Tender For Repair / Maintenance Of Water Supply Pumping Line, Di / Gi, Control Valves, Motors, Pump Sets And Its Connected Items Under Ge (Af) Jamnagar No.2
Tender Value
45 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
4 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Water Supply Pumping Line, Di / Gi, Control Valves, Motors, Pump Sets And Its Connected Items Under Ge (Af) Jamnagar No.2
BOQ
| Sl. No. | Item Description |
| 1 | M & L for Cleaning of RCC under ground sump of capacity 1.5/2 Lakh Gallon at depth of 3mtr by removing sludge, mud or any other foreign material from the bottom and internal wall surface of tank by means of wire brush and spraying of cleaned fresh water, bailing out accumulated dirty water inside the tank with pump sets, removal of deposited muds and other sediments, washing of internal surface with sufficient quantity of mixture in suitable proportion (0.10 Kg of bleaching powder will be mix in 1.0 litre water), finally applying two coats of lime washing on entire internal surface of walls, allowing applied coat to become dry and wait for confirmation from MES Staff, writing the date of cleaning and capacity of tank with white synthetic enamel paint on black background with synthetic enamel paint complete all as specified and directed for the following locations as under :- |
| 2 | Main Pump House 1.5 Lakh Gallon |
| 3 | Main Pump House 2 Lakh Gallon |
| 4 | M&L for Cleaning of RCC over head water tank of capacity 25,000 Gallons at 18 metre height by removing sludge, mud or any other foreign material from the bottom and internal wall surface of tank by means of wire brush and spraying of cleaned fresh water, bailing out accumulated dirty water inside the tank with pump sets, removal of deposited muds and other sediments, washing of internal surface with sufficient quantity of mixture in suitable proportion (0.10 Kg of bleaching powder will be mix in 1.0 litre water), finally applying two coats of lime washing on entire internal surface of walls,allowing applied coat to become dry and wait for confirmation from MES Staff, writing the date of cleaning and capacity of tank with white synthetic enamel paint on black background with synthetic enamel paint complete all as specified and directed for the following locations as under :- |
| 5 | Premnagar OHT |
| 6 | New Officers OHT |
| 7 | M&L for Cleaning of 500 to 1000 litre capacity HDPE service water tank of and the connected circulating pipes at any position by removing sludge, mud, moss, moulds, efflorescent salts, oil spots etc or any other foreign material from the bottom, cover and internal surfaces by scraping using wire brush, draining out the water from the tank and washing internally with water & bleaching powder (0.10 Kg of bleaching powder will be mix in 1 litre water) and again draining out the water from the tank and writing the date of cleaning with white synthetic enamel paint on black background with synthetic enamel paint complete all as specified and directed. |
| 8 | Excavation in trenches in soft/loose soil n.exc 1.5 mtr wide & n.exc 1.5mtr in depth and n. exc. 10sqm on plan for laying pipe in trenches and getting out in soft / loose soil complete all as specified and directed. |
| 9 | Returning filling in trenches, spreading, levelling, watering and well ramming in layers n.exc 25cm in hard dense soil complete all as specified and directed. |
| 10 | Removing of surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above starting point complete all as specified and directed. |
| 11 | S&F in repair GI tubing medium grade, ISI Marked conforming to IS:1239 Part-I 2004, 20mm bore with and including all fittings such as bends, elbows,tees, short length, socket, union, check nuts, nipples etc. fixed and laid in trenches /floor / under culvert / road crossing etc including testing complete all as specified and directed. |
| 12 | S&F in repair GI tubing medium grade, ISI Marked conforming to IS:1239 Part-I 2004, 25mm bore with and including all fittings such as bends, elbows,tees, short length, socket, union, check nuts, nipples etc. fixed and laid in trenches /floor / under culvert / road crossing etc including testing complete all as specified and directed. |
| 13 | S&F in repair GI tubing medium grade, ISI Marked conforming to IS:1239 Part-I 2004, 40mm bore with and including all fittings such as bends, elbows,tees, short length, socket, union, check nuts, nipples etc. fixed and laid in trenches /floor / under culvert / road crossing etc including testing complete all as specified and directed. |
| 14 | S&F in repair GI tubing medium grade, ISI Marked conforming to IS:1239 Part-I 2004, 50mm bore with and including all fittings such as bends, elbows,tees, short length, socket, union, check nuts, nipples etc. fixed and laid in trenches /floor / under culvert / road crossing etc including testing complete all as specified and directed. |
| 15 | S & F in repair and testing of 150mm bore, DI water mains (including all fittings) with spigot and socket ends and rubber tytan joints Class K-9 in any length laid in trenches complete all as specified and directed. |
| 16 | S & F in repair and testing of 100mm bore, DI water mains (including all fittings) with spigot and socket ends and rubber tytan joints Class K-9 in any length laid in trenches complete all as specified and directed. |
| 17 | Supply and Fix in repair HDPE pipe with material grade PE 100, PN 10.0 confirming to IS-4984 ISI Marked for working pressure 10Kg/sqcm including taking out old unsv damaged pipe complete all as specified and directed. Make: Kisan/Supreme |
| 18 | Outer dia 90mm with minimum wall thickness 6.7mm |
| 19 | Outer dia 110mm with minimum wall thickness 8.1mm |
| 20 | Supply and Fix in repair submersible pump cable, PVC insulated, PVC sheathed, multi stranded copper conductor cable 1100 volts grade and connecting complete including taking out old unsv damaged cable of following sizes:-Make: Finolex / Havells / KEI |
| 21 | 6sqmm 3 core |
| 22 | 10sqmm 3 core |
| 23 | Supply & fix in repair of cast iron Sluice valve PN1.6 as per IS-14846, body, dome, wedge-CI IS:210, rings-bronze IS:318, Spindal-SS IS:6603, Gland Packing greasy jute packing, fasteners-CS, Gasket- Natural rubber, nominal size as under, both ends flanged in existing line, after removal of old unserviceable sluice valve without damaging to existing pipe line complete all as specified and directed for the following . Make: Kirloskar / Kartar/Zoloto. Note : Suitable size flanges for existing pipe line, Joints and jointing materials shall be included under this item. |
| 24 | 80mm dia |
| 25 | 100mm dia |
| 26 | 150mm dia |
| 27 | Supply and fix in repair high pressure, heavy duty cast iron non return valve/ check valve of following sizes, conforming to BS 1868, Class 600, suitable to hydrostatic test pressure for body 156 kg/sq cm & for seat 115 kg/sq cm, both ends flanged in existing line, after removal of old unserviceable non return valve without damaging to existing pipe line complete all as specified and directed for the following .Make Kirloskar / Kartar/ Zoloto. Note : Suitable size MS flanges for existing pipe line, Joints and jointing materials shall be included under this item. |
| 28 | 150mm dia |
| 29 | 100mm dia |
| 30 | S & F in repair Cast iron foot valve confirming to IS:4038 with rubber seating, flanged end complete incl taking out old unsv complete all as specified and directed for the following .Make: Kartar/Venus/Zoloto |
| 31 | 150 mm bore |
| 32 | 100 mm bore |
| 33 | 80 mm bore |
| 34 | Supply and Fix in repair cast iron butter fly valve, with both end flanged type, conforming to IS 13095 with nuts bolts and washers of suitable size and necessary rubber gaskets etc for following sizes complete incl taking out old unsv complete all as specified and directed for the following .Make: Kartar/Venus/Kirloskar/Zoloto |
| 35 | 100 mm bore |
| 36 | 150 mm bore |
| 37 | 200 mm bore |
| 38 | M&L for Dismantling of existing defective/unsv squirrel cage induction motor of capacity 3 to 5 HP, single phase, 415 V, 50 Hz, from the foundation, disconnecting the electric connection, coupling pulley, transportation to work shop, seperating the stator and rotor assembly, cutting down and removing existing burnt out copper windings, cleaning of slots and rewinding of stator with super enamelled solid copper conductor (winding wire) of appropriate gauge and size to match with the existing so as to acheive desired RPM, including varnishing, drying, ovening, overhauling, greasing, providing insualtion and reassembling stator and rotor, connecting coils / winding, fixing in the same position, making necessary electric connection and testing of induction motor complete all as specified and directed. |
| 39 | M&L for Dismantling of existing defective/unsv squirrel cage induction motor of capacity of 7.5 HP, three phase, 415 V, 50 Hz, from the foundation, disconnecting the electric connection, coupling pulley, transportation to work shop, seperating the stator and rotor assembly ,cutting down and removing existing burnt out copper windings, cleaning of slots and rewinding of stator with super enamelled solid copper conductor (winding wire) of appropriate gauge and size to match with the existing so as to acheive desired RPM, including varnishing, drying, ovening, overhauling, greasing, providing insualtion and reassembling stator and rotor, connecting coils/ winding in star and delta mode at the junction box/terminal, fixing in the same position, making necessary electric connection and testing of induction motor complete all as specified and directed. |
| 40 | M&L for Dismantling of existing defective/unsv squirrel cage induction motor of capacity 10.0 HP, three phase, 415 V, 50 Hz, from the foundation, disconnecting the electric connection, coupling pulley, transportation to work shop, seperating the stator and rotor assembly ,cutting down and removing existing burnt out copper windings, cleaning of slots and rewinding of stator with super enamelled solid copper conductor (winding wire) of appropriate gauge and size to match with the existing so as to acheive desired RPM, including varnishing, drying, ovening, overhauling, greasing, providing insualtion and reassembling stator and rotor, connecting coils/ winding in star and delta mode at the junction box/terminal, fixing in the same position, making necessary electric connection and testing of induction motor complete all as specified and directed. |
| 41 | M&L for Dismantling of existing defective/unsv squirrel cage induction motor of capacity of 15 HP, three phase, 415 V, 50 Hz, from the foundation, disconnecting the electric connection, coupling pulley, transportation to work shop, seperating the stator and rotor assembly, cutting down and removing existing burnt out copper windings, cleaning of slots and rewinding of stator with super enamelled solid copper conductor (winding wire) of appropriate gauge and size to match with the existing so as to acheive desired RPM, including varnishing, drying, ovening, overhauling, greasing, providing insualtion and reassembling stator and rotor, connecting coils / winding in star and delta mode at the junction box/terminal, fixing in the same position, making necessary electric connection and testing of induction motor complete all as specified and directed. |
| 42 | M&L for Dismantling of existing defective/unsv squirrel cage induction motor of capacity 20 HP, three phase, 415 V, 50 Hz, from the foundation, disconnecting the electric connection, coupling pulley, transportation to work shop, seperating the stator and rotor assembly, cutting down and removing existing burnt out copper windings, cleaning of slots and rewinding of stator with super enamelled solid copper conductor (winding wire) of appropriate gauge and size to match with the existing so as to acheive desired RPM, including varnishing, drying, ovening, overhauling, greasing, providing insualtion and reassembling stator and rotor, connecting coils/ winding in star and delta mode at the junction box/terminal, fixing in the same position, making necessary electric connection and testing of induction motor complete all as specified and directed. |
| 43 | S&F in repair Bronze gate valve class-1 for 15mm bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778: 1984, complete all as specified and directed. |
| 44 | S&F in repair Bronze gate valve class-1 for 20mm bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778: 1984, complete all as specified and directed. |
| 45 | S&F in repair Bronze gate valve class-1 for 25mm bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778: 1984, complete all as specified and directed. |
| 46 | S&F in repair Bronze gate valve class-1 for 40mm bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778: 1984, complete all as specified and directed. |
| 47 | S&F in repair Bronze gate valve class-1 for 50mm bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778: 1984, complete all as specified and directed. |
| 48 | M&L for cleaning of pump houses, surrounding area by surface excavation upto 10 cm depth incl removing shrubs, grass, miniplants and other unwanted materials and levelling complete in soft/loose soil all as specified and directed. |
| 49 | Supply and fix in repair DOL starter three phase 415v along with short circuit protection connected accessories suitable with for 3 to 5HP motor complete all as specified and directed. |
| 50 | Supply and fix in repair star delta starter three phase 415v along with short circuit protection connected accessories suitable with for 7.5 to 15HP motor complete all as specified and directed. |
| 51 | Material and labour for construction of valve chamber of size 1200x 1200 x 1000 mm deep dimensions (Over all internal dimension) for sluice valve etc. with PCC foundation, PCC block masonry walls, Plastering, PCC Coping, white washing, mild steel chamber cover, painting to chamber cover including Excavation and earth work in any type of soil complete all as specified below:-Valve chamber shall be provided with the following specifications:-(i) Cement concrete for foundation (1:4:8) type D2 using 40mm graded stone aggregate 150 mm thick extended up to 150 mm beyond the outer face of block masonry.(ii) Walls of valve chamber 200 mm thick with precast cement concrete (1:5:8) (using 20mm graded stone aggregate) solid building blocks , setting in CM 1:6 complete. (iii) Internal and exposed surfaces of valve chamber both concrete and block masonry surface shall be plastered with CM (1:4), 15 mm thick finished even and smooth.(iv) 50 mm thick coping in PCC 1:3:6 type C1 over block masonry wall.(v) Entire plastered surfaces shall be treated with 3 coat of white wash.(vi) Chamber cover shall be of 3 mm thick MS sheet with 30 x 30 x 5 mm size angle iron frame with hold fast and locking arrangement. steel surface shall be painted with two coats of synthetic paint of first quality over one coat of red oxide primer including taking down of existing valve chamber of any description and size and removing to store etc all as specified.. |
| 52 | M & L for repairing of crack in 150 / 200 mm bore DI / CI water pipe line by providing mild steel two piece half round clamp fabricated with 60 mm wide & 5 mm thick mild steel flat, bend to shape, including nut bolt, rubber packing, & painting of clamp with anti corrosive paint and including necessary earthwork excavation etc complete all as specified and directed. |
| 53 | M& L for repairing of crack in 100 mm bore DI / CI / GI water pipe line by providing mild steel two piece half round clamp fabricated with 60 mm wide & 5 mm thick mild steel flat bend to shape welding 25 mm size socket, including nut bolt, rubber packing, drilling hole in existing pipe line & painting of clamp with anti corrosive paint complete all as specified and directed. |
| 54 | Supply and fix stainless steel chain, fabricated with SS-304 grade steel fixed to non clogging sewage pump complete all as specified and directed. |
| 55 | De-assembling of electric motor of 7.5 HPof non cloging submersible pump set (Make KSB), cutting and removing the existing burnt winding wire of any gauge, cleaning and making good the slots, rewinding the electric motor with PVC insulated copper wire of existing size / gauge and weight, application of insulating material & varnishing including replacing of ball bearings-02 Nos, moisture seal and re-assembling the motor, commissioning & testing complete all as specified and directed. |
| 56 | S&F in repairs DI fitting for DI spigot and socketed / flanged ends pipes like bends (any type, radius and angle) increasing, decreasing or double socketed / flanged tee pieces single branch 'Y' junction double branch, cross collars caps and plugs, connecting pieces one end flanged and other end socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth suitable for up to 300mm bore pipe complete all as specified and directed.Note :- (i) The weight of the fitting for the purpose of payment shall be actual weight of the fitting or as specified in IS code which ever is less.(ii) Jointing materials such as run lead joint, rubber tyton joint shall be measured & paid for separately. |
| 57 | M & L for preparation of old painted exposed surface of E/M installations tanks including pumps-motors,filter media,filter tanks connecting to borewells, old Pipe line of different size from 40 mm to 400 mm bore suction & delivery line existing metre as per site by removing dust, dirt, and painting with two coats of synthetic enamel paint of existing colour by using the air pressure spray gun machine, writing marked in suction /delivery line to pump sets with white paint complete all as specified and directed. |
| 58 | Material and labour for road cutting through pneumatic tools and compressor machine hardstanding or Bitumin road for any pipe line work coomplete all as specified and directed by Engr in Charge. |
| 59 | Supply and install in repair booster pump 0.5 HP capacity 8 ltr tank capacuty 2700LPM discharge capacity 38mtr mximum head pressure tank type complete all accessories PVC elbow bend socket etc fixing arrangement with power wiring complete all as specified and directed by engr in Charge. |
| 60 | S&F in repairs diffrentiall pressure switch for booster pump Model KP 35 complete alll as specified and directed by Engr in Charge Make- Dunfoss |
| 61 | Relocaction of existing serviceable booster pump capacity existing on ground fitted pump as direction of Engr in Charge including cutting , grinding , Screw, fastener nut and bolts suitablew size PVC pipe bend , elbow, Tee, collars etc and including 15 AMP power socket gang box complete all as specified and directed. |
| 62 | S&F in repair PVC 3 Core copper cable 1.5 Sqmm insulated for fixing of junction box to street light fittings complete all as specified and directed Make- Polycab |
| 63 | Supply and install Openwell submercible motor with pump of Capacity 5 HP three phase , 415 volt , 50 Hz including pump pipe size 80mm 48Mtr head range 830L/Min to 300L/min complete including nut bolt and washers complete all as specifeied and directed by Engr in Charge. Make- Havells Model No MHP3FT057X or equivalant . Note :- Old Motor will be deposited to MES srore yard |
| 64 | Supply and fix in repair outdoor type solar type automatic timer for street light control single phase 230 volt maximum load 3-5 KW 25 Amp rating with hinged LID complete all as specified Make- Swadeep model No Swadeep-66-3KW1P |
| 65 | M&L for tree branches trimming at Main pump house area through manually wiith safety eqpt using hydraulic ladder vehicle and trimmed bracnhces removing from site loading at trcator/truck and unloading at Main STP location asd per direction of Engr in Chrage. Main Pump House AF-I &II |
| 66 | Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil. |
| 67 | Supply and fix in repair MS pipe medium grade of size 80mm dia, thickness shall not be less than 4.05mm for suction line of pump, header of pumps and connecting to exisiting pipe line including cutting, fabrication work and including weliding work fixing with exisiting pipe line like suction pipe of all motor pumps with all fittings complete all as specified and directed. |
| 68 | Supply and fix in repair MS pipe medium grade of size 100mm dia, thickness shall not be less than 4.05mm for suction line of pump, header of pumps and connecting to exisiting pipe line including cutting, fabrication work and including weliding work fixing with exisiting pipe line like suction pipe of all motor pumps with all fittings complete all as specified and directed. |
| 69 | Supply and fix in repair MS pipe medium grade of size 150mm dia, thickness shall not be less than 4.05mm for suction line of pump, header of pumps and connecting to exisiting pipe line including cutting, fabrication work and including weliding work fixing with exisiting pipe line like suction pipe of all motor pumps with all fittings complete all as specified and directed. |
| 70 | S&F in repair ball valve of size 20 mm CPVC type outer diameter including nut bolt washer & rubber packing complete all as specified and directed. |
| 71 | S&F in repair ball valve of size 25 mm CPVC type outer diameter including nut bolt washer & rubber packing complete all as specified and directed. |
| 72 | Material & Labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, mass concrete for road crossing etc., complete all as specified and directed. |
| 73 | Material & Labour for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation, mass concrete for road crossing etc., complete all as specified and directed. |
| 74 | Material & Labour for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in foundation, mass concrete for road crossing etc., complete all as specified and directed. |
| 75 | M & L for preparation of old painted exposed surface of E/M installations OH tanks inlet and, outlet overflow pipes bottom to top and Header assembly including sluice valve/butterfly valves after painting marking of inlet and outlet white colour arrow mark complete all as specified and directed . Location :- Offr OH tanks=02 SMQ OH Tanks =04 SMC Header =01 |
| 76 | S&F in repairs PVC Coated Chain link fencing of OH tank ventilation gumbaj for protection of birds proper fixing of suitable size fencing grill made with angle iron frame and fixing the top of OH tank with safety eqpt complete all as specified and directed by engr in charge.OMQ=02 SMQ =04 AF-II=02 |
| 77 | S&F in repairs cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint. |
| 78 | S&F in repairs cast Iron Air Valves with single air Outlets, conforming to IS 14845 of size 50 mm dia bore and fixing up in Cast Iron Water supply mains of size 80 mm dia |
| 79 | S&F in repairs cast Iron Air Valves with single air Outlets, conforming to IS 14845 of size 50 mm dia bore and fixing up in Cast Iron Water supply mains of size 100 mm dia |
| 80 | S&F in repairs cast Iron Air Valves with single air Outlets, conforming to IS 14845 of size 50 mm dia bore and fixing up in Cast Iron Water supply mains of size 150 mm dia Please Enable Macros to View BoQ information |
| 81 | S&F in repairs cast Iron Air Valves with single air Outlets, conforming to IS 14845 of size 50 mm dia bore and fixing up in Cast Iron Water supply mains of size 150 mm dia Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender