Tender For As And As For Officers And Sailors Washrooms At Ground Floor And First Floor Including Roof Treatment And Repairs Of Fins,Facads,Chajjas At Wwt(Vzg) Building P-21 Inside Naval Dockyard And Provision Of Hardstanding With Heavy Duty Interloc
Tender Value
49.95 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
2 days left
EMD
99900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for As And As For Officers And Sailors Washrooms At Ground Floor And First Floor Including Roof Treatment And Repairs Of Fins,Facads,Chajjas At Wwt(Vzg) Building P-21 Inside Naval Dockyard And Provision Of Hardstanding With Heavy Duty Interlocking Paver Block At The Pathway Approaching To Main Lpg Gas Store And Hospital Laundry At Inhs Kalayni ,Visakhapatnam.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-Oct-2026 |
| 2 | 21-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for and removing debries and rubbish to a distance outside MD land exceeding 1.5 km but n.exe 5.00 Km complete all as specifed and directed.complete all as specified and directed. |
| 2 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 3 | Use and waste of form work to soffits of suspended slabs such as roof slabs, n. exc. 20cm thick (horizontal or sloping for fair finished concrete surface complete all as specified and directed. |
| 4 | M&L for RCC M-30 (Design mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and the like etc complete all as specified and directed. |
| 5 | Use and waste of formwork to flat surfaces of chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed by Engineer-in-Charge. |
| 6 | M&L for RCC M-30 (Design Mix) using 20mm graded stone aggregate as in chajjas complete all as specified and directed. |
| 7 | Use and waste of formwork to Formwork to fins, louvers, fascia complete all as specified and directed. |
| 8 | M & L RCC- M-30 (Design Mix) in fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like complete all as specified and directed. |
| 9 | M&L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) as in levelling/Base course complete all as specified and directed. |
| 10 | Dismantling floor hearth or wall tiling incl cement morter bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed |
| 11 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 12 | M & L for glazed, coloured, ceramic, tiles of size 450mm x 300mm x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. Note : Rate includes for cutting for offsets etc) complete all as specified and as directed. |
| 13 | Taking up or down 15mm bore, Steel tubing and connections complete all as directed. |
| 14 | Taking up or down 20 mm bore, Steel tubing and connections complete all as directed. |
| 15 | Supply and laying 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 16 | Supply and laying 25mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 17 | S&F in repair 50 mm bore unplasticized PVC (UPVC) pipes of pressure rating 10 kgf/sq. cm including all fittings and fixed to wall ,ceiling and laid on floor including testing complete all as specified and directed. |
| 18 | M & L for 10 mm thick, screed bed as in roof in cement mortar 1:4 finishing the surfaces even and smooth without using extra cement mixed with water proofing compound as per manufacturer's instructions complete all as specified and directed. (Note: WPC shall be measured and paid seperately) |
| 19 | Supply only integral water proofing compound (ISI marked) complete all as specified and directed. |
| 20 | Material and labour for preparation of horizontal or vertical surfaces for water proofing treatment on existing assesible/ non accessible RCC roof surface with the following specification and manufacturings instruction complete all as specified and as directed:-(a) Preparion of the surface from any kind of contamination dirt, tar/bitumen coating etc thoroughly with wire brush and clean the dust by air compressor or by water jetting.(b) Application of one coat of primer diluted with portable water on the completely prepared dry surface with hand brush/ roller.(c) Application of two coat of fibre reinforced liquid elastomeric waterproof roof coating specially formulated with PU-Acrylic Hybrid Polymer meant for a dual effect of waterproofing & heat reduction. |
| 21 | Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed. |
| 22 | Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed. |
| 23 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 24 | S&F 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 25 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed. |
| 26 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. |
| 27 | S & F Powder coated (minimum 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (Note : (i) Thickness of aluminium section shall not be less than 1.5 mm). |
| 28 | S & F125mm stainless steel Butt hinges,medium weight complete all as specified and directed. |
| 29 | S&F 150 mm long, Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 30 | S&F 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 31 | S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 250 mm complete all as specified and directed. |
| 32 | S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 150 mm complete all as specified and directed. |
| 33 | S&F 5.5 mm thick figured sheet glass,glazing with oil putty and glazing clips in metal/ wooden frame with second class hard wood beading/ aluminum beading in frames in squares not exceeding 0.5 Sqm in Each pane fixed glass complete all as specified and directed. |
| 34 | S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed. |
| 35 | Demolition of reinforced Cement Concrete of work and in any position not otherwise specifically provided for( reinforcement cut as reqired to facilitate demolition) complete all as specified and as directed. |
| 36 | M&L for reinforced cement concrete 1:1.5:3 (nominalmix) type A-1 using 20mm graded stone aggregate ,as in sabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 37 | S & F high strength corrosion resistant TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 38 | S&F mild steel TMT bars 5mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 39 | S & F Vitreous China Rimless Single Piece WC with UF soft close slim seat cover, Hinges,fixing Accessories, dual flush fittings, Size: 360x655x765 mm, P Trap - 180 mm and all fittings and fixtures including connection to outgoing drain including making good damaged/disturbed surfaces and taking down old one complete all as specified and directed. Make: Jaquar Cat No. LYS-WHT-38851P180UFSM or equivelant model of make as per list of manufacturer mentioned in PS. |
| 40 | S & F in repar 15 mm bore fancy type chromium plated bib cock with wall flange complete all as specified and directed . Make: Jaquar Cat No.KUP-35037PM or equivelant of make as per List of manufacturer's mentioned in PS. |
| 41 | S & F in repair15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. (Make: Jaquar of make as per list of manufacturer) |
| 42 | S&F in repair two way bib cock with wall flange 15mm bore, chromium plated complete all as specified and directed.Make: CAT No. LYR-38041 of JAQUAR or its equivelant model of make as per list of manufacturer |
| 43 | S&F in repair 15 mm bore fancy type chromium plated angular stop cock with wall flange complete all as specified and directed . Make: Jaquar Cat No. LYR-38053 or equivelant of make as per List of manufacturer's mentioned in PS. |
| 44 | S&F in repair 15 mm bore, Hand Shower (Health Faucet) with 8mm Dia, 1.0 Meter Long Flexible Tube & Wall Hook with all accessories complete all as specified and directed. Make: Jaquar Cat No. ALD-577 or equivelant model of make as per list of manufacturer mentioned in PS. |
| 45 | S&F in repair Toilet paper holder with with flap recessed type, chromium plated fixed to wall with brass screw complete all as specified and directed Make: Jaquar Cat No. ACN-1153S or equivelant of make as per List of manufacturer's mentioned in PS. |
| 46 | S & F 125 mm size, shower rose, brass chromium plated, swival type,Round Shape including Shower Arm 20mm dia. & 300mm Long complete all as specified and directed. Make : Jaquar Cat No.OHS-1789 (Shower), SHA- 479L300S (Shower Arm) or equivelant of make as per list of manufacturer's |
| 47 | S & F in repair fancy type chromium plated towel ring square with round flange complete all as specified and directed . Make: Jaquar Cat No. ACN-1121N or equivelant of make as per List of manufacturer's mentioned in PS. |
| 48 | S&F in repair single towel rail 600mm long,stainless steel complete all as specified and directed. Make: Jaquar Cat No. ACN-1111SM or equivelant of make as per List of manufacturer's |
| 49 | S & F 32mm bore, chromium plated brass Bottle trap for wash hand basin with inlet and outlet, screwed for pipe or connections including necessary apcking union and cap fixed complete all as specified and directed. |
| 50 | S & F counter top vitreous china rectangular wash hand basin of size 615x415x150 mm with all necessary fixing accessories including taking down old one complete all as specified and directed . Make: Jaquar Cat No.JDS-WHT-25943 or equivelant of make as per List of manufacturer's mentioned in PS. |
| 51 | S & F in repair 15 mm bore fancy type chromium plated pillar tap quarter turn for wash hand basin complete all as specified and directed . Make: Jaquar Cat No. VGP-81001 or equivelant of make as per List of manufacturer's mentioned in PS. |
| 52 | S & F in repair 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and directed. |
| 53 | S & F in repair, 32mm dia flexible PVC waste pipe, 900mm long for wash basin/sink/urinal etc complete all as specified and directed. |
| 54 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. Make: Jaquar Cat No. CAN-1171N or equivelant of make as per List of manufacturer's mentioned in PS. |
| 55 | S & F in repair vitreous China urinal with top inlet, with all fixing accessories set, of Size 345x 320x 610 mm, starwhite with grating,CP spreader and union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete complete as specified and directed. Make: Jaquar Cat No. URS-WHT-13257 or equivelant of make as per list of manufacturer's mentioned in PS. |
| 56 | S & F curved shaped urinal partition with 8mm thick frosted glass of size 900 mm x 450 mm including necessary chrome finished accessories complete all as specified and directed Make: Jaquar Cat No. JSE-CHR-810UC450X or equivelant of make as per list of manufacturer as mentioned in PS. |
| 57 | S&F in repair 600 mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 58 | Taking down eaves gutters and rainwater/soil/waste pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed |
| 59 | S & F 110mm bore PVC [SWR] pipes single socketed,pressure rating 6kg/sqcm, type-A grade , in any length with solvent cement/ rubber ring joints, fixed to walls with necessary brackets, clamps complete all as specified and as directed. |
| 60 | S & F 110mm bore PVC [SWR] pipes single socketed, pressure rating 6kg/sqcm, type-A grade, in any length with solvent cement/ rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 61 | S & F 75mm bore PVC [SWR] pipes single socketed, pressure rating 6kg/sqcm, type-A grade, in any length with solvent cement/ rubber ring joints, fixed to walls with necessary brackets, clamps complete all as specified and as directed. |
| 62 | S & F 75mm bore PVC [SWR] pipes single socketed, pressure rating 6kg/sqcm, type-A grade, in any length with solvent cement/ rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 63 | S & F 110 mm bore PVC [SWR] bends of any radius including jointing with solvent cement complete all as specified and as directed. |
| 64 | S & F 110 mm bore PVC [SWR] bends with access door including jointing with solvent cement complete all as specified and as directed. |
| 65 | S & F 75 mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed. |
| 66 | S & F 75 mm bore PVC [SWR] Bends with access door including jointing with solvent cement complete all as specified and as directed. |
| 67 | S & F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal including jointing with solvent cement complete all as specified and as directed. |
| 68 | S & F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door including jointing with solvent cement complete all as specified and as directed. |
| 69 | S & F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal including jointing with solvent cement complete all as specified and as directed. |
| 70 | S & 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door including jointing with solvent cement complete all as specified and as directed. |
| 71 | S & F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with access door including jointing with solvent cement complete all as specified and as directed. |
| 72 | S & F 100mm bore outlet PVC [SWR] Floor trap/ Nahani trap with SS grating including jointing with solvent cement complete all as specified and as directed. |
| 73 | Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc., and disposal off unserviceable materials, debris to out side MD land complete all as specified and as directed. |
| 74 | M&L brick work with sub class 'B' bricks (old size bricks) straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed |
| 75 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key scrubbing down with water etc and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed. |
| 76 | M & L for rendering 15 mm thick in two coats (10mm+5mm each) on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). Please Enable Macros to View BoQ information |
| 77 | M & L for rendering 15 mm thick in two coats (10mm+5mm each) on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 21, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 26, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender