Tender For Construction Of Bio-Fertilizer & Bio- Pesticide Lab. At 2Nd Floor Of Asc Ltd., Khanapara.
Tender Value
38.95 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
0 days left
EMD
77908
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Bio-Fertilizer & Bio- Pesticide Lab. At 2Nd Floor Of Asc Ltd., Khanapara.
BOQ
| Sl. No. | Item Description |
| 1 | Civil Works :- 4.1..Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 2 | 5.2..Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | 5.3..Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). |
| 4 | 5.9Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts |
| 5 | 5.9.19...Weather shade, Chajjas, corbels etc., including edges |
| 6 | 5.9.20..Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick |
| 7 | 5.9.21..Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick |
| 8 | 5.22...Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. …5.22.6..Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | 6.38..Providing and laying autoclaved aerated Concrete (AAC) blocks masonry with 100mm / 125 mm thick with Grade 1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work. |
| 10 | 9.1….Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). ....Kiln seasoned and chemically treated hollock wood. |
| 11 | 9.20..Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. ..9.20.1...35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 12 | 9.48..Providing and fixing MS Grills of required pattern in frame of windows etc with MS Flats, square and round bars etc including primimg coat with approved steel primer all complete….9.48.2..Fixed to openings/windows frame with rawl plug, screw etc. |
| 13 | 9.56….Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete : ….9.56.1...125x90x4.00 mm |
| 14 | 9.62..Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) … 9.62.1..300x16 mm |
| 15 | 9.74...Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : ..9.74.1...250x10 mm |
| 16 | 9.81...Providing and fixing bright finished brass handles with screws etc. complete: 9.81.1..125mm |
| 17 | 10.17...Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. |
| 18 | 11.41...Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. 11.41.1....Size of Tile 600x600 mm |
| 19 | 11.41A...Size of Tile 600 x 1200 mm |
| 20 | 11.41A.3...Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm |
| 21 | 11.56...Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.1...Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent |
| 22 | 12.45...Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.45.3...12.5 mm thick tapered edge gypsum moisture resistant board. |
| 23 | 13.1..12 mm cement plaster of mix : 13.1.1….1:4 (1 cement: 4 fine sand) |
| 24 | 13.2...15 mm cement plaster on the rough side of single or half brick wall of mix : 13.2.1….1:4 (1 cement: 4 fine sand) |
| 25 | 13.16...6 mm cement plaster of mix : 13.16.1...1:3 (1 cement: 3 fine sand) |
| 26 | 13.22….Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. |
| 27 | 13.26...Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 28 | 13.46….Finishing walls with Acrylic Smooth exterior paint of required shade : …13.46.1...New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 29 | 13.48...Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : ..13.48.1…Two or more coats applied on walls @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm |
| 30 | 13.48.2...Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture |
| 31 | 13.48.3...Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture |
| 32 | 21.1….Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.2.2...Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 33 | 21.3...Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.3....With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) |
| 34 | 22.5...Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 35 | Water Supply & sanitary installation:- 17.3...Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.3.1....W.C. pan with ISI marked white solid plastic seat and lid |
| 36 | 17.4...Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.4.1....One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 37 | 17.7...Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.4...White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 38 | 17.7.8...White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers |
| 39 | 17.8...Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 40 | 17.28….Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.28.2...Flexible pipe …32mm dia |
| 41 | 17.29...Providing and fixing 100 mm sand cast Iron grating for gully trap. |
| 42 | 17.31….Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 43 | 17.69...Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. 17.69.1….Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 44 | 17.72…..Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 45 | 18.8….Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia .Pipes. |
| 46 | 18.9…..Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work.....20 mm nominal outer dia. Pipes. |
| 47 | 25 mm nominal outer dia. Pipes. |
| 48 | 32 mm nominal outer dia. Pipes. |
| 49 | 18.48...Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 50 | 18.50….Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms...15 mm nominal bore. . |
| 51 | 18.52...Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. …15 mm nominal bore. |
| 52 | 18.74...Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour….15 mm nominal bore with 45 cm length. . |
| 53 | 19.21...Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : ...For pipes 100 to 250 mm diameter |
| 54 | 12.41….Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. ….75 mm diameter |
| 55 | 110mm diameter |
| 56 | 12.42….Providing and fixing PVC moulded fittings/accessories for unplasticised Rigid PVC pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. ..12.42.1..coupler…..75 mm |
| 57 | 110mm diameter |
| 58 | 12.42.3…Single tee with door ….75x75x75 mm |
| 59 | 110x110x110 mm |
| 60 | 12.42.4…Single tee without door …..75x75x75 mm |
| 61 | 110x110x110 mm |
| 62 | 12.42.5...Bend 87.5° …75mm bend |
| 63 | 110mm bend |
| 64 | 12.43….Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. ...110mm |
| 65 | Internel Electrification Works :- 1.4...Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC |
| 66 | 1.3.3...Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable etc. as required. |
| 67 | 1.14...Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 1.14.11: 4 X 16 sq. mm + 2 X 6 sq. mm earth wire |
| 68 | 1.42...Installation, testing and commissioning of pre- wired, fluorescent fitting / compact fluorescent fitting of all types,complete with all accessories and tube/lamp etc., including supplying and fixing ball and socket arrangement, 2 Nos. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core |
| 69 | 1.45...Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable including providing and fixing phenolic laminated sheet cover |
| 70 | 2.2.4...Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling hole in cubicle panel, making connections, etc. as required.200 A, 16 KA,TPMCCB |
| 71 | 2.4.2...Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4 + 18), Double door |
| 72 | 2.10.3...2.10.3 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole |
| 73 | 2.13...Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.100 A |
| 74 | 1.27.6..Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.12 Module (200mmX150mm) |
| 75 | 1.25...Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including necessary fittings |
| 76 | Earthing with G.I. earth pipe 4.5 Meter long dia including accessories enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 77 | NS- Linear LED Tube 6W |
| 78 | NS- Linear LED Tube 12W |
| 79 | NS- Premium model 1200 mm Sweep CROMPTON make), Premium model 1050 mm Sweep CROMPTON make) |
| 80 | 8.2.3..Air conditiner 1.50 TR with 5 star BEE Rating |
| 81 | 8.2.4..Air conditiner 2.0 TR with 5 star BEE Rating |
| 82 | Supplying and fitting fixing Exhaust fan |
| 83 | Office Furniture :-NS-Supplying and providing the MS Office Table with both side drower of Size 5ft x2.5 ft as per direction of engineer incharge |
| 84 | NS-Supplying and providing the office chair as per direction of engineer incharge |
| 85 | NS-Supplying and providing the steel Almirah as per direction of engineer incharge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender