Tender For Construction Of P.H. Section Building At Attabira
Tender Value
36.76 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
1 days left
EMD
36760
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of P.H. Section Building At Attabira
BOQ
| Sl. No. | Item Description |
| 1 | Design , Drawing and Construction of RCC Frame structure with brick work wall single stored building for section office as complete as per drawing and specification and direction of Engineer - in - charge |
| 2 | Vitrified Tile Florring |
| 3 | Vitrified Tile Dado - 15% of (flooring) |
| 4 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/ 89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor including cost of all materials,conveyance to worksite,contractor profit & labour cess etc all complete and direction of Engineer-in-charge. |
| 5 | 20mm PVC sch-80 pipes |
| 6 | 25mm PVC sch-80 pipes |
| 7 | Supplying all materials,labour,T&P and laying in trenches (to level or slope)unplastisized PVC pipes confirming tp IS 4984/2016 of the following outside dia for pressure rating PN-6 including jointing with supply of approved solvent cement by non-heat application method/as oer manufactur specification ,provind CC (1:4:8) With 40mm size hard granite metal in the TYPE C-1 standard bedding surrounding or encasing including cost of all materials, conveyance to worksite,contractor profit & labour cess etc all complete and direction of Engineer-in-charge. |
| 8 | 110mm dia PVC circular sewer with conc.bedding & encasing |
| 9 | Supplying & fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge. |
| 10 | 2000 LTR 3 - Layer White Rotational Moulded Cylinderical Vertical water storage tanks (ISI marked) |
| 11 | Construction of Construction of Brick masonry IC of internal Size- 0.75x0.75x0.45m including cost of all materials, conveyance to worksite,contractor profit & labour cess etc all complete and direction of Engineer-in-charge. |
| 12 | Construction of Construction of Gully Trap Chamber.(250x250x675)mm WITH SLAB including cost of all materials, conveyance to worksite,contractor profit & labour cess etc all complete and direction of Engineer-in-charge. |
| 13 | Construction of Construction of Circular soak pit of size size-1.20m dia x 2.00m including cost of all materials, conveyance to worksite,contractor profit & labour cess etc all complete and direction of Engineer-in-charge. |
| 14 | Construction of 20 users Septic tank (internal size 2.30 x 1.10 x(1.80+0.30) including cost of all materials, conveyance to worksite,contractor profit & labour cess etc all complete and direction of Engineer-in-charge. |
| 15 | Construction of Construction of Brick masonry MH chamber of size- 900mmx800mmx450mm including cost of all materials, conveyance to worksite,contractor profit & labour cess etc all complete and direction of Engineer-in-charge. |
| 16 | Supplying all materials, labour, T&P and fixing Ceramic floor tiles using tile 30cm x 30cm or 40cm x 40cm in floor treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to matching shades of the tiles including rubbing and polishing ,contractor profit & labour cess all complete as per direction of Engineer-in-Charge. |
| 17 | Supplying all materials, labour, T&P and fixing Ceramic Glazed tiles in dados,skirtting and risers of steps on 12mm thick bed of cement plaster (1:3) jointed with cement slurry mixed pigment to match the shades of the tiles including rubbing and polishing etc. Complete after providing a base plaster of 12mm thick in cement mortar (1:4) using tiles of size 20cmx20cm or 20cmx30cm including cost of tiles ,conveyance, taxes ,contractor profit & labour cess etc all complete as per the specification and the direction of engineer-in-charge.(tiles of approved shades to be used) |
| 18 | Supplying all materials, labour, T&P and Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. (Seat and cover to be measured and paid for separately) as per specification ,contrator profit & labour cess as per specification and direction of Engineer-in-charge. |
| 19 | Floor Mounted Coupled Closet (With Dual Flush Cistern) Indus (0214/15/66 FM Closet, (P-180/s-110/s-230mm) White(Make-Parryware) |
| 20 | Porcelain E.W.C. with S-trap |
| 21 | Supplying all materials, labour, T&P and Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. as per specification including contrator profit & labour cessand direction of Engineer-in-charge |
| 22 | 10 litr pvc low level cistern with fittings |
| 23 | Supplying all materials, labour, T&P and Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of Engineer-in-charge. ( Porcelain 22\\"x 16\\"(550x400) W.H.B) |
| 24 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge |
| 25 | C.P.revolving shower with arm (overhead) |
| 26 | 15mm dia C.P. Long body bib cock |
| 27 | 15mm dia C.P. short body bib cock |
| 28 | 15mm dia C.P.angular stop cock |
| 29 | 15mm dia C.P concealed stop cock |
| 30 | C.P.grating |
| 31 | 15 mm CP 2 in 1 Bib cock . |
| 32 | 15mm dia CP swan neck Pillar cock with spout` |
| 33 | 15mm x 600mm PVC connection pipe |
| 34 | 32mm x 1150mm long PVC waste pipe |
| 35 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. |
| 36 | 75mm OD P.V.C. SWR S/S Pipe (ISI type-B) |
| 37 | 110mm OD P.V.C. SWR S/S Pipe (ISI type-B) |
| 38 | 110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 39 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 40 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 41 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 42 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 43 | Supplying , all materials , labour , T&P, for Construction of RCC framed Boundary wall size (95 mtr length x 1.80 Mtrs.brick wall heigh above plinth beam) with Fly ash brick filler wall as per the specifications and directions of Engineer-in-charge |
| 44 | Supplying , all materials , labour , T&P, for design & Construction of 2 leaf SS Gate fixed with RCC pillar 2 leaf SS gate (1.8m height x 6.0m) @ 30kg per sqmtr = 324kg & 1 leaf SS gate size ( 1.30mx 1.8mt ht.) 30kg/sqmtr=70.2kg as per the specifications and directions of Engineer-in-charge. |
| 45 | Supplyting , all materials , labour , T&P, for design & Construction of CC Approach Road shall be of 15.00 x 4.00 mtr (width) with Hard soil/Morrum filling – 1.0 Mtr, Crusher Dust-0.1 Mtr with 40 mm size metal filling in sub-base – 0.1 Mtr and rough stone (300mm size) dry packing in berms & aprons including CC (1:3:6) of 100mm thick, CC (M-30) of 150mm thick for CC pavement etc.,.as per the specifications and directions of engineer-in-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender