Tender For Provn Of Bathroom And Certain Other Minor And Revenue Works Under Age B/R-I And Age E/M Of Ge (South) Delhi Cantt-10.
Tender Value
40.50 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
15 days left
EMD
81000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Bathroom And Certain Other Minor And Revenue Works Under Age B/R-I And Age E/M Of Ge (South) Delhi Cantt-10.
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed. |
| 2 | Excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out any kind of soil and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and as directed. |
| 3 | Removing excavated material (soil) not exceeding 50 meter and depositing where directed at a level not exc. 1.5 meter above the starting point complete all as specified and as directed. |
| 4 | Returning, filling in , including spreading, leveling , watering and well ramming in layers not exc. 25 cm (soft / loose soil ) complete all as specified and as directed. |
| 5 | M&L for Hard core of broken stone or boulders of gauge exceeding 63 mm but not exceeding 100 mm deposited spread and levelled in layers not exceeding 15 cm thick watered and rolled / rammed to a true surface complete all as specified and as directed. |
| 6 | M&L for Cement concrete 1:4:8 Type D-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 7 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shaperequired, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, conforming to grade Fe-500D, complete all as specified and as directed. |
| 8 | All as per srl item No 7.00 here-in-before but 8 mm dia as in stirrups. |
| 9 | M & L for steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter finsihed fairs surfaces of concerete complete all as specified and as directed. |
| 10 | M&L for Reinforced cement concrete M-25 (Design Mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and as directed. |
| 11 | M & L for steel formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc alo splays between floors and beamsfor rough finished surfaces of concrete, complete all as specified & directed |
| 12 | M&L for reinforcement cement concrete M-25 (Design Mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span concrete etc complete all as specified and as directed. |
| 13 | M & L for steel formwork to sides of pillars, posts, structs, columns etc. for rough finished surfaces of concrete, complete all as specified & directed. |
| 14 | M&L for reinforced cement concrete M-25 (Design Mix) as in columns and pillars etc complete all as specified and as directed. |
| 15 | M&L for steel from work to soffits of suspended slabs such as roof slabs, floor slabs, landing & similar work not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces, complete all as specified and as directed. |
| 16 | M&L for reinforced cement concrete M-25 (Design Mix) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed. |
| 17 | M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specifie and as directed. |
| 18 | M & L for brickwork with fly Ash bricks, straight or curved on plan exc. 6m in mean radius, built in cement mortar 1 :4 in half brick wall, complete all as specifie and as directed. |
| 19 | M&L for rendeing 15 mm thick with ready mix plaster on brick/stone masonary surface other then fair faces surfaces finished even and smooth without using extra cement including scaffolding arrangement to carry out the work complete all as specified & directed. |
| 20 | M&L for rendeing 10 mm thick with rady mix plaster on fair faces of brick work finished even and smooth without using extra cement complete all as specified & directed. |
| 21 | Supply only intergal water proofing compound complete all as specified and as directed. |
| 22 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper using painting roller over one coat of chalk whitening complete all as specified and directed by engineer in charge. |
| 23 | M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resisitant primer complete all as specified and as directed. |
| 24 | S&F of PVC Connecton pipe (PVC) 15 mm dia and 600mm long complete all as specified and as directed. |
| 25 | Supplying and fixing 25 mm outer dia CPVC pipes SDR 11 & CPVC plain and brass threaded (Brass threaded elbow, Tee, Male/Female adaptor, ball valve etc) SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and as directed. |
| 26 | Supplying and fixing 20 mm outer dia CPVC pipes SDR 11 & CPVC plain and brass threaded (Brass threaded elbow, Tee, Male/Female adaptor, ball valve etc) SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and as directed. |
| 27 | S&F of bib taps 15mm dia fancy type brass Chromium Plated with long body screwed down for iron pipe and fixed complete all as specified and as directed. |
| 28 | S&F of PVC(SWR) multi floor trap with grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and as directed. |
| 29 | S & F of Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified. |
| 30 | S&F 15 mm bore brass chromium plated angle/stop valve fancy type cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle at ends including necessary extention piece complete all as specified and as directed. |
| 31 | S&F 20 mm bore brass chromium plated stop valve fancy type cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle at ends including necessary extention piece complete all as specified and as directed. |
| 32 | S&F of vitreous China, wash hand basin, flat back white of size 550mmx400mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, PVC 32mm dia waste pipe including cutting for and pinning in ends of brackets or erecting stand, complete all as specified. |
| 33 | S&F of PVC valveless, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long, complete all as specified.. |
| 34 | S&F of Vitreous China wash down water closet (Pedestal pattern), white with ‘P’ or ‘S’ trap, fixing with screws of suitable size, plastic seat cover, white closed pattern with flat bottom and cover, complete all as specified, making connections to trap and to flush pipe, fixing flushing cistern etc. and making good to floors, complete all as specified.. |
| 35 | S&F stainless steel AISI 304 toilet paper holder with flat recessed type complete all as specified and as directed. |
| 36 | S&F of 600x450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws & cup washers including aluminum beading allround the mirror, complete all as specified and as directed. |
| 37 | S&F of 25 mm bore gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 38 | M&L for Non Skid coloured ceramic tiles 8 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and as directed. |
| 39 | M&L for 75mm thick cement concrete type D-2 1:4:8 using 40mm graded aggregate complete all as specified and as directed. |
| 40 | M&L for Glazed Ceramic coloured tiles in vertical surface 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10 mm thick backing coat of cement mortar 1:4, complete all as specified and as directed. |
| 41 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed. |
| 42 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 43 | M&L for reinforced cement concrete (Nominal mix) 1:2:4 (20 mm graded crushed stone aggregate) as lintels upto 1.5 m clear span, cills, steps, sesmic and and the like complete all as specified and as directed. |
| 44 | S&F of Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width ofaperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 45 | S&F of 150 mm handles, cast type, anodised complete all as specified and as directed. |
| 46 | S&F of 200 mm aluminium, anodised , barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 47 | S&F of butt hinges 100 mm type B-21 extruded section and fixed complete all as specified and as directed. |
| 48 | S&F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 49 | S&F of 110mm bore PVC (SWR) bends of any radius, complete all as specified and as directed. |
| 50 | S&F of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 51 | S&F of 75mm bore PVC (SWR) bends of any radius, complete all as specified and as directed. |
| 52 | S&F of rotational moulded HDPE water storage tanks 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut, tank nipple as required complete, screwd for iron pipe or brass ferrule size 25 mm bore including dismantling water tanks of capacity not dexceeding 500 litres complete all as specified and as directed. |
| 53 | S&F of 605x605 mm Galvanised powder coated snap grid frame works for false ceiling including fixing of arrangement including hanging.The snap grid shall be consist of aluminium main/cross tee of size 24mmx32mmx 0.30mm and 15mm x32mmx0.30mm. The snap grid frame shall fixed to ceiling with supporting hangers consisting of 4 mm dia GI wire with necessary bolts and nuts and washers including 12mm thick gypsum board false ceiling complete all as specified and as directed. |
| 54 | S&F of Health faucet (ABS Body) mild steelchromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 55 | S&F of sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 56 | M&L forcement concrete (1:2:4),type B-0 using 12.5mm graded aggregate cement concrete in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed. |
| 57 | M&L 15mm thick cement mortar in (1:4) with water proofing on roof for water proofing complete all as specified and as directed. |
| 58 | M&L for roof treatment in following stages, complete all as specified and as directed :-(i) Preparation of concrete surfaces by wire brush and cleaned top surfaces of cement concrete . (ii) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 Kg per sqm including cleaning surfaces(iii) APP polymeric water proofing membrane minimum 3 mm thick and wieghing not less than 3.5 Kg per Sqm, black finish reinforced with non woven polyester matt with a thermo fasable finish laid over bitumen primer @ 0.5Kg/Sqm by torching application with a propane or a butrane gas torch with an overlap of 100 mm at the sides and 150mm at the ends, as per manufacturers instructiions incl preparation of surface and applying two coats of aluminium paint over membrane.Note: Manufacturer as approved by GE. |
| 59 | supply only Liquid water proofing compound complete all as specified and as directed. |
| 60 | S&F of anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 61 | S&F of powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed. |
| 62 | S&F of 4 mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 63 | Supply, fabrication & installation of box-type modular kitchen cabinets (below/above counter) up to 600 mm depth (or as per actual size at site) made of 18 mm thick HDHMR pre-laminated waterproof & termite resistant board for top, bottom, back, partitions, drawers, shelf etc. Shutters & exposed surfaces made of 18 mm thick HDHMR laminated with 1 mm thick acrylic high gloss sheet on one side and 0.8 mm balancing laminate on other side, factory pressed. Edges finished with PVC edge banding tape applied by edge bending machine etc including auto closing spring loaded hinges(hydraulic type), magnetic catchers, SS handles stainless, steel soft closing heavy type telescopic drawers channel etc complete all as per approved shop drawing and as directed. Note :- i) Fittings & fixtures shall be deemed to be included in rate quoted by the tenderer.ii) The measurement for payment shall be based on the superficial area of the modular kitchen cabinets. |
| 64 | S & F Modular Cabinet Kitchen accessories of Stainless Steel grade-304, 6mm thick rod including :-(i) Perforated Cutlery basket, (ii) Grain trolley, (iii) Thali basket, (iv) Cup & saucer basket, (v) Glass basket, (vi) Plate basket, (vii) Premium magic corner (viii) Oil Pull out Tray ( Triple basket layer) , (ix) Dust bin, (x) Cleaning kit rack of size as per site requirement all specified and directed. |
| 65 | S&F dressing table complete with 5.5 mm thick bevelled-edge mirror of selected quality glass, size 1.90 m × 0.40 m, mounted on 25 mm thick second-class hardwood backing, finished in brown and forestry white, overall size 1.92 m high × 0.50 m wide, securely fixed with 4 Nos. suitable plugs, chromium-plated brass screws and cup washers, including drawers and shelf fabricated from 18mm thick prelaminated HDHMR board, comprising a minimum of 7 Nos. storage units in the form of drawers/shelfs, complete all as specified and directed. |
| 66 | Surface dressing not exceeding 15 cm deep in any type of soil complete all as specified and as directed. |
| 67 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified and as directed. |
| 68 | S&F of 25 mm thick factory made rubber moulded glossy finished cement concrete tiles size 300X300 mm with approveed colour, design & pattern as in footpath, park lawns, drive ways etc laid in required colour & pattern over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. |
| 69 | Cutting holes in brick walls in built in cement mortar or cement lime mortar and stone walls not exceeding 150 sqcm including making good to original surface complete alll as specified and directed. |
| 70 | M & L for cutting chases ,pinning in , making good to facings where required and pointing in cement mortar 1:3 to ends or edges or landings, steps, cills, sunshades,shelves,lintel,etc and cutting in chases for concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth complete all as specified and as directed. |
| 71 | M&L for steel work in tubular trusses including special shaped washer, cleats etc complete using ERW or induction butt welded tubes confirming to IS: 1161-1979 grade st - 240 complete all as specified and as directed. |
| 72 | S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete alll as specified and as directed. |
| 73 | M&L for cement concrete type B-1 (1:2:4) (20 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 74 | S&F mild steel rolled sections as roof purlins crane of angle or other section gusset plates, flat iron rails braces etc, drilled for fixing and other covering etc prepared for hanging and sliding with and including either hooks and hinges and other covering running rails etc. Confirming (Fe-410- W(Gde- E-250) quality- B complete all as specified and as directed. |
| 75 | S&F 2 mm thick Fibre glass reinforced translucent corrugated/plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed. |
| 76 | M&L for preparation of new steel surface of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of zinc chrome red oxide complete all as specified and as directed. |
| 77 | S&F 12 to 15mm thick heavy duty parking tiles of any colour, any pattern any desing as approved by GE, area of each tile exceeding 0.04 Sqm but not exceeding 0.36 Sqm as in floors/landing/steps/riser/parking/ footpath etc and over & including 15 mm thick screed bed or bedding/ rendering layer in cement mortar 1:4, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles including dismantling of existing tiles of any description complete all as specified and directed. |
| 78 | S & F 15 mm bore GI tube medium grade with all fittings and fixed complete to walls and ceiling or laid floors complete all as specified and directed. |
| 79 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified and as directed. |
| 80 | Material & labour for brick work with sub class B old size burnt bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specifie and as directed. |
| 81 | M&L for 15 mm thick rendering in cement mortar 1: 4 on faces of brick work or concrete surfaces, finished fair and even complete all as specifie and as directed. |
| 82 | M&L for concealed point wiring complete with stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through concealed PVC conduit and including replacement of unserviceable pressed steel terminal boxes with Modular steel terminal boxes factory made including white cover modular plate with frame suitable for modular switches, modular sockets, modular fan regulators etc of required size complete including 1.5 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified for One light/Fan/Bell point controlled by one 5 Amp switch one way using cable (1.5 Sq mm for phase and neutral and 1.5 sqmm for earthing) .Note :- The rate is inclusive cutting/chasing and making good disturbed surface with CM 1:3 and same surface finishs with the adjoining surface of disturbed area with OBD/Colour wash/white wash complete. |
| 83 | All as per srl item No 82.00 here-in-before but 5 Amp socket outlet on same board. |
| 84 | All as per srl item No 82.00 here-in-before but One socket outlet 5 Amps on independent board. |
| 85 | All as per srl item No 82.00 here-in-before but for one socket outlet 5/15 Amps on Independent board with cables 2.5 sqmm size for phase and neutral and 2.5 Sqmm for earthing complete. |
| 86 | M&L for point wiring complete, stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable suitable concealed PVC/MS conduit and including replacment of unsv pressed steel terminal boxes of required size and factory painted with stove enameled black paint with top cover 3mm thick plastic/laminated sheet of required colour with screwed and cup washer with all accessories including 1.5 Sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified for One light/Fan/Bell point controlled by one switch 5 Amps one way using cable (1.5 Sqmm for phase and neutral and 1.5 Sqmm for earthing) complete all as specified and as directed.Note:- The rate is inclusive cutting/chasing and making good distrubed surface with CM 1:3 adn same surface finishes with the adjoining surface of distribed area with ODB/colour wash/white wash completed. |
| 87 | S&F switch piano flush type 5/6 Amps SP one way complete all as specified and as directed. |
| 88 | S&F socket outlet 2-in-1, 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and as directed. |
| 89 | S&F switch modular type, 1 way 6A, 1 module complete all as specified and as directed. |
| 90 | S&F Modular Socket, 6A - 2/3 pin 2 module complete all as specified and as directed. |
| 91 | S&F switch modular type 1way 16A, 1module with indicator complete all as specified and as directed. |
| 92 | S&F Socket modular type 6A/16A - 2/3 pin combined complete all as specified and as directed. |
| 93 | S&F of Wall mounted LED Integrated Batten 20 Watt - 4Ft White,CRI 80, Polycarbonate, 120 Lumens per watt,6500K(cool White)4000 K (Natural White), Pf < 0.90 indoor LED batten complete all as specified and as directed. |
| 94 | S&Fof Wall mounted LED Integrated Batten 10 Watt - 2Ft White,CRI 80, Polycarbonate, 120 Lumens per watt,6500K(cool White)4000 K (Natural White), Pf < 0.90 indoor LED batten complete all as specified and as directed. |
| 95 | M&L for opening of hole through out the wall as suitable for exhaust fan of size up to 450 mm sweep and fixing of nut-bolts with 4\\" anchor fastner of suitable size and making good the disturbed surface with existing specification and all as per site requirement complete all as specified and as directed. Note : The rates are inclusive in respect of under this item as above hole opening civil work with MS faster bolt of 8mm dia and 100 mm (minimum) long for fixing of exhaust fan and MS fastner clamps strip 38 mm wide and 5mm thick (min) to hold exhaust fan complete all as specified and as directed. |
| 96 | M&L for opening of hole through across the toilet window glass/wire mesh as suitable for exhaust fan of size up to 250/300 mm sweep and fixing of nut-bolts with 4\\" anchor fastner of suitable size and making good the disturbed surface with existing specification and all as per site requirement complete all as specified and as directed. Note : The rates are inclusive in respect of under this item as above hole opening with MS faster bolt of 8mm dia and 100 mm (minimum) long for fixing of exhaust fan and MS fastner clamps strip 38 mm wide and 5mm thick (min) to hold exhaust fan complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 97 | M&L for opening of hole through across the toilet window glass/wire mesh as suitable for exhaust fan of size up to 250/300 mm sweep and fixing of nut-bolts with 4\\" anchor fastner of suitable size and making good the disturbed surface with existing specification and all as per site requirement complete all as specified and as directed. Note : The rates are inclusive in respect of under this item as above hole opening with MS faster bolt of 8mm dia and 100 mm (minimum) long for fixing of exhaust fan and MS fastner clamps strip 38 mm wide and 5mm thick (min) to hold exhaust fan complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender