Tender For Repairs To Wooden Furniture For Married And Otm Accn At Vijay Durg Under Ge(Fw) Kolkata
Tender Value
24.50 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
10 days left
EMD
49000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairs To Wooden Furniture For Married And Otm Accn At Vijay Durg Under Ge(Fw) Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | BED HARD (MAP) [DRG NO : FD/E6/MAP/08(R)] |
| 2 | Removing of old unserviceable head board of bed hard and S&F new one 18mm thick Pre-laminateed MDF board with ISI mark (ISI-2406) both side teak shade , exterior grade with 4 mm teak wood beading and to be fixed with screw as per drawing and specification complete all as specified and directed. |
| 3 | All as per item No 1.01 but for foot board . |
| 4 | Welding to existing broken/cracked joints of bed hard and grinding for even and smooth gas welding complete all as specified and directed. (Note : Welding of broken/cracked joints shall be counted one point for one joint). |
| 5 | S&F 8mm dia bolts and nuts and tightening the steel framing structure of bed hard as in repair as per drg and specification complete all as specified and directed. (Note: Each bolts and nuts shall be measured as one unit) |
| 6 | M&L removal of old paint from surfaces of steel framing structure and applying two coats of Synthetic Enamel black paint (first quality) over a coat of red oxide zinc chrome primer , to all sides of steel framing structure of bed hard complete all as specified and directed. |
| 7 | Removing of old unserviceable hard rubber shoe from leg and S&F with new one as per existing of approved quality complete all as specified and directed. |
| 8 | Removing of old unserviceable hard rubber cap from leg and S&F with new one as per existing of approved quality complete all as specified and directed. |
| 9 | Removing of old unserviceable top ply from bed hard and S&F 12mm thick ply wood (7 ply) commercial of BWR grade, securing with dirlling two holes of each stiffner 8mm dia round head countersunk bolts and nuts with washer (06 Nos) as per existing shape and size complete all as specified. |
| 10 | PEG TABLE [DRAWING NO : FD-277, 384]Removing following unserviceable components from Peg Table and S&F new components as per the following and fixing the same without disturbing the other parts complete wherever shown on drawing and making functional the furniture as per drg and specification :- |
| 11 | M&L removal of unserviceable top of peg table in any position and S&F new table top made of 18mm thick MDF exterior grade, lamination (teak shade) with teak wood beading extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed by Engr-in-Charge. |
| 12 | Leg made out of 1st class hard wood (teak) |
| 13 | Top rail (shorter) made out of 1st class hard wood (teak) |
| 14 | Top rail (longer) made out of 1st class hard wood (teak) |
| 15 | PVC hard rubber shoe of approved quality |
| 16 | S & F Ist class Teak wood bracket as per suitable size triangular( 08 Nos in a table) fixed with screws.complete all as specified. |
| 17 | TABLE CENTRE [Drg No: FD-29M, FD-235 & FD-274]Removing following unserviceable components from Table Centre and S&F new components as per the following and fixing the same without disturbing the other parts including polishing complete wherever shown on drawing and making functional the furniture as per drg and specification. |
| 18 | M&L removal of unserviceable top of table centre in any position and S&F new table top made of 18mm thick MDF board exterior grade, lamination (teak Shade) with teak wood beading extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed by Engr-in-Charge. |
| 19 | Leg made out of 1st class hard teak wood |
| 20 | Top rail (shorter) made out of 1st class hard teak wood |
| 21 | Top rail (longer) made out of 1st class hard teak wood |
| 22 | S & F Ist class Teak wood bracket as per suitable size triangular( 08 Nos in a table) fixed with screws.complete all as specified. |
| 23 | PVC hard rubber shoe of approved quality |
| 24 | BED HARD PLYWOOD TOP WITH MNF SET [DRG NO : FD-21(M), FD-246] |
| 25 | S&F Top of bed plywood made out of 12mm thick, 7 ply, grade BWR, type BB commercial ply (IS-303) including taking down old one complete all as specified and as directed. Make Archidply/Century Ply/ Green Ply |
| 26 | S&F Head Board with legs made of teak wood covered with 4mm thick plywood 3 ply BWR grade, type BB, with decorative face veneers on one face or as per drawing. |
| 27 | S&F Foot Board with legs made of teak wood covered with 4mm thick plywood 3 ply grade BWR, type BB, with decorative face veneers on one face including taking down old one complete all as per drawing |
| 28 | S&F new teak ply of head board front and back of Bed hard including taking down old one complete all as per drawing |
| 29 | S&F new teak ply of foot board front and back of Bed hard including taking down old one complete all as per drawing |
| 30 | S&F Long rail made out of Ist Class hard wood (Teak wood) including taking down old one complete all as per drawing |
| 31 | S&F Stiffener made out of Ist Class hard wood (Teak wood) including taking down old one complete all as per drawing. |
| 32 | S&F new L shape MS clamp as per suitable size rest all as specified and directed by Engr-in-charge. |
| 33 | CHAIR DINING FD [DRG NO : FD-279/1105, 250, 20(M)]Removing following unserviceable components from chair dining and supply and fix new components as per the following and fixing the same without disturbing the other parts complete wherever shown on drawing and making functional the furniture as per drg and specification :- |
| 34 | Rear leg made out of 1st class hard wood (teak) |
| 35 | Front leg made out of 1st class hard wood (teak) |
| 36 | Side rail made out of 1st class hard wood (teak) |
| 37 | Front Rail made out of 1st class hard wood (teak) |
| 38 | Rear rail made out of 1st class hard wood (teak) |
| 39 | Back rest made out of 1st class hard wood (teak) |
| 40 | Stiffener made out of 1st class hard wood (teak) |
| 41 | PVC hard rubber shoe of approved quality |
| 42 | CHAIR EASY [DRG NO : FD-17 (M), 229, 1108]Removing following unserviceable components from chair easy and supply and fix new components as per the following and fixing the same without disturbing the other parts complete wherever shown on drwing and making functional the furniture as per drg and specification :- |
| 43 | Front leg made out of 1st class hard wood (teak) |
| 44 | Rear leg made out of 1st class hard wood (teak) |
| 45 | Front/back rail made out of 1st class hard wood (teak) |
| 46 | Side rail made out of 1st class hard wood (teak) |
| 47 | Arms made out of 1st class hard wood (teak) |
| 48 | Rail of seat frame made out of 1st class hard wood (teak) |
| 49 | Rail of back rest frame made out of 1st class hard wood (teak) |
| 50 | PVC hard rubber shoe of approved quality |
| 51 | TABLE WRITING [DRAWING NO : FD-27, 249, 33M, 275]Removing following unserviceable components from Table writing and supply and fix new components as per the following and fixing the same without disturbing the other parts complete wherever shown on drawing and making functional the furniture as per drg and specification :- |
| 52 | long rail made out of 1st class hard wood (teak) |
| 53 | short rail made out of 1st class hard wood (teak) |
| 54 | Leg made out of 1st class hard wood (teak) |
| 55 | complete Box of the table including shelf, left /right side, back ply made out of 18mm thick MDF exterior grade, lamination (teak shade) |
| 56 | Stiffnner made out of 1st class hard wood (teak) |
| 57 | Box back ply 6mm thick 3 ply commercial plywood conforming to IS-303 type BB duly polished |
| 58 | Front shutter made out of 18mm thick MDF exterior grade, lamination (teak shade) duly polished. |
| 59 | M&L removal of unserviceable top of table writing in any position and S&F new table top made of 18mm thick MDF exterior grade, lamination (teak shade) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed by Engr-in-Charge. |
| 60 | Drawer made of teak wood with 6mm thick 3 ply commercial plywood conforming to IS 303 type BB shall be provided bottom of drawer duly polished |
| 61 | steel Knob round (as per sample) recessed 38mm dia fixed with 20mm screw. |
| 62 | TABLE 1200x900x760MM [DRG NO : FD-224, 283, / FD/MAP-II/03] Removing following unserviceable components from Table 1200x900x760mm and S&F new components as per the following and fixing the same without disturbing the other parts complete wherever shown on drawing and making functional the furniture as per drg and specification :- |
| 63 | M&L removal of unserviceable top of table 1200x900x760mm in any position and S&F new table top made of 18mm thick MDF exterior grade, lamination (teak shade) with teak wood beading extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed by Engr-in-Charge. |
| 64 | Legs made out of 1st class hard wood (teak) |
| 65 | Long side rail made out of 1st class hard wood (teak) |
| 66 | Short Side rail made out of 1st class hard wood (teak) |
| 67 | S & F Ist class Teak wood bracket as per suitable size triangular( 08 Nos in a table) fixed with screws.complete all as specified. |
| 68 | PVC hard rubber shoe of approved quality |
| 69 | TABLE 900x600x760MM WITH/WITHOUT DRAWER[DRG NO : FD-41, 42, 241, 223, 224, 283, 284]Removing following unserviceable components from Table 900x600x760mm with/without drawer and S&F new components as per the following and fixing in position all as specified and drected by Engr-in-Charge. |
| 70 | M&L removal of unserviceable top of table in any position and S&F new table top made of 18mm thick MDF exterior grade, lamination (teak shade) with teak wood beading extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed by Engr-in-Charge. |
| 71 | Leg made out of 1st class hard wood (teak) |
| 72 | Long side rail made out of 1st class hard wood (teak) |
| 73 | Short side rail made out of 1st class hard wood (teak) |
| 74 | Drawer made of teak wood and 6mm thick 3 ply commercial plywood conforming to IS 303 type BB shall be provided bottom of drawer duly Frenck polished. |
| 75 | steel Knob round (as per sample) recessed 38mm dia fixed with 20mm screw. |
| 76 | S & F Ist class Teak wood bracket as per suitable size triangular( 08 Nos in a table) fixed with screws.complete all as specified. |
| 77 | PVC hard rubber shoe of approved quality |
| 78 | TABLE 900x900x760MM [DRG NO : FD-224, 283] Removing following unserviceable components from Table 900x900x760mm and S&F new components as per the following and fixing the same without disturbing the other parts complete wherever shown on drawing and making functional the furniture as per drg and specification :- |
| 79 | M&L removal of unserviceable top of table in any position and S&F new table top made of 18mm thick MDF exterior grade, lamination (teak shade) with teak wood beading extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed by Engr-in-Charge. |
| 80 | Legs made out of 1st class hard wood (teak) |
| 81 | Side rail made out of 1st class hard wood (teak) |
| 82 | S & F Ist class Teak wood bracket as per suitable size triangular( 08 Nos in a table) fixed with screws.complete all as specified. |
| 83 | PVC hard rubber shoe of approved quality |
| 84 | TABLE DINING 6 PERSON [DRG NO : FD-239, 273, FD/MAP-II/03] Removing following unserviceable components from Table Dining 6 Persons and S&F new components as per the following and fixing the same without disturbing the other parts complete wherever shown on drawing and making functional the furniture as per drg and specification :- |
| 85 | M&L removal of unserviceable top of table dining 6 persons in any position and S&F new table top made of 18mm thick MDF exterior grade, lamination (teak shade) with teak wood beading extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed by Engr-in-Charge. |
| 86 | Leg made out of 1st class hard wood (teak) |
| 87 | Long side rail made out of 1st class hard wood (teak) |
| 88 | Short side rail made out of 1st class hard wood (teak) |
| 89 | S & F Ist class Teak wood bracket as per suitable size triangular( 08 Nos in a table) fixed with screws.complete all as specified. |
| 90 | PVC hard rubber shoe of approved quality |
| 91 | TABLE DINING 8 PERSON [DRG NO : FD-239, 273, FD/MAP-II/03] Removing following unserviceable components from Table Dining 8 Persones and S&F new components as per the following and fixing the same without disturbing the other parts complete wherever shown on drawing and making functional the furniture as per drg and specification. |
| 92 | M&L removal of unserviceable top of table dining 8 persons in any position and S&F new table top made of 18mm thick MDF exterior grade, lamination (teak shade) with teak wood beading extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed by Engr-in-Charge. |
| 93 | Leg made out of 1st class hard wood (teak) |
| 94 | Long side rail made out of 1st class hard wood (teak) |
| 95 | Short side rail made out of 1st class hard wood (teak) |
| 96 | S & F Ist class Teak wood bracket as per suitable size triangular( 08 Nos in a table) fixed with screws.complete all as specified. |
| 97 | PVC hard rubber shoe of approved quality |
| 98 | TABLE DRESSING LADIES WITH MIRROR [Drawing No: FD-378 & FD/MAP-II/07]Removing following unserviceable components from Table Dressing Ladies and S&F new components as per the following and fixing the same without disturbing the other parts complete wherever shown on drawing and making functional the furniture as per drg and specification:- |
| 99 | Drawers |
| 100 | Top made out of 18 mm thick Prelaminated MDF Board with teak wood beading |
| 101 | Bottom made out of 12 mm thick teak ply one side |
| 102 | Side frame of 18 mm thick MDF Board and back base of ply 6 mm teak face |
| 103 | mirror of 5 mm thickness |
| 104 | steel Knob round (as per sample) recessed 38mm dia fixed with 20mm screw. |
| 105 | TABLE DRESSING GENTS WITH MIRROR (FD-230)Removing following unserviceable components from Table Dressing gents and S&F new components as per the following and fixing the same without disturbing the other parts complete wherever shown on drawing and making functional the furniture as per drg and specification:- |
| 106 | New top of MDF Board 18mm thick and with Ist class seasoned teak wood beading 4mm thick all around including polishing to beading made to shape all as shown on drawing. Specified and directed by the Engr-in-Charge. |
| 107 | S&F in replacement of side with new side of 18 mm thick pre laminated MDF Board, exterior grade and including 4mm thick teak wood beading all-round.d. |
| 108 | All as per item No 19.01 but replacement of bottom with S&F new 18 mm thick pre laminated MDF Board, exterior grade. |
| 109 | All as per item No 19.01 but replacement of mirror of size 380 x 760 x 5.5mm thick with teak wood frame complete all as shown on drawing. |
| 110 | S&F in replacement of chromium plate knob 25 mm dia of best quality and as approved by Engr-in-Charge. |
| 111 | Removing broken/unserviceable hanging clip and S&F new MS Hanging Clips as per suitable size and fix with screw rest all specifed by Engr-in-charge. |
| 112 | TABLE BED SIDE [Drg No: FD-276 & FD-265]Removing following unserviceable components from Table Bedside and S&F new components as per the following and fixing the same without disturbing the other parts and making functional the furniture as per drawing and specification :- |
| 113 | Top with 18mm thick pre-laminated MDF board exterior grade one side natural teak faced including teak wood beading on the top. |
| 114 | Side with 18mm thick pre-laminated MDF board exterior grade one side natural teak faced including teak wood beading around the side |
| 115 | Partition shelf made of 18mm thick pre-laminated MDF board |
| 116 | back of 6mm thick ply wood commercial BWR with required size of screw all as specified and as directed by Engr-in-Charge. |
| 117 | Removal of existing polish from wooden surfaces of under mentioned articles of wooden furniture, cleaning the same using sand paper, smoothing properly without leaving any untouched woooden surfaces and polishing the same with two or more coats of French polish of appropriate shade, as approved / directed by the Engineer-in-Charge :- |
| 118 | Bed ply wood top [Drg No: FD-21(M) , FD-246] |
| 119 | Peg Table [Drawing No : FD-25, 227, 277, 236 & 384] |
| 120 | Table centre [Drg No: FD-29M, FD-235 & FD-274] |
| 121 | Table writing [Drg No: FD-33(M) & 275] |
| 122 | Table dressing ladies with mirror [Drawing No: FD-378 & FD/MAP-II/07] |
| 123 | Table bed side FD-276 |
| 124 | Table 1200 x 900 x 760mm Drg No -291, FD/MAP-II/03 |
| 125 | Table 900x900x760 mm wooden [Drg No : FD-88(M) & DB-3955] |
| 126 | Table 900x600x760mm with/without drawer [Drg No : FD-55(M),42(M) & 284] |
| 127 | Teapoy [Drg No : FD-34(M), DB-3975, FD-234 & FD-278, FD-382] |
| 128 | Table dining 8 persons [Drg No :FD-30(M), 239 &273, FD/MAP-II/03] |
| 129 | Table dining 6 Persons [Drg No: FD-30(M), 239 & 273, FD/MAP-II/03] |
| 130 | Chair Dining [Drg No: FD-16(M), 228 & 279, 1105] |
| 131 | Chair Easy [Drg No: FD-FD-17(M) & 229] |
| 132 | Chair Writing [Drg No: FD-20(M), 250 & 280] |
| 133 | RECANING OF DIFFERENT TYPE OF CHAIR AND FURNITURE [DRG NO: FD-15, 228, 279, 280, 150, 252, 27, 76(M) & FD-2]Removing of old/worn out cane plastic and recanning with 2mm wide half round cane plastic white of superior quality for seat and back (as applicable) and 3mm wide half round cane plastic on the borders locked in at 125mm intervals complete all as per drawing/directed by Engr-in-Charge :- |
| 134 | Chair Dining |
| 135 | Chair Easy |
| 136 | Chair writing |
| 137 | Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender