Tender For Special Repair To Bldg No P-1046 At Afs Jalhalli
Tender Value
86.34 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
0 days left
EMD
1.54 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-1046 At Afs Jalhalli
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-Oct-2026 | Date pospond | Date | 28-Oct-2026 |
| 2 | 13-Oct-2026 | BOQ Revised | BOQ | 28-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soils complete all as specified and as directed. |
| 3 | Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 km above the starting point in soils complete all as specified and as directed. |
| 4 | Material & Labour for broken stone boulders hard core of guage not exceeding 63mm deposited spread and leveled laid in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 5 | Material & Labour for Cement concrete 1:2:4 type B1using 20 mm graded stone aggregate as in lintels, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, padding, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed . |
| 6 | Material & Labour for Cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in foundation, filling and for mass concrete all as specified and directed |
| 7 | Material & Labour for Pre-cast PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 built in cement mortar of any description complete all as specified and as directed. |
| 8 | Material and labour for PCC 1:2:4 type B1 (using 20mm thick graded stone aggregate) as in bed plates, including weathering, slightly rounded or chamfered angles and throating, coping etc including necessary form work complete all as specified and directed. |
| 9 | Material & Labour for cement concrete 1:2:4 type B1(using 20 mm graded crushed stone aggregate) as in surface channel of drain, benching in manhole & coping finished even and smooth with using extra cement complete all as specified and as directed. |
| 10 | Material & Labour for Pre-cast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate set in cement mortar 1:6 as in cover slab including all necessary form work. Exposed surfaces of concrete shall be finished even and smooth without using extra cement complete all as specified and directed. |
| 11 | Material & Labour for cement concrete (1:4:8) Type D2 (using 40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and as directed. |
| 12 | Material & Labour for reinforced cement concrete (nominal mix) type B-1,1:2:4 using 20mm graded aggregate for beams, cantilevers,bressummers, lintels etc complete all as specified and as directed. |
| 13 | Supply Only integral water proofing compound complete all as specified and as directed. |
| 14 | Material & Labour for walling of random rubble, uncoursed, Bangalore type masonry well bonded bedded solidly hearted built in CM 1:6, extra over stone walling for hammer dressing to face stones and dressing of face beds and joints all as specified and directed. |
| 15 | Fixing only walling random rubble, uncoursed, Bangalore type masonry (except stone) well bonded bedded solidly hearted built in CM 1:6, extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified, key pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:4 all as specified and directed. (NOTE:- Old stones retrived from demolition/dismantling shall be re-used) |
| 16 | Material & Labour for Granite 18 to 20mm thick (table rubbed and polished) in steps,Jamps, Pillars, Windows, cills, platforms and like CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with marble shade of Granite over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) all as specified and as directed. |
| 17 | Use & waste of formwork to rough finished surfaces of sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batterrough finished surfaces of concrete measured flat for foundation complete all as specified and as directed. |
| 18 | Complete removal of existing water proofing treatment of any description and in any position including PCC padding any thickness and cleaning, wire brushing, watering & removal of debris outside MOD land.NOTE :-Unit rate quoted shall also include for removal of PVC water storage tank and water pipe lines wherever existing carefully and refixing at the same or other position after completion of roof repair work |
| 19 | Taking down chowkhat or frame (wooden/steel) exceeding 1.50 Sqm and not exceeding 4.0 Sqm each with shutter (with out taking off shutters from the frame) all as specified and as directed. |
| 20 | Taking down shutters of any description exceeding 1.0 Sqm and not exceeding 2.0 Sqm each complete all as specified and directed. |
| 21 | Taking down chowkhat or frame(wooden/steel) not exceeding 1.5 Sqm each with shutter (with out taking off shutters from the frame) all as specified and as directed. |
| 22 | Supply and Fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed. |
| 23 | Supply and Fixing in Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 24 | Material & Labour for Second class hard wood plain, solid, straight Chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 25 | Supply and Fixing for 30 mm thick factory made flush shutter solid core construction with block board core and plywood face panels, comercial type on both faces complete all as specified and directed. |
| 26 | Supply and Fixing for 2nd class hard wood 35mm thick Factory made plain framed panelled shutter (Two Panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 27 | Supply and fixing 100mm long Butt hinges medium weight cold rolled stainless steel, and fixed complete all as specified and as directed. |
| 28 | Supply and Fixing aluminium handles cast type anodised 200 mm long complete all as specified and as directed. |
| 29 | Supply and fixing 150 mm long aluminium anodized barrel tower bolt extruded section complete all as specified and as directed. |
| 30 | Supply and fixing aluminium handles cast type anodized 150 mm long complete all as specified and as directed. |
| 31 | Supply and Fixing 300mm aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudud sections or cast- aluminium alloy and fixed complete all as specified and as directed. |
| 32 | Supply and Fixing Aluminium body door closer hydraulically regulated,designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed including taking existing one complete as directed. |
| 33 | Supply and Fixing in repairs floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 140mm complete all as specified and as directed. |
| 34 | Supply and Fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete all as specified and directed. |
| 35 | Supply and Fixing in repair tubular towel rail brass chromium plated 20 mm dia 'D' type 60 cm long between flanges complete all as specified and as directed. |
| 36 | Supply and Fixing in repair 20-25mm thick SS curtain rail incl brackets fixed into wall using wooden plug, screw etc complete all as specified and directed. |
| 37 | Material & Labour for preparation of old plastered surfaces of wall by using pressure washer, removal all dirt and dust and applying one coat of exterior emulsion weather proof paint complete all as specified and as directed. |
| 38 | Material & Labour for MS Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 complete all as specified and directed. |
| 39 | Supply and Fixing MS angle iron Hand rails, fencing posts, flat iron including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 40 | Supply and Fixing welded steel wire fabric cut to length, bent to shape required and tying with and including annealed mild steel not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members not exceeding 4kg/sqm including taking down old one complete all as specified and directed. |
| 41 | Material & Labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 42 | Material & Labour for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 43 | Supply and Fixing Powder coated aluminium frame/shutters/ for doors/window/ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws etc complete all as specified. Note : (i) Glazing and wire mesh shall be measured and paid separetely. (ii) Item shall be paid as per weight of aluminium section. (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arrangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. |
| 44 | M&L framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 |
| 45 | Supply and Fixing in repair galvanised two strand steel barbed wire 2.24 mm dia barbed wire with 2 mm barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised MS wire staples or steel pins etc as directed (each line wire to be measured) |
| 46 | Supply and Fixing in repairs collapsible steel gates, top hung,consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets including dismantling old one , complete all as specified and directed. |
| 47 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including taking down/ dismantling of old one complete all as specified and directed. |
| 48 | Material & Labour for Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed. |
| 49 | Material & Labour for APP polymeric membrane min weight 3.0kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric(wt not less than 150 gms/sqm laid on primed surfaces by torch application method complete all as specified and directed. |
| 50 | Material & Labour for preparation of new surfaces of any description not otherwise described over 10cm width or girth and applying two coats of solar reflective aluminium paint @ 0.10 kg/sqm of membrane surfaces complete all as specified and directed. |
| 51 | Supply and Fixing Pre painted Coloured Galvalume roofing sheets 0.50 mm thick having Zinc aluminium alloy coating double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws and including dismantling of any type of old sheets in roof coverings complete all as specified & directed. |
| 52 | Supply and Fixing in repairs Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws etc, including dismantling of old one complete all as specified and directed. |
| 53 | Supply and fixing anodised alunimun size 605 x 605 mm snap grid frame work for false ceiling as per manufacturer instructions, with Hangers 6 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and including 18mm thickgypsum designer tiles, fixed to sheet suitably placed in false ceiling grid made of aluminium/G.I./ M.S.as per pecification and drawing and including dismantling old unservicable wall and celing board & including frame with of any type and description, complete all as specified and directed. |
| 54 | Roughening surfaces of old concrete floors by picking, sweeping clean and washing down with waters to remove dusts etc. complete all as specified and directed. |
| 55 | Material & Labour for Brushing neat cement slurry with 3kg/sqm all as specified and directed. |
| 56 | Material & Labour for 75 mm thick PCC type C1, 1:3:6 (20 mm graded stone aggregate) as in plinth protection finishing the surface even and smooth with using extra cement all as speecified and as directed. |
| 57 | Material & Labour for PCC (1:4:8) type D2 using 40mm graded aggregate 75mm thick as in sub base of floor finished even and rough to receive top layer all as specified and directed and demolition of old concrete (un reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 58 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 59 | Material & Labour for Vitrified Ceramic tiles 8-10 mm thick, (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer, 15 mm thick in Cement Mortar (1:6) complete including dismantling of existing old tiles and disposal to outside MD land all as specified and as directed. |
| 60 | Material & Labour for Vitrified Ceramic tiles 8-10 mm thick, (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertcal surfaces such as skirting/ dado etc. set and jointed in neat cement slurry and pointed in coloured / white cement to match the tiles inc rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat including dismantling of existing old tiles and disposal to outside MD land all as specified and as directed. |
| 61 | Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) and removing rubbish off from premises & M&L for ceramic coloured tiles of size 350mmx250mm/ 300mm X 450mmx7 to 8 mm thick, on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured / white cement to match the tiles inc rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc complete all as specified and directed. |
| 62 | Dismantling floor, floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and supplying and fixing Joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile of size n exc 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incuding screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:6) complete all as specified and directed. |
| 63 | Material and labour for 25 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring surface as in level course etc including demolition of existing old cement concrete, including disposal of demolition material upto 500mtr from MD land complete all as specified and directed. |
| 64 | M & L for 10 mm thick screed bed or bedding layer of mortar in cement mortar (1:4) for laying roof finish as padding finished with liquid WPC as per manufacturer instructions, complete all as specified and directed NOTE :- Integral WPC shall be measured and paid separately. |
| 65 | Apply oil bound bitumen primer @ 0.40 Litre / Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg / Litre at 25 degree Celsius on the prepared dry roof surface complete all as specified and as directed. |
| 66 | Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses with cement or cement lime mortar complete all as specified and directed. |
| 67 | Material and labour for keyed pointing in cement mortar 1:4 to random or polygonal rubble including racking out joints / points in cement mortar to squared rubble masonary coursed or un coursed etc complete, all as specified and directed. |
| 68 | Material & Labour for 300mmx300mmx25mm thick pre-polished cement concrete chequered tile jointed in neat cement slurry and pointed in white or coloured cement to match the floor, complete, all as specified and directed. |
| 69 | Material & Labour for screedbed or bedding layer of mortar 20mm thick for laying floor finishes in CM 1:6 complete all as specified and directed. |
| 70 | Material & Labour for cement plaster rendering 15mm thick on fair faces of brick/concrete surfaces with two coats i.e. (10mm thick backing coat in CM 1:6 and 5mm thick finishing coat in CM 1:4) and mixed with liquid water proofing compound as per manufacturer instructions, finished even and smooth without using extra cement (WPC to be measured and paid separately) and Taking down old cement plaster on brick or stone walls, or concrete walls etc., hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises complete all as per specified and directed. |
| 71 | Material & Labour for cement plaster rendering 10mm thick in CM 1:6 on fair faces of brickwork or concrete surface as on wall finished even and smooth without using extra cement and taking down old cement plaster on brick or stone walls, or concrete walls etc., hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises complete all as per specified and directed. |
| 72 | Material & Labour for cement plaster rendering 5mm thick in CM 1:3 on fair faces of brickwork or concrete surface as in ceiling finished even and smooth without using extra cement and taking down cement plaster on ceilings surface etc., hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises complete all as per specified and directed. |
| 73 | Material & Labour for applying two coat of cement based paint over a coat of primer, including preparation of newly plastered wall surfaces with smooth finish of any description, complete all as specified and as directed. |
| 74 | Material & Labour for preparation of new plastered surfaces of walls applying wall care putty of one coat over plastered surface to prepare the surface even and smooth finish and applying two finishing coat of oil bound distemper over a coat of primer complete all as specified and directed. |
| 75 | Material & Labour for preparation of newly plastered surfaces of ceiling and applying three coats of white washing on ceiling surfaces with smooth finish complete all as specified and directed. |
| 76 | Material & Labour for Preparation of old decorated surfaces of walls by Washing, rubbing down and stopping of distempered and painted surfaces,applying one coat of wall 1mm thick care putty and then applying two coats of premium oil bound distemper over one coat of primer as per manufauture instruction of required shade complete all as specified and directed. |
| 77 | Material and labour for Preparation of old decorated plastered or unplastered surface of wall, washing down, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , trading, oil, greasy spots and applying one coat of cement based paint complete all as specified and as directed. |
| 78 | Material and labour for Preparation of old plastered or unplastered surface of ceiling and applying one coat of white wash complete all as specified and directed. |
| 79 | Supply and Fixing 4 mm thick sheet glass ordinary quality and glazing complete in square n exc 0.50sqm in each pane complete all as specified and directed. |
| 80 | Supply and Fixing 4mm thick figured glass, pin head type and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed. |
| 81 | Material & Labour for Providing two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth including preparation of new steel surfaces all as specified and directed. |
| 82 | Preparation of new wood or wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 83 | Material & Labour for Preparation of old painted surfaces of steel and applying one coat of synthetic enamel paint over 10 cm width or girth, not other wise described complete all as specified and as directed. |
| 84 | Supply and Fixing in repair viterous china squatting pan 'Orissa pattern ' size 580 x 440mm white with integral foot rests incl connecting to 'P' or 'S' trap and to flush pipe anti syphonage pipe etc complete including provn of lime concerte bedding and making good to floor complete all as specified and as directed. |
| 85 | Supply and Fixing Wash hand basin table counter type 560x400x200mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block, including long shank pillar tap, Brass chromium plated waste coupling 32mm bore, Waste pipe bottle trap, including taking down existing one complete all as specified and directed. |
| 86 | Supply and Fixing in repairs Vitreous China, half stall Urinal (back or corner wall type), complete including providing and fixing plugs, CP Urinal spreader, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed |
| 87 | Supply and Fixing in repairs PVC low level flushing cistern 10 Lit capacity including necessary brackets incl connecting flush pipe etc and making good the disturbed surfaces complete all as specified and as directed. |
| 88 | Supply and Fixing In repair 25 mm dia Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed |
| 89 | Supply and Fixing in repairs Bib taps cast copper alloy chromium plated fancy type screwed down screwed for iron pipe or for brass ferrule and fixed for 15 mm bore complete all as specified and as directed. |
| 90 | Supply and Fixing in repairs CP 2 way bib cock with wall flange fancy type screwed down screwed for iron pipe in repairs 15mm bore complete all as specified and as directed. |
| 91 | Supply and Fixing Angular stop cock, chromium plated valves high pressure screwed both ends iron pipe or for unioins 15mm dia, including taking existing one complete as directed. |
| 92 | Supply and Fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including taking down existing one complete all as specified and as directed. |
| 93 | Supply and Fixing Towel Ring stainless steel chromium plated round including taking down existing one complete all as specified and as directed. |
| 94 | Supply and Fixing in repair Chromium plated soap dish including fixing arrangement complete all as specified and directed . |
| 95 | Supply and Fixing PVC connections 15mm size with PTMT nuts of length 450 mm including taking down existing one complete all as specified and directed. |
| 96 | Supply and Fixing in repair looking mirror of size 600mm x 450mm on commerical ply wood 6mm thick with PVC/ wooden moulding beading fixed to wooden plugs with chromium plated brass, screws and cup, washers, aluminium frame and fixed complete all as specified and directed. |
| 97 | Supply and Fixing in repairs grating doom 125mm dia with waste hole of Chromium plated (Min wt 40 gms) complete all as specified and as directed. |
| 98 | Supply and Fixing in repairs PVC waste pipe 32/40mm bore for WHB, Urinal & Sink complete all as specified and as directed. |
| 99 | Supply and Fixing Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm fixed in repairs all as specified and directed. |
| 100 | Supply and fixing in repairs 20mm dia gun metal gate valve with iron wheel screwed both ends for iron pipe all as specified and directed. |
| 101 | Supply and Fixing Rotational moulded polyethylene water storage tank of 1000 Ltrs capacity cylinderical vertical with closed top including 3 Nos GI check nuts and tank nipple of 25mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I including taking down of old unserviceable tank complete all as specified and directed. |
| 102 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and taking out old unsericeable steel/plastic/cpvc water tubing and connections by cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 103 | Supply and fixing 20 mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including taking up or down old steel tubing all as specified and directed. |
| 104 | Supply and Fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches bore of pipe 75 mm with PVC clamps and saddles including taking down old existing pipes and dismantling of cast iron/RCC/PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings complete all as specified and as directed |
| 105 | Supply and Fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches bore of pipe 110 mm with PVC clamps and saddles including taking down old existing pipes and dismantling of cast iron/RCC/PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings complete all as specified and as directed |
| 106 | Supply and Fixing in repairs PVC (SWR) bends of any radius with access door bore of pipe 75 mm complete all as specified and as directed. |
| 107 | Supply and Fixing in repairs PVC (SWR) bends of any radius with access door bore of pipe 110 mm complete all as specified and as directed. |
| 108 | Supply and Fixing in repairs PVC (SWR) junction single (single T) equal or unequal with access door bore of pipe 75 mm complete all as specified and as directed. |
| 109 | Supply and Fixing in repairs PVC (SWR) junction single (single T) equal or unequal with access door bore of pipe 110 mm complete all as specified and as directed. |
| 110 | Supply and Fixing in repairs 125/ 110 mm bore PVC (SWR) floor trap plain with grating incl jointing with solvent cement complete all as specified and as directed. |
| 111 | Dismantling the existing unservicible gully trap including chamber and material and labour for provision of new salt glazed stoneware gully trap, square or round mouth type \\"P\\" of size 180X150mm, including setting and jointing in cement mortar 1:1 in chamber with plain cement concrete base in PCC 1:2:4 type B1, brick work in cement mortar 1:4, rendering in cement mortar 1:4, all around finished even and fair using extra cement, Precast cover slab in RCC 1:2:4 type B1 using 20mm graded stone aggregates, reinforcement with 8 mm dia in both ways etc, including provision of handle etc complete all as specified and as directed. |
| 112 | Material & Labour for salt glazed stone ware drain pipes of internal dia 150 mm bore grade 'A' laid in trenches and jointed incl demolition and breaking up drain pipe (salt glazed stoneware drain pipe) set in cement concrete, internal dia 200 mm and complete all as specified and as directed. |
| 113 | Material & Labour for concrete bed to drain pipe including packing under and haunching against the sides of drain pipe after they are laid and tested in PCC 1:3:6 type C-2 for 150mm dia drain pipe complete all as specified and directed |
| 114 | Demolition of cement concrete (unreinforced) of Concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed. |
| 115 | Material & Labour for Repair to ends of chajjas/ parapets by removing old concrete, loose material & cleaning of the reinforcement and finishing the surface with rich cement mortar 1:3 , finished fair & even and making good with existing finishes complete all as specified and as directed.Note: Rate quoted by the tenderer shall be deemed to inclusive of double steel scaffolding. |
| 116 | Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed. |
| 117 | Demolition of brick/stone/pcc block masonary work built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding washer facing dressed stone work and precast concrete articles complete all as specified and as directed. |
| 118 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.complete all as specified and as directed |
| 119 | Taking down carefully copper/aluminum point wiring (light, fan,Power) complete fittings such as switches, ceiling roses pendents, regulators sockets light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of wall, floors, roof etc, complete all as specified and directed . |
| 120 | Taking down carefully copper/aluminum point wiring (light, fan,Power) complete fittings such as switches, ceiling roses pendents, regulators sockets light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of wall, floors, roof etc, complete all as specified and directed . |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 28, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Today
Oct 28, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
TodayOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender