Tender For Repair To Certain Furniture Including Painting/ Polishing To Steel/ Wooden Furniture At Af Stn Bikaner Under Ge Af Nal
Tender Value
10 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
10 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Certain Furniture Including Painting/ Polishing To Steel/ Wooden Furniture At Af Stn Bikaner Under Ge Af Nal
BOQ
| Sl. No. | Item Description |
| 1 | Removing old unserviceable plywood top from charpoy GI pipe and supply and fixing new 12 mm thick plywood BWR grade with 75 mm long x 6 mm dia full threaded nut and bolts with washer in both side. Corners of plywood fixed on charpoy should be rounded off properly complete all as specified. Make of ply: National/KIT Ply/ Archid Ply/ Green Ply (Ref Drg No. FD-220)Note: Middle support rail made of flat iron 45 mm breadth and 5mm thick should be welding both side of long rail of Charpoy GI pipe. |
| 2 | Removal of old unserviceable long rail from existing frame of charpoy of GI pipe , supply and fixing new long rail made out of GI pipe 32mm nominal bore medium grade ISI marked confirmiing to IS 1239 both ends threaded complete all as specified and shown on drg. (Ref Drg No. FD-220) Make of GI pipe: Prakash/ Jindal/ Surya/ Tata |
| 3 | Removal of old unserviceable short rail from existing frame of charpoy GI pipe, supply and fixing new short rail made out of GI pipe 32mm nominal bore medium grade ISI marked confirmiing to IS 1239 both ends threaded complete all as specified and shown on drg. (Ref Drg No. FD-220) Make of GI pipe: Prakash/ Jindal/ Surya/ Tata |
| 4 | Removal of old unserviceable leg from existing frame of charpoy GI pipe and fixing new leg made out of GI pipe 32mm nominal bore medium grade ISI marked confirminh to IS 1239 one end threaded complete all as specified and shown on drg .(Ref Drg No. FD-220) Make of GI pipe: Prakash/ Jindal/ Surya/ Tata |
| 5 | Removal of old unserviceable elbow three way 32mm bore from existing frame of Charpoy GI pipe and supply and fixing new elbow GI three way 32mm bore medium grade confirmiing to IS 1239 all specified and shown on drawing. Make: SUN/ARE/JOLLY/AK/RK ISI marked . (Ref Drg No. FD-220) |
| 6 | Removal of unserviceable check nut from existing frame of charpoy GI pipe and supply and fixing new check nut ISI marked confirmiing to IS 1239 suitable for GI 32mm bore medium grade as approved all specified and shown on drawing. (Ref Drg No. FD-220) |
| 7 | Tightening of charpoy GI frame complete all as per drawing (Ref Drg No. FD-220) |
| 8 | Removal of old unserviceable Middle support rail made of flat iron 45 mm breadth and 5mm thick and supply & fixing new middle support rail should be replace and welding both side of long rail of Charpoy GI pipe. all as specified and shown on drg .(Ref Drg No. FD-220) Make of GI pipe: Prakash/ Jindal/ Surya/ Tata |
| 9 | M & L for Welding 25-50mm long each to broken welding joints of GI charpoy all as per drawing (Ref Drg No. FD-220) |
| 10 | Removing old unserviceable foam cushion from sofa set and supply and fixing new cushion of size 558mmx533mmx 100mm thick having 40 density of Make : Sleep well / Sweet Dream / Kurl-on including covering with tapestry cloth of approved quality costing not less than Rs. 250/- per metre complete including providing Nylon Zip of suitable specifications for opening and closing of cover complete all as specified and directed . Refer Drawing No. FD-281, 373.Note:- Contractor shall bring un-covered Foam cushion to furniture yard of GE (AF) Nal. Covering to the foam cushion with tapesty cloth shall be carried out in the furniture yard of GE (AF) Nal. |
| 11 | Removing old unserviceable Table top of Table Office Officer steel and S&F new Table top made of 18 mm thick Pre-laminated particle board of existing size & shape and edges covered with 4mm thick teak wood beading complete all as shown on drawing, specified and directed. Refer drawing No. FD-84(M), FD-1003 |
| 12 | Removing old unserviceable box incl unsv drawers from Table office Officers and supply and fixing new box with 3 drawers made of 20gauge MS sheet with Brass Lock of Make Godrej/Harrison/Link with duplicate keys in 1 drawer, PVC recessed handles with two coats of synthetic enamel paint over a coat of red oxide primer complete all as shown on drawing FD-84(m), 1003 etc and as directed. |
| 13 | Removing old unserviceable table top of Table Office clerk steel and S&F new table top made of 18 mm thick Prelaminated particle board of existing size & shape and edges covered with 4mm thick teak wood beading complete all as shown on drawing, complete all as specified and directed. Refer drawing No. FD-84(M), FD-1004 |
| 14 | Removing old unserviceable box incl drawers from Table office Clerk Steel and supply and fixing new box with 3 drawers made of 20gauge MS sheet with Brass Lock of Make Godrej/Harrison/Link with duplicate keys in 1 drawer, PVC recessed handles with two coats of synthetic enamel paint over a coat of red oxide primer complete all as shown on drawing FD-84(m), 1004 etc and as directed. |
| 15 | Removing old unserviceable Top of Table 900mmx900mm steel and S&F new Top made of prelaminated particle board of existing size, shape complete all as shown on drawing, specified and directed. Refer drawing No.-FD-1009 |
| 16 | Removing old unserviceable top of Table 900mmx600mm with/without drawer steel and S&F new Top made of prelaminated particle board of existing size & shape and edges covered with 4mm thick teak wood beading complete all as shown on drawing, specified and directed. Refer drawing No. FD-1008, FD-1007 |
| 17 | Removing old unserviceable CP Handle of Almirah Medium steel and S&F new CP Handle (Superior Quality) of existing size, shape complete all as shown on drawing, specified and directed. Refer drawing No. FD-1032 |
| 18 | Removing old unserviceable Locks of Almirah Medium steel and S&F new Lock made of brass 65/75mm having brass lever with keys as required including necessary repair to locking mechanism of existing size, shape complete all as shown on drawing, specified and directed. Refer drawing No. FD-1032 |
| 19 | Removing old unserviceable CP Handle of Almirah Large steel and S&F new CP Handle (Superior Quality) of existing size, shape complete all as shown on drawing, specified and directed. Refer drawing No. FD-1031 |
| 20 | Removing old unserviceable Lock of Almirah Large steel and S&F new Lock made of brass 65/75mm having brass lever with keys as required including necessary repair to locking mechanism of existing size, shape complete all as shown on drawing, specified and directed. Refer drawing No. FD-1031 |
| 21 | Removing old unserviceable handle from Table bed side MAP supply and fixing new handle MS CP with machine screw and washer all as directed and shown on drg FD/E6/MAP/15(R). |
| 22 | Removing old unserviceable Top from Table bed side MAP and supply and fixing new Top made of Prelaminated particle board of existing size & shape and edges covered with 4mm thick teak wood beading complete all as shown on drawing FD/E6/MAP/15(R) and as directed. |
| 23 | Removing old unserviceable small drawer from Table bed side MAP and supply and fixing new drawer made of Prelaminated particle board and Plywood including providing MS CP handle all as shown on drawing FD/E6/MAP/15(R) and as directed. |
| 24 | Removing old unserviceable Big drawer from Table bed side MAP and supply and fixing new drawer made of Prelaminated particle board and Plywood including providing MS CP handle all as shown on drawing FD/E6/MAP/15(R) and as directed. |
| 25 | Removing old unserviceable channel from Table bed side MAP and supply and fixing new Telescopic channel steel of approved quality (Make :Flyrail/Hettich/Haffle) all as shown on drg FD/E6/MAP/15(R) and as directed. |
| 26 | Removing old unserviceable back ply from Table bed side MAP and supply and fixing new plywood 6.00 mm thick including French polishing to all surfaces of ply all as shown on drg FD/E6/MAP/15(R) and as directed. |
| 27 | Removing old unserviceable Top of Table Dining 8 persons and S&F new Top made of prelaminated particle board of existing size, shape and polishing all exposed wooden surfaces of table and with rounded bidding of wooden with 1 coats of French Polish complete all as specified and shown on drg and directed. Refer drawing No. FD-273 |
| 28 | Removing old unserviceable Top of Table Dining 6 persons and S&F new Top made of prelaminated particle board of existing size, shape and polishing all exposed wooden surfaces of table and with rounded bidding of wooden with 1 coats of French Polish complete all as specified and shown on drg and directed. Refer drawing No. FD-273 |
| 29 | Removing old unserviceable top of Peg Table and S&F new Top made of prelaminated particle board of existing size, shape and polishing all exposed wooden surfaces of table and with rounded bidding of wooden with 1 coats of French Polish complete all as specified and shown on drg and directed. Refer drawing No. FD-277 |
| 30 | Removing old unserviceable Drawer of Table Dressing Ladies and S&F new Drawer complete as per drg of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-251 |
| 31 | Removing old unserviceable Looking mirror of Table Dressing Ladies and S&F new Looking mirror complete with frame and back rails complete made of teak wood duly fixed with clamp for hanging of table dressing ladies and polishing all exposed wooden surfaces of table with 1 coats of French Polish complete all as specified and shown on drg and directed. Make of mirrror: Modiguard/swastik/Atul of existing size, shape.Refer drawing No. FD-251 |
| 32 | Removing old unserviceable Drawer of Table Dressing Gents and S&F new Drawer complete as per drg of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-230 |
| 33 | Removing old unserviceable Looking mirror of Table Dressing Gents and S&F new Looking mirror complete with frame teak wood duly fixed with clamp for hanging of table dressing gents and polishing all exposed wooden surfaces of table with 1 coats of French Polish complete all as specified and shown on drg and directed. Refer drawing No. FD-230 |
| 34 | Removing old unserviceable Drawer of Table Dressing Ladies and S&F new Drawer complete as per drg of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD/MAP-II/07 |
| 35 | Removing old unserviceable Looking mirror of Table Dressing Ladies and S&F new Looking mirror complete with frame and back rails complete made of teak wood duly fixed with clamp for hanging of table dressing ladies and polishing all exposed wooden surfaces of table with 1 coats of French Polish complete all as specified and shown on drg and directed. Make of mirrror: Modiguard/swastik/Atul of existing size, shape.Refer drawing No. FD/MAP-II/07 |
| 36 | Removing old unserviceable Looking mirror of Table Dressing Gents and S&F new Looking mirror complete with frame teak wood duly fixed with clamp for hanging of table dressing gents and polishing all exposed wooden surfaces of table with 1 coats of French Polish complete all as specified and shown on drg and directed. Refer drawing No. FD/E6/MAP/16 |
| 37 | Removing old unserviceable Top of Table Centre/Table centre 2 tier and S&F new Top made of prelaminated particle board of existing size, shape and polishing all exposed wooden surfaces of table with 1 coats of French Polish complete all as specified and shown on drg and directed. Refer drawing No. FD-235, FD-274 |
| 38 | Removing old unserviceable Plywood of Bed Hard and S&F new Plywood 12 mm thick of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-246, FD-247 |
| 39 | Removing old unserviceable Head board of Bed Hard and S&F new Head board complete of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-246, FD-247 |
| 40 | Removing old unserviceable Foot board of Bed Hard and S&F new Foot board complete of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-246, FD-247 |
| 41 | M&L for polishing exposed wooden surfaces of Bed Hard with 02 coat of French polish complete all as specified and directed. Refer drawing No. FD-246, FD-247 |
| 42 | Removing Old unserviceable Cane From Chair dinning and Re-canning with new 2mm to 2.5mm wide plastic cane in Godrej pattern and 3.5mm to 4 mm plastic cane for Parameter work Complete all as Specified. Refer drawing No. FD-279 |
| 43 | Removing old unserviceable Front Leg of chair dining / wooden bottom and S&F new leg of shisham wood and properly tightening of seat frame complete all as specified and directed. Refer drawing No. FD-279 (PVC rings will be measured separately). |
| 44 | All as per item No. 43.00 here-in-before but for Rear Leg. |
| 45 | All as per item No. 43.00 here-in-before but for Side rail with caning holes for seat frame. |
| 46 | All as per item No. 43.00 here-in-before but for Front rail with caning holes for seat frame. |
| 47 | All as per item No. 43.00 here-in-before but for rear rail with caning holes for seat frame. |
| 48 | All as per item No. 43.00 here-in-before but for Stiffner. |
| 49 | M&L for applying French polish, 2 coats to new parts replaced as above and 01 coat to remaining old surfaces of chair dining / wooden bottom complete all as specified and directed. Refer drawing No. FD-279 |
| 50 | All as per item 49.00 above but Chair easy (Seat &Back). Refer drawing No. FD-229 |
| 51 | All as per item 49.00 above but Chair Writing. Refer drawing No. FD-280 |
| 52 | M&L for applying French polish, 2 coats to new parts replaced as above and 01 coat to remaining old surfaces of chair Easy complete all as specified and directed. Refer drawing No. FD-229 |
| 53 | M&L for applying French polish, 2 coats to new parts replaced as above and 01 coat to remaining old surfaces of chair Writing complete all as specified and directed. Refer drawing No. FD-280 |
| 54 | Removing old unserviceable cane from Chair Verandah and M&L re-canning seat & back of chair verandah with 1st class plastice cane 4.0 to 5.0 mm wide white colour and applying one coat of synthetic enamel paint white to complete chair before re-canning complete all as specified and directed. Refer drawing No. Refer drawing No. FD-359 |
| 55 | S&F as in repairs Hard PVC shoe superior quality, existing size, shape of chair easy, chair writing, chair dining, table centre, table dining 6 pers, table dining 8 pers, peg tables etc and supply and fixing new PVC ring with screw and washer all as shown on drawing and as directed. |
| 56 | S&F as in repairs Hard PVC shoe superior quality, existing size, shape of Table Office Officer steel, Table office clerks steel, Table 900x900, Table 900x600, Chair Verandah etc. complete all as shown on drawing, specified and directed. Refer drawing No. FD-84(M), FD-1003 |
| 57 | M&L for preparation of old painted surface by scraping, denting, derusting etc and applying one coat of synthetic enamel paint (OG/Dove Grey/AF Blue) by spray painting to Almirah large steel complete internal and external including top and bottom as directed.Refer drawing No. FD-1031 |
| 58 | All as per description of item No. 57.00 here-in-before but Almirah medium steel complete internal and external including top and bottom. Refer drawing No. FD-1032 |
| 59 | All as per description of item No. 57.00 here-in-before but Locker bed side steel complete internal and external including top and bottom. Refer drawing No. FD-1029, FD-257 |
| 60 | All as per description of item No. 57.00 here-in-before but Table office officer steel complete internal and external . Refer drawing No. FD-1003, FD-84(M) |
| 61 | All as per description of item No. 57.00 here-in-before but Table office clerk steel complete internal and external . Refer drawing No. FD-84(M), FD-1004 |
| 62 | All as per description of item No. 57.00 here-in-before but Side rack 3/4 space steel complete including Top & Bottom of each space. Refer drawing No. FD-1023 |
| 63 | All as per description of item No. 57.00 here-in-before but Form with back. Refer drawing No. FD-77(M), FD-1027 |
| 64 | All as per description of item No. 57.00 here-in-before but Form without back. Refer drawing No. FD-77(M), FD-1027 |
| 65 | All as per description of item No. 57.00 here-in-before but Table dining Ors. Refer drawing No. FD-165(M) |
| 66 | All as per description of item No. 57.00 here-in-before but Teapoy verandah. Refer drawing No. FD-255 |
| 67 | All as per description of item No. 57.00 here-in-before but Table 900x900 steel .Refer drawing No. FD-1009 |
| 68 | All as per description of item No. 57.00 here-in-before but Table 900x600 steel with drawer. Refer drawing No. FD-1008 |
| 69 | All as per description of item No. 57.00 here-in-before but Table 900x600 steel without drawer. Refer drawing No. FD-1007 |
| 70 | Removing old unserviceable Top from Teapoy Verandah and supply and fix new Top made of 18mm thick prelaminated particle board of existing size & shape and edges covered with 4mm thick teak wood beading complete all as shown on drawing, specified and directed. Refer drawing No. FD-255(M) |
| 71 | Removing old unserviceable top of Table computer and supply fixing new top made of 18mm thick prelaminated particle board edges covered with PVC beading all as shown on drg FD/E6/MAP/03 & TP and as directed. |
| 72 | Removing old unserviceable shelf from Table computer and supply fixing new shelf made of 18mm thick prelaminated particle board and edges covered with PVC beading all as shown on drg FD/E6/MAP/03 & TP and as directed. |
| 73 | Removing old unserviceable key board tray from Table computer and supply fixing new key board tray made of 18mm thick prelaminated particle board with telescopic channel SS (Make : Flyrail/Hettich/Haffle) exposed edges covered with PVC beading all as shown on drg FD/E6/MAP/03 & TP and as directed. |
| 74 | Removing old unserviceable Drawer from Table computer and supply fixing new drawer made of prelaminated particle board edges covered with PVC beading fixed with telescopic channel SS (Make : Flyrail/Hettich/Haffle) all as shown on drg FD/E6/MAP/03 & TP and as directed. |
| 75 | M&L for preparation of old surfaces by scraping to wooden surface to table dressing ladies. and applying one coat of French polish as directed. Refer drawing No. FD-230 |
| 76 | All as per description of item No. 75.00 here-in-before but Table bed side. Refer drawing No. FD-276 |
| 77 | All as per description of item No. 75.00 here-in-before but Sofa set 5 seater. Refer drawing No. FD-373, FD-281 |
| 78 | All as per description of item No. 75.00 here-in-before but Sofa set 4 seater. Refer drawing No. FD-373, FD-281 |
| 79 | All as per description of item No. 75.00 here-in-before but Peg Table. Refer drawing No. FD-277 |
| 80 | All as per description of item No. 75.00 here-in-before but Teapoy. Refer drawing No. FD-278 |
| 81 | All as per description of item No. 75.00 here-in-before but Table Dining 6/8 persons. Refer drawing No. FD-273, FD-376 |
| 82 | All as per description of item No. 75.00 here-in-before but Table dressing Gents. Refer drawing No. FD-230 |
| 83 | All as per description of item No. 75.00 here-in-before but Table centre/Table centre 2 tier. Refer drawing No. FD-274 |
| 84 | Removing old unserviceable Top of teapoy and S&F new Top made of prelaminated particle board of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-278 M&L for disconnecting from the existing location cutting off worn out aluminium cable end and Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded,galvanized steel strip or wire armoured,electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core including taking out existing cable of any size. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender