Tender For Repair And Maintenance Of Toilets And Bath Rooms At Hwbf Talcher Plant Site For The Year 2026-27.
Tender Value
8.03 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
3 days left
EMD
16077
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anugul → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Toilets And Bath Rooms At Hwbf Talcher Plant Site For The Year 2026-27.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-Oct-2026 | CORRIGENDUM | Date | 09-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing stone rubble masonry / Brick masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 2km lead as per direction of Engineer-in-charge. |
| 2 | Providing and laying plain cement concrete 1:4:8( 1 cement :4 sand :8 graded stone aggregate) with 40mm nominal size stone aggregate of approved quality in foundations,plinth,and under floor including ramming,leveling,curing,formwork wherever necessary etc. all complete as per drawings,specifications and as directed by the Engineer-in-charge.. |
| 3 | Providing and laying reinforced cement concrete of grade 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate) with 20mm nominal size stone aggregate of approved quality in roofs, slabs, lintels, beams, chajjas, columns, walls, vertical/horizontal fins and all kinds of maintenance works including drip moulds, centering, shuttering, scaffolding, consolidating, curing etc., all complete at all levels as per specifications and as directed by the Engineer-in-charge but excluding cost of reinforcement. |
| 4 | Providing and fixing white vitreous china flat back half stall urinal brand like jaguar, johnson,perryware, or cera of size 580x380x350 mm with white PVC automatic flushing cistern,with fittings, standard size C.P. brass flush pipe, spreaders withunions and clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern complete as per the direction of Engineer-in-charge. |
| 5 | Providing and fixing white vitreous china orissa pattren W.C pan of size 580x440mm with integraltype foot rests with 100 mm sand cast iron P or S trap , 10 liter low level white P.V.C flushing cistern with manually controlled device ( handle Lever ) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. and as directed by the Engineer-in-charge. |
| 6 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required and as directed by the Engineer-in-charge. |
| 7 | Providing and fixing White Vitreous China Table Top wash basin brand like jaguar, johnson,perryware, or cera size 550x400mm with single 15mm C.P brass pillar tap with CI brackets,15 mm flexible inlet pipe ,and 32 mm cp brass waste coupling with standard pattern,including painting of fittings and brackets etc. all complete as directed by the Engineer-in-charge.. |
| 8 | Providing and fixing fixtures of approved quality with ISI mark, on existing drinking water pipe line net work and sanitary fixtures after removing the old damaged fixtures including cost of fixtures, scaffolding, cutting and making good the wall/floor etc., all complete at all levels as per specifications and as directed by the Engineer-in-charge.. |
| 9 | a) 15mm dia Nominal bore brass bib cock of ISI marked and minimum weight 400 grams. |
| 10 | b) 15mm dia Nominal bore brass stop cock of minimum weight 400 grams. |
| 11 | Supplying and fixing of GI pipe (Medium quality) confirming to IS 1239 complete with ISI marked GI fittings for all external works below ground level as per specifications and as directed by the Engineer. (Tata/Jindal/ other approved brand by EIC). Example 1\\" dia pipe of length 6 meter will execute 6 quantity. |
| 12 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approvedmake in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. complete as per the direction of Engineer-in-charge. |
| 13 | Providing and fixing Ist quality vitrified wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make and brand like johnson or kajaria, in all colours, shades except burgundy, bottle green, black of any size as in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete as per the direction of Engineer-in-charge. |
| 14 | Providing and applying two or more coats of Distempering with 1st quality acrylic distemper (ready mixed) , having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour, of approved manufacturer and shade over already distempered / primed scrapped surfaces of walls in residential quarters and public buildings including preparation of surface by scrapping and applying wall putty (as per the requirement) for distempering, cost of Brush, Sand paper, Wall Putty, Scaffolding etc. all complete at all levels as per specifications and as directed by the Engineer-in-charge. |
| 15 | Supplying and fixing one number tube light and one number exhust fan in suitability of site with proper wiring all complete as directed by Engineer in charge. |
| 16 | Providing and fixing in position anodised aluminium fixed window /ventilators /doors with hydraulic door closer using extruded sections of approved manufacturers viz. Jindal/Indal, frames, mullions, shutters fabrication & fixing etc. as per relevant I.S. specifications,aluminium frame work of approved manufacturers for partition wall using prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS 12823 grade i type ii,in paneling fixed in aluminium partition frames with stainless steel screws etc including 4mm thick approved quality transperenent glass of modiguard or equivalent make with PVC lining/rubber gasketting to ensure air tightness. complete as per architectural drawings and direction of Engineer-in-charge. |
| 17 | Providing, laying and fixing 110mm dia nominal bore PVC rain water pipe of approved quality including jointing with seal ring with inlet assembly, shoe and jalli cover at inlet etc. including all other specials as required and fixing with necessary MS holder over wooden packing to wall or concrete surface and filling the joints with cm 1:2, curing, scaffolding etc. all complete up to a height of 18m all as per drawings, specifications and as directed by the Engineer-in-charge.. |
| 18 | Providing and fixing of PTMT Liquid Soap Container of 400 ml capacity including all necessary fittings & fixtures, screws/nuts,etc complete as per direction of Engineer-in-charge. |
| 19 | Providing and fixing of Hand drier of approved brand like Havels/Johnson/Jaguar, etc including all necessary fittings and fixtures complete as directed by Engineer-in-charge. |
| 20 | Providing and fixing of 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. |
| 21 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. |
| 22 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564,embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. specifications and as directed by the Engineer-in-charge.. |
| 23 | Providing and fixing 600x450 mm beveled edge mirror of superior glass ( of approved quality ) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per the direction of Engineer-in-charge. |
| 24 | Providing and applying 15mm thick plaster in cement mortar 1:6 ( 1 cement: 6 fine sand ) proportion over brick masonry walls and concrete surfaces at all heights,including racking of joints,hacking of concrete surfaces, curing,scaffolding,providing grooves etc. all complete as per drawings,specifications and as directed by the Engineer-in-charge. |
| 25 | Providing and laying Brick work with non modular fly ash lime bricks (FALG Bricks) conforming to IS:12894, class designation 10 average compressive strength in super structure in cement mortar 1:6 including cost of scaffolding, raking of joints, curing etc. all complete at all levels as per drawing, specifications and as directed by the Engineer-in-charge.. |
| 26 | Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete.1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) as required and as directed by the Engineer-in-charge. |
| 27 | Providing and laying polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 09, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender