Tender For Repair / Maintenance Of Stp Treated Water Pipeline Works At Af Stn Under Ge (Af) Jamnagar No.2
Tender Value
30 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
12 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Stp Treated Water Pipeline Works At Af Stn Under Ge (Af) Jamnagar No.2
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches in soft/loose soil n.exc 1.5 mtr wide & n.exc 1.5mtr in depth and n. exc. 10sqm on plan for laying pipe in trenches and getting out in soft / loose soil complete all as specified and directed. |
| 2 | Returning filling in trenches, spreading, levelling, watering and well ramming in layers n.exc 25cm in hard dense soil complete all as specified and directed. |
| 3 | Removing of surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above starting point complete all as specified and directed. |
| 4 | Material & Labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, mass concrete for road crossing etc., complete all as specified and directed. |
| 5 | Material & Labour for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation, mass concrete for road crossing etc., complete all as specified and directed. |
| 6 | Material & Labour for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in foundation, mass concrete for road crossing etc., complete all as specified and directed. |
| 7 | Supply and lay in trenches ductile iron pipes, socket and Spigot ends, of size150 mm dia bore, ISI marked centrifugally cast (spun) ductile iron pressure pipes conforming to IS:8329/2000 classification K- 9 rating, suitable for push-on-joint (Rubber gasket-D jointing) with cement mortor lining inside the pipes and outside zinc coating with Bituminous finish coat as per IS:8329/2000 including EPDM rubber joints conforming IS: 5382 of 1985 including rubber gasket etc including taking down of old existing HDPE pipe of 150mm dia complete all as specified and directed. Make: Jindal SAW pipes/Electro steel casting Ltd/ Surya Roshni Ltd |
| 8 | Supply and lay in trenches ductile iron pipes, socket and Spigot ends, of size 100 mm dia bore, ISI marked Centrifugally Cast (Spun) Ductile Iron Pressure pipes conforming to IS:8329/2000 classification K- 9 rating, suitable for push-on-joint(Rubber gasket-D jointing) with cement mortor lining inside the pipes and outside zinc coating with Bituminous finish coat as per IS:8329/2000 including EPDM rubber joints conforming IS: 5382 of 1985 including rubber gasket etc including taking down of old existing HDPE pipe of 100mm dia complete all as specified and directed. Make: Jindal SAW pipes/Electro steel casting Ltd/ Surya Roshni Ltd |
| 9 | S&F in repair DI fitting for DI spigot and socketed / flanged ends pipes like bends (any type, radius and angle) increasing, decreasing or double socketed / flanged tee pieces single branch 'Y' junction double branch, cross collars caps and plugs, connecting pieces one end flanged and other end socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth suitable for up to 250 mm bore pipe complete all as specified.Note :- (i) The weight of the fitting for the purpose of payment shall be actual weight of the fitting or as specified in IS code which ever is less IS :9523 (ii) Jointing materials such as run lead joint, rubber tyton joint shall be measured & paid for separately. |
| 10 | Supply and fix in repair air release valve with single air outlets, conforming to IS 14845 of size 150mm dia bore fixing up in cast iron water supply mains of size 150mm dia |
| 11 | Supply and fix in repair high pressure, heavy duty cast iron non return valve/ check valve of following sizes, conforming to BS 1868, Class 600, suitable to hydrostatic test pressure for body 156 kg/sq cm & for seat 115 kg/sq cm, both ends flanged in existing line, after removal of old unserviceable non return valve without damaging to existing pipe line complete all as specified and directed for the following .Make Kirloskar / Kartar/ Zoloto. Note : Suitable size MS flanges for existing pipe line, Joints and jointing materials shall be included under this item. |
| 12 | 150mm dia |
| 13 | 100mm dia |
| 14 | Supply and fix in repair MS pipe medium grade of size 80mm dia, thickness shall not be less than 4.05mm for suction line of pump, header of pumps and connecting to exisiting pipe line including cutting, fabrication work and including weliding work fixing with exisiting pipe line like suction pipe of all motor pumps with all fittings complete all as specified and directed. |
| 15 | Supply and fix in repair MS pipe medium grade of size 100mm dia, thickness shall not be less than 4.05mm for suction line of pump, header of pumps and connecting to exisiting pipe line including cutting, fabrication work and including weliding work fixing with exisiting pipe line like suction pipe of all motor pumps with all fittings complete all as specified and directed. |
| 16 | Supply and fix in repair MS pipe medium grade of size 150mm dia, thickness shall not be less than 4.05mm for suction line of pump, header of pumps and connecting to exisiting pipe line including cutting, fabrication work and including weliding work fixing with exisiting pipe line like suction pipe of all motor pumps with all fittings complete all as specified and directed. |
| 17 | Supply and install Dosing system (Dual tank Model No- FTPS AQUA 1005 & 1006) Mechancally actuated, variable eccentric type motor dosing system. High flow rate of 0-30 LPH & High pressure of 10kg/cm2 . Flanged vertically Mounted with TEFC induction Motor Directly coupled.Motor capacity 0.25HP, 1440 RPM. Including accessories injection check valve (1/2\\" NPT-M \\"Y\\" strainer 1/2\\" BSP-F), Suction Strainer (Y Type PP/PVC) and Discharge tubingh 3Mtrs. Accessories must include the following:- (A) Preparation tank Model No AQUA1005 of net capacity 170ltrs. FRP dosing tank dia 650xnet Height 375 + conical 300mm. gross Height with stand 1000mm consisting of water inlet line, outlet with \\"Y\\" stariner. Drain overflow conical bottom for sludge deposition, Pot hole with cover, Level gauge Agitator 120Watt 960RPM single phase flange mounted motor with plastic shaft and impeller (B) Service Tank Model NOAQUA1006 of net capacity 100ltrs of FRP dosing tank Top dia 540mm x Bottom dia 480mm x Height 575mm consisting of water inlet line, Dosing pump inlet arrangement, Drain Ocverflow level gauge , inspection port, Agittator 120Watt 960RPM single phase flange mountred motor with plastic shaft and impeller. Provision of mounting lid .Pump fitted with mounted on heavy duty MS fabricatyed frame and painted with anticorrosive paint Make- Aquafit of Aquajio Technoliogies and MAIC India |
| 18 | S&F in repairs for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint etc complete all as specified and directed. |
| 19 | Supply and fix in repair display coloured layout diagram of Water supply / STP instllation / openwell / borewell / motor detials showing Sump capacity, motors, pipe lines of all types with proper sizes, legends and direction of flow on acrylic sheet fixing to be complete AOR of GE (AF) Jamanagr No-02 incl nut bolt washer complete. The design, orientation of letters and size of display board and sample shall be decided by Engr-in-charge. Note :- Fixing and grouting PCC work for display Board Measured and paid seperately Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender