as specified. |
| 86 | S&F 35 mm thick second Class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt-I Section 8, clause 8.24 (a) complete all as specified and directed |
| 87 | S&F Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed. |
| 88 | S&F of 18/19 mm thick Blolck BOARD , grade I quality exterior grade type with decorative face 0.9 mm thick decorative type veneer on both faces including lapping of edges fixed with screws to timber frame work as in CB partition and shelf and other works complete including dismantling of existing boarding complete all as specified and directed. |
| 89 | S&F of 18/19 mm thick Blolck BOARD , grade I quality exterior grade type with decorative face 0.9 mm thick decorative type veneer on one faces including lapping of edges fixed with screws to timber frame work as in CB partition and shelf and other works complete including dismantling of existing boarding all as spd and as directed |
| 90 | M&L for frame work such as grills guard bars,barred iron doors , ladders railing , gratings,etc end bars shouldered and /or riveted and similar work con-forming to Fe 290.Gde -E-165 complete all as specified and directed. |
| 91 | S&F Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per SSR Pt-I specificied and drawing . |
| 92 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam colour PVC sheet on back face with particle board core , supplying & fixing in frame at site as per specification & drawing |
| 93 | S&F 300 mm long stainless steel sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 94 | S&F 100 mm long extruded aluminium alloy with galvanised mild steel hinges pin, anodised and fixed, type C-21complete all as specified and directed. |
| 95 | S& F 200 mm long Stainless steel barrel tower bolts, all as specified and directed. |
| 96 | S&F 150 mm Extruded stainless steel handles, fabricated type, anodised all as specified and directed. |
| 97 | S&F 150 mm size Hasp staple stainless stell mild steel hinges pin including bolt to hinges plate fixed with screw. complete all as specified and directed . |
| 98 | S&F 100 mm stainless steel handle for kitchen cabinet and drawer complete all as specified and directed. |
| 99 | S&F continuous Piano hinges, mild steel bright finished or electro galvanised width of flap 30 mm.complete all as specified and directed. |
| 100 | S&F of Magnet catches and striking plate complete all as specified and directed. |
| 101 | S&F 300 mm Mild Steel spring for doors , ordinary rat tail rod pattern springs including roller and roller platecomplete all as specified and directed. (Fixing in pressed steel frame) |
| 102 | S&F in repairs 25 mm dia Stainless steel fency type curtain rod complete all as specified and directed. |
| 103 | S&F Stainless steel fency type curtain rod caps/ side bulbs, etc to be fitted in 25 mm curtain rod pipe complete all as specified and directed. |
| 104 | M&L Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed |
| 105 | M&L for precast coloured chequered cement concrete tiles, glossy finish of size 305 x 305 x 25 mm thick machine pressed set jointed and pointed with grey cement and pigmenrt in floor and cut and polished including 20 mm thick screed bed in cement motar 1:4 including dismantiling of demolition of concrete tiles. |
| 106 | M&L for 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base / flooring complete all as specified and directed. |
| 107 | M&L cement concrete type B0 1:2:4 using (12.5 mm graded aggregate) , as in roof kerbs , rounded chamfered on edges , in lintel upto 1.5 m clear span, cill, steps, seismic and other similar bands, plinth courses string courses, lacing courses , copings kneelers, apex including weathering , slightly rounded or chemfered angles and throating etc. necessary form work |
| 108 | M&L for 75 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded aggregate)as in flooring/ Plinth protection Finish even & smooth complete all as specified and directed. |
| 109 | Cutting in brick wall exc half brick but n. exc one brick in built in cement mortar or cement lime mortar and stone walls for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed. |
| 110 | S&F aluminium powder coated single leaf door on pivots alongwith hydraulic door closer, door lock, handles, 6mm thick frosted / plane glass i panel and etc., fixed with rubber beading and glazing clips and using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved all as directed by Engineer-in-Charge including taking down of existing (a) Rectangular tube 14005 (b) Shutter vertical (c) Shutter top rail 19503 (d) Shutter Middle rail 060 (d) Shutter Middle rail 060 (e) Shutter Bottom rail 19511 (e) Shutter Bottom rail 19511 (f) Glazing clips 19352 |
| 111 | S&F aluminium powder coated partition using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved with 12 mm thick both side prelaminated particle board interior grade of approved colour in bottom panel and 5 mm thick plain glass in top panel fixed with aluminium clips, beads, rubber gaskets etc., centre to centre distance of vertical member shall not exceeding 1mtr and horizontal member shall not exceeding 1.10 mtr using following aluminum section as specified in Jindal Catalogue complete as directed fixing to stone masonary walls with & including Ist class teak wood plugs of size 20mmX20mm at an interval of 0.5m alround the track including drilling holes and taking down of existing :-(a) SP – 20048 (b) DP - 20047 (c) Glazing clips - 19352 |
| 112 | S&F 12mm thick toughened safety glass door shutters (transparent or frosted) frame less with smooth, gloosy or polished edges or bevelled edge, top/bottom hinges(patch) fittings, floor springs, swing type, soft close, door on pivots alongwith 02 Nos stainless steel handles on each leaf, door lock including all fitting and fixtures, (Make : SAINT GOBAIN OR EQUIVALENT) all as approved and directed by Engr-in-Charge |
| 113 | Dismantling framed work of timber scantling 40 sqcm and over in section in any position complete all as specified and directed. |
| 114 | Dismantling framed work of timber fillets, rails, posts, rafters, purlins etc under 40 sqcm in section complete all as specified and directed. |
| 115 | M&L for 16 to 18 mm thick machine cut & polished granite slab in vertical surfaces like skirting, dado and jointed with grey cement slurry and pointed with admixture of pigment to match the shade of granite including 15 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 116 | Taking down carefully point wiring (light, fan, socket or power), complete, (fitting such as switches,ceiling rose, pendent, regulators etc) for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor to match with existing surface etc. |
| 117 | M & L for Point wiring any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade, FRLS ISI-694 marked in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes with earth dolly duly concealed in wall, painted with two coats of anti corrosive paint over a coat of red oxide primer, internally, covered with modular white cover plate with frame suitable for modular switches, including providing circuit wire from DB to switch board with PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) single core cable and PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly, complete all as specified for the following:- |
| 118 | One light point /Fan point / exhust point controlled by one, one way switch 5 Amps complete all as specified. |
| 119 | Socket outlet, three pin, 5 Amp, independent complete all as specified. |
| 120 | Socket outlet, three pin 5 Amps on the same board complete all as specified. |
| 121 | Bell/Buzzer points controlled by one bell push. complete all as specified. |
| 122 | All as per Item No 117 above but ,with stranded copper conductor 2.5 Sq. mm (nominal area), including PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) including providing circuit wire 2.5 sqmm from DB to switch board and single core as earth continuity conductor to common earth and connecting to earth dolly. complete all as specified. |
| 123 | S & F Ceiling rose, surface Bakelite suitable for 3 pin 230 volt 50 Hz AC supply complete all as specified |
| 124 | S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified. |
| 125 | S & F for Modular Switch , single pole, one way, and 15/16 Amp single module complete all as specified. |
| 126 | S & F for for Bell push modular 6 Amps single module complete all as specified. |
| 127 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 128 | S & F for Modular Switch Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.nd |
| 129 | S & F for modular step type(5 Step) fan regulator 100 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 130 | Suply and fix Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specifiedd and directed |
| 131 | Supply and fix bell electric Ding dong suitable for 230 volt 50 Hz AC supply complete all as specified and directed. |
| 132 | Taking down ceiling fan of any size/sweep after disconnecting the wire from existing ceiling rose and refixing the same after cleaning dust, oiling greasing and two coat spray painting and writing MES No with black paint of size 2 Cm including providing Hanging Rod clamp nut bolt of sufficiennt length as per site eequirement and flexible three core from ceiling rose to connector of fan complete all as specified and directed. |
| 133 | Taking down existing sub main wiring and M& L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated cable with stranded copper conductor of size 04 Sq. mm nominal area and drawing , in PVC conduit including PVC insulated 2.5 Sqmm (nominal area) stranded copper conductor earth wire complete. NOTE: - Two runs of 4 sqmm cable,one run of 2.5 sqmm cable and one run of PVC conduit will be measured as one unit |
| 134 | S&F in replacement of 20 watt,230V, IP 40 high efficenct 125 LM/W surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper condctor cable from ceiling rose all as specified. |
| 135 | Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m complete all as specified and directed.(Note: Old exhaust fan should be deposited in MES store yard) |
| 136 | S&F in MCB DB,SPN, sheet metal enclosure, 8 way with100 amps rated bus bar double door, with locking arrangement concealed in wall including cutting & good to disturbed surfaces including takin down old UNSV MCB DB , complete all as specified and directed |
| 137 | Supply and fixing MCB Single pole and neutral rated capacity 32 A, 240 V breaking capacity 9KA C series |
| 138 | Supply and fixing of MCB Single pole rated capacity 5 to 32 A, 240 V breaking capacity 9KA C series |
| 139 | S & F Sheet metal, 20 amp Single pole and neutral enclosure with a two pin and earth plug and socket complete fixed in wall including cutting & good to disturbed surfacesl with one single pole MCB 20 amps,10 KA breaking capacity,'C' series,240 V complete all as specified and directed. |
| 140 | Taking down carefully Geyser of capacity up to 25 ltrs from its position for repair/servicing such as removal of dust, checking, leakage testing ,rubber etc and replacement of heating element , thermostate and NRV as per existing sample and size and re-assembling at its position with fastner after repair, and connecting to electric system with suitable size of 3 core cable and industrial plug top complete all as specified & directed. |
| 141 | M & L for Earthing complete with galvanized steel plate electrode 60 cm x 60 cm x 6 mm surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25 meter below ground level with top edge of the earth plate at a depth of not less than 1.50 meter below ground level connected to galvanized iron or steel earth wire, 4 mm dia (No. 8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron, earth wire protected by galvanized steel pipe 15 mm dia (Light grade) & connected to main switch or main control board all as shown in electrical plate No.3 of SSR-2009 Part I & including necessary excavation and earth work. The rate also include charcoal and salt in alternate layers 20 mm dia pipe (Light grade) for watering, protection pipe, funnel, wire mesh, PCC chamber in cement concrete (1:3:6) type C-I, 40 mm thick RCC (1:2:4) type B-1 cover and CI frame etc complete all as specified and directed . |
| 142 | Supply, installation,in replacement of outdoor CPRI Approved LT meter panels fabricated with 2.0mm thick CRCA MS sheet for load bearing members and 1.6mm thick for doors and covers and shall be painted with epoxy powder paint by means of elctro static gun after rigorous pre treatment comprising of cold phosphating process on all internal and external surfaces after due preparation of surfaces. The panel shall consit of 1.5 times of switch gear rating TPN bus bars of copper and shall be provided with colour coded heat shrinkable sleeves. The distribution box shall be provided with compartments for eMCB and meter with double stud hinged door, front openable and suitable for 1100 Volts grade, 3 phase, 415 Volts, 50 cycles, AC Supply. The panel shall be provided with MS angle iron frame 40 X 40 X5 mm welded in shape and including necessary grouting in PCC 1:3:6 type C-1 by using 20 mm graded stone aggregate completed with legs 30 cm in ground in PCC and 40 cm above ground including connecting to cable with cable gland, lugs etc complete including taking down of old unserviceable panel.(Note: Old meter should be deposited in MES store yard) The following items are to be provded in the panel board :- (a) MCCB TPN 200Amps capacity, rup capacity 25 Ka at 415 Volt, 50 Hz, AC Supply - 01 No (b) MCB SPN 40 Amps capacity, rup capacity 10 Ka at 230 Volt, 50Hz,AC supply, 'C' series - 10 Nos (c) Electronic meter temper proof LCD display with parameters to show data, time, current reading, load, PF, voltage and KWH 10 to 60 A - 7 NOs (d)CTs of ratio 200/5 A , 5 VA - 3 Nos ,(e) VAF meter Indicator Lamp Red/yellow/Blue- 1 set |
| 143 | S&F in repair LED Street Light Luminaire 35 Watt comprising of epoxy powder coated pressure die cast aluminium housing, 10 KV SPD with system efficiency greater then or equal 110 lm/W including all UNSV taking down of light fiitings complete all as specified and directed by Engr in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender