Tender For Restoration Of Rain Damages To Lwss Majheen Sialkar Kotu In Tehsil Jawalamukhi Distt Kangra (Hp) (Sub Head: - Construction of Reinforced Cement Concrete Jackting To Existing Collection Tank, Filter Beds, Path And Protection Work Etc.)
Tender Value
90.23 Lakhs
Estimated cost
Bid Submission
03 Oct 2026
1 days left
EMD
1.60 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages To Lwss Majheen Sialkar Kotu In Tehsil Jawalamukhi Distt Kangra (Hp) (Sub Head: - Construction of Reinforced Cement Concrete Jackting To Existing Collection Tank, Filter Beds, Path And Protection Work Etc.)
BOQ
| Sl. No. | Item Description |
| 1 | Demolition above G.L. including stacking the serviceable materials and disposing of un-serviceable materials with in 20 mtrs lead and including cutting the necessary reinfircement and separating out from RCC/RB work complete in all respect. |
| 2 | Excavation in foundation trenches etc. in all kinds of soil such as pick work,jumper work, blasting hard or soft rock, by chieselling where the blasting work is prohibited, slushy, daldal and saturated soil including pumping or bailing out water with in all heights stacking the excavated soil with in all leads clear from the edge of excavation and then returning the stacked soil in 15 cms. layers when_required in to plinths, sides of foundations consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as per the direction of Engineer - in-charge with in all leads and lifts complete in all respect.Pick work 50% Jumper Work 50% |
| 3 | Providing and laying cement concrete 1:3:6(1 cement,3 sand,6 graded stone aggregate 40 mm nominal size )and curing complete excluding cost of form work in foundation and plinth with in all leads and lifts complete in all respect. |
| 4 | Providing and laying cement concrete 1:1½:3 (1 cement, 1½ sand, 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for RCC work in (a) Walls (any thickness) partition and the like including attached pillasters, butteresses, plinth and string courses etc from top of foundation level to floor -2 level with in all leads and lifts complete in all respect.Foundation Footing |
| 5 | Wall (any thickness but not less than 0.10 mts. Thickness)attached pillasters, buttresses plinth, & string courses etc.from top of found.level upto floor two level |
| 6 | In linten beam girders brsess umers & centileversup to floor level |
| 7 | Arches upto floor two level. (Dom Slab) |
| 8 | Suspended floors, roofs, landing and shelves and their supports balconies, beams, girder, bressumers and cantilever up to floor-2 level with in all leads and lifts complete in all respect. |
| 9 | Prov. form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish i/c centring shuttering, strutting & propping etc. with wooden battens & ballies, ht. of propping & centring below supporting floor to ceiling not exceeding 4.00 mts. & removal of the same for in situ-reinforced concrete & plain concrete work :- Vertical surfaces such as wall (any thick.) partitions & the like i/c attached pillasters, buttresses, plinth & string courses & the like. |
| 10 | Flat surfaces such as soffits of suspended floor roofs landings and the like floors etc. up to 200 mm in thickness including all leads and lifts complete in all respect. |
| 11 | Pdg. Form work of ordinary timber planking so as to give a fair finish i/c centering, shuttering and rermoval of the same for in situ RCC and plain concrete work in :- Arches etc. above 6.00 mtrs span. |
| 12 | Providing tor steel reinforcement for RCC work including bending binding and placing in position with in all leads and lifts complete in all respect. |
| 13 | Providing & fixing SFRC manhole cover with frame having size of 500 mm internal dia (Medium duty) with in all leads and lifts complete in all respect.Heavy duty |
| 14 | Providing and laying cement concrete 1:5:10 with 15% plum (1 cement,5 sand, 10 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth with in all leads and lifts. |
| 15 | Boulder filling dry hand packed under floor complete. |
| 16 | 20mm thick in single coat on rough side of brick/ stone masonry for interior plastring up to floor two level including arrises, internal rounded angles, chamfers and / or rounded not angles exceeding 80mm girth and finished even and smooth. |
| 17 | 6mm thick cement plaster to ceiling c.m 1:3 (1cement :3 sand). |
| 18 | P/L heavy duty precast concreet of inter-locking block compacted M 30grade i/c border of curb gras or colored and under layer of sndut to 30mm thickness in all respect all lead and lift. (sub base concreet floor to measured and paid seprately Heaving thickness 60mm as per drawning and technical specification clause 1504 complete in all respect. |
| 19 | Brick Masonry using common brunt clay building bricks in super stracture above plinth level. up to floor two level. Cm 1:4 (1cement :4 sand). (2nd class bricks). |
| 20 | Providing and laying cement concrete 1:2:4(1 cement, 2 sand, 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for RCC work in (a) Foundation and plinth. |
| 21 | Steel work welded in built up sections, trusses & framed work i/c cutting, hoisting & fixing in position & applying a priming coatof red paint :- In grating, framed, guards, bars, ladders, railing, brackets & similar works. |
| 22 | Manufacturing and Supplying of fencing pannel of size 1.80 X 1.20 metres of jali25x25mm mesh welded to MS black tube 32 mm dia of 14 gauge with MS flat cover 20x3 mm MS hold fasts 7Nos made put of MS flat 32X5 mm inculding cutting welding painting with red axide paint complete in all respect and as per dircection of Engineer-in-Charge. |
| 23 | Constructing chamber for sluice valve, with CI surface box 100 mm top dia.,160 mm bottom dia. & 180 mm deep(inside) with chained lid RCC top 1:2:4 mix (1 cement:2 sand :4 graded stone aggregate 20 mm nominal size) 100mm thick foundation concrete 1:5:10 mix (1cement : 5 sand: 10 graded stone aggregate 40 mm nominal size) & inside plastering with cement mortor 13 (1 cement: 3 sand) finished with a floating coat of neat cement i/c curing complete. 600x600x750 mm inside size With 150 mm thick walls of RCC 1:2:4 (1 cement 2 sand:4 graded stone aggregate 20mm nominal size) complete with form work & reinforcement with 6 mm bars at not exceeding 150 mm centres both ways |
| 24 | Providing & fixing cast steel double flanged sluice valve of make Leader of size 150 mm & class ASA-300 having one size higher to delivery size of pump and capable of with standing nominal seat pressure as per BIS: 1414-API-600 complete with nuts, bolts and rubber insertion sheet of 52 Kgf/cm² complete in all respect. |
| 25 | Providing & fixing cast steel double flanged sluice valve of make Leader of size 150 mm & class ASA-300 having one size higher to delivery size of pump and capable of with standing nominal seat pressure as per BIS: 1414-API-600 complete with nuts, bolts and rubber insertion sheet of 21 Kgf/cm² complete in all respect. |
| 26 | Pdg. Providing & fixing double flanged C.I sluice valve of standard make such as Leader/Kirloskar make & class PN 1.6 and capable of with standing nominal seat pressure and confirming to BIS:780-1984 latest complete with nuts, bolts and rubber insertion sheet complete in all respect. 150 mm dia |
| 27 | Providing & fixing double flanged cast steel swing check type reflux valve make Kartar/BIR/ Leader having bye pass arrangement and of size equal to dia of rising main of 150 mm dia & class ASA-300 & shall be suitable for withstanding nominal seat pressure of 52 Kg/cm2 as per BIS:1868-API-600 complete in all respect. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender