Tender For Repairs To Aluminium Related Works & Wooden Joinery, Rolling Shutters At Sdi And Aste Under Ge (Af) Marathahalli Bangalore
Tender Value
28.98 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
18 days left
EMD
58000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Aluminium Related Works & Wooden Joinery, Rolling Shutters At Sdi And Aste Under Ge (Af) Marathahalli Bangalore
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each all as specified and directed. |
| 2 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used and edges will be painted to match with printed sheet including reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 3 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strips of 20mm width stuck inside with solven cement for styles and plain colour PVC sheets for top rain lock rail and bottom rail on either side and as gap insert for top rail and bottom rails, paneling ofwood grain printed PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet bedding and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete. |
| 4 | S&F in mild steel butt hinges of 75 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed |
| 5 | S&F 125mm long Aluminium anodised barrel tower bolts of extruded section fixed to PVC door with screws complete all as specified. |
| 6 | S&F 125 mm long Aluminium anodised handles extruded section fixed to PVC door with screws complete all as specified. |
| 7 | Taking Down shutters of any description exc 1 Sqm but n.exc 2 Sqm each etc. complete all as specified. |
| 8 | S&F 2nd class HW 40mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I)kiln seasoned and chemically pressure treated. |
| 9 | S&F 2nd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sach bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed. |
| 10 | S&F factory made 30mm thick flush shutters solid core construction with block board core and plywood face panels. |
| 11 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed . |
| 12 | S&F in repair Helical door spring 300mm, ordinary rat tail rod pattern springs, including roller and roller plate fixed to iron chowkats with weilding complete all as specified and directed. |
| 13 | S&F 300mm long Aluminium alloy, Anodised, sliding door bolt with haps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. |
| 14 | S&F Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed. |
| 15 | S&F 150mm long Aluminium handles, cast type anodised. |
| 16 | S&F stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed. |
| 17 | Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (Without taking off shutters from the frames). |
| 18 | Taking down shutters of any description of size not exc 1sqm each complete all as specified. |
| 19 | S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 20 | S&F Powder Coated aluminium door shutters of any colour (minimum thickness of powder coating 50 micron) aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.Note: Glass will be measured and paid seperately. |
| 21 | S & F Powder coated anodised alluminium window and ventilator shutters of any colour sliding type without sash bar, aluminium sections weighing 0.55 Kg/m including joining cleats glazing clips, rubber packing , anodised aluminium snap beading, screws etc. complete all as specified and as directed by Engr-in-Charge. |
| 22 | Provision of 5.5 mm thick tinted glass exc 0.5 sqm of each pane of superior quality fixed to alluminium frame works with rubber beadings Complete all as specified and as directed by Engr-in-Charge. |
| 23 | S&F for 12mm thick prelaminated particle board, fixed to aluminium framework, complete all as directed by Engr-in-Charge. |
| 24 | S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium beading, wire staples complete all as specified and directed. |
| 25 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/ stainless steel screws@ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement and direction of Engineer-in-charge. |
| 26 | Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers Complete all as specified and as directed by Engr-in-Charge. |
| 27 | S&F Aluminium (Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as directed by Engr-in-Charge. |
| 28 | M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc. complete. |
| 29 | S&F Floor door stopper 150mm length of cover plate aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in doors , complete all as specified and directed. |
| 30 | Taking down Wooden shutters of any description exc 1.00 sqm and n.exc 2.00 sqm each and refixing the same opening without damaging the door including cutting the door bottom for adjusting of height if required, etc complete all as specified and directed by Engineer-in-Charge. |
| 31 | Taking down shutter of aluminium door shutters exc 1.00 sqm and n exc 2.00 sqm each and refixing the same opening without damaging the door by adjusting the bottom of door adjusting of height if required, including material and labour for joining cleats glazing clips, rubber neoprene packing , handle, hinges, anodised aluminium snap, mortice lock, beading screws, bearings etc. complete all as specified and as directed by Engr-in-Charge.etc |
| 32 | S&F in repair of Laths/Locking plate of 1mm in rolling shutters including removal of existing broken laths in rolling shutters with opening of bottom locking plate and number of existing laths as and where to repair the borken laths etc. complete all as specified and as directed by Engr-in-Charge.etc. |
| 33 | Easing of exising rolling shutter and its machanisium up to its area up to 10 sqm i.e ball baring with or without removing the rolling shutter and re fix in the existing location after making operational in all purpose. Change of cost of sprting/anti choring rod/chain wheel/hand chain/Haspend staple or any other fitting required to make the operational rolling shutter is included in the coated rate. No extra shall be admissiable on that account. etc. complete all as specified and as directed by Engr-in-Charge.etc. Note : Change of laths and bottom locking plates will paid separately. |
| 34 | Easing of exising rolling shutter and its machanisium up to its area from 10 to 20 sqm i.e gare box, ball baring with or without removing the rolling shutter and re fix in the existing location after making operational in all purpose. Change of cost of sprting/anti choring rod/chain wheel/hand chain/Haspend staple or any other fitting required to make the operational rolling shutter is included in the coated rate. No extra shall be admissiable on that account. etc. complete all as specified and as directed by Engr-in-Charge.etc. Note : Change of laths and bottom locking plates will paid separately. |
| 35 | S & F in repairs aluminium handles 150mm size cast type anodised , complete all as directed by Engr-in-Charge. |
| 36 | S & F in repairs floor door stopper 150mm length of cover plate aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor , complete all as specified and directed. |
| 37 | S&F in repairs , Aluminium (Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as directed by Engr-in-Charge. |
| 38 | M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including takingdown existing one etc complete all as specified and as directed by Engr-in-Charge. |
| 39 | S&F in repairs Aluminium Mortice lock of 4 levers in vertical type of size 100 mm complete all as specified and as directed by Engr-in-Charge. |
| 40 | S&F in repairs Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed by Engr-in-Charge. |
| 41 | S&F in repairs Ball bearing for rolling shutters complete all as specified and as directed by Engr-in-Charge. |
| 42 | Hacking out old broken glass from metal frame of any thickness incl punching or drilling out old glazing pins/springs clips and providing and fixing new ones complete all as specified and as directed |
| 43 | S&F sheet glass ordinary quality 4mm thick in squares n.exc 0.50sqm in each pane for metal /wooden frames, complete all as directed by Engr-in-Charge. |
| 44 | S&F sheet glass ordinary quality 4mm thick in squares exc 0.50sqm in each pane for metal /wooden frames, complete all as directed by Engr-in-Charge. |
| 45 | S&F figured glass, pinhead type 4mm thick in squares n.exc 0.50sqm in each pane for metal /wooden frames , complete all as directed by Engr-in-Charge. |
| 46 | Dismantling of steel collapsible gate of any description complete all as specified. |
| 47 | S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete |
| 48 | Taking Down rolling shutters of any description and any size each etc. complete all as specified. |
| 49 | S&F 1.25 mm Steel rolling shutters with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, gear operated type with chain wheel and hand chain all as specified and directed. |
| 50 | S&F Ball bearings for rolling shutters complete all as specified and directed. |
| 51 | S&F Safety Lever Locks mild steel with 4 levers for rolling shutters, complete all as specified and directed by EIC. |
| 52 | Dismantling boarding, any description, fixed in any position with screws. |
| 53 | M&L solid PVC Wall/ceiling Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing. |
| 54 | M&L 5mm thick PVC sheet fillet of width 35mm for wall/ceiling paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 55 | Preparation of new/ painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying two coat of synthetic enamel paint over a coat of Pink primer etc complete all as specified. |
| 56 | Preparation of new/ previously unpainted surface of steel surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying two coat of synthetic enamel paint over a coat of Pink primer etc complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender