Tender For Construction Of Drinking Water Kiosk At Chhunavati Chhak Jobra Canal Road Ward No - 40 (Zone-30) Under Watco Section Ranihat, Kataka
Tender Value
7.26 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
9 days left
EMD
7269
Bank guarantee accepted
Document Fee
4720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Drinking Water Kiosk At Chhunavati Chhak Jobra Canal Road Ward No - 40 (Zone-30) Under Watco Section Ranihat, Kataka
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge. |
| 2 | Cutting in disintegrated rock not requiring blasting to be removed by pick axes and crow bars and depositing materials within 50m initial lead and 1.5m initial lift including rough dressing as per direction and specification of the department including stacking the useful materials separately as ordered etc as per direction of Engineer - in - Charge. |
| 3 | Supplying all materials, labour and T&P for filling approved SAND of specified quality under floors, in foundations, plinths, etc. for all depths and heights including cost of sand, royalties, transportation to site for all leads and lifts,including loading, unloading, spreading in layers all complete as per drawings, specifications and direction of Engineer-incharge. |
| 4 | Cement concrete (1:3:6) using 40 mm. size hard granite crusher broken metal including watering and curing including cost, conveyance, royalties and taxes of all materials, labour, T&P etc. complete as directed by Engineer-in charge. |
| 5 | Supplying all materials, labour and T & P for Cement concrete (1:2:4) with 12mm size crusher broken hard granite metal including cost of all labour, materials with all taxes, lead, T & P etc all complete and as per direction of Engineer -in- Charge. |
| 6 | Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentt in cement mortar (1:6) in foundation and plinth |
| 7 | Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentt in cement mortar (1:3) in foundation and plinth |
| 8 | Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentt in cement mortar (1:6) in Superstructure . |
| 9 | Supplying of all materials, labour T&P for RCC (1:11/2:3) with 12mm size hard granite crusher broken chips for RCC work excluding centering ,shuttering with all cost, conveyance, royalty & taxes etc. all complete as per P.W.D. specification and direction of Engineer-in-charge. |
| 10 | Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete. |
| 11 | Foundation |
| 12 | RCC Wall |
| 13 | RCC Column & Beam |
| 14 | Lintel - |
| 15 | Roof Slab & Chajja - |
| 16 | Supplying of all materials, labour T&P for M.S reinforcement for RCC work including cutting, bending, binding, straightening & tying grills and placing in position including cost of binding wire 18 to 20 gauge, M.S. Rod/Tor steel with all cost, conveyance & taxes etc. all complete as per P.W.D. specification & direction of Engineer-in-charge. |
| 17 | Supplying all materials, labour and T&P for Transportation of excavated material & disposing upto 10KM from work site including loading, unloading & stacking, supplying of all labours, tools & plants etc. all complete as per specification and direction of Engineer-in-charge. |
| 18 | Supplying all materials, labour and T&P for Back filling with excavated earth supplying of all labours, tools & plants etc. all complete as per specification and direction of Engineer-in-charge. |
| 19 | Supplying all materials labour & T & P for 12mm. thick cement plaster in cement mortar (1:6) for brick work including curing scafolding etc. complete. |
| 20 | Supplying all materials labour & T & P for 16 mm. thick cement plaster in cement mortar (1:6) for brick work including curing scafolding etc. complete. |
| 21 | Supplying all materials labour & T & P for 12 mm. thick cement plaster in cement mortar (1:4) for Brick wall /RCC surface including curing scafolding etc. complete. |
| 22 | Supplying all materials labour & T & P for 12 mm. thick cement plaster in cement mortar (1:3) with neat cement punning for Brick wall /RCC surface including curing scafolding etc. complete. |
| 23 | Supplying all materials labour & T & P 6 cm projection for 23cm to 25cm wall string course with brick in cement mortar (1:3) and cement plaster (1:4) complete . |
| 24 | 2.5cm AS flooring with CC (1:2:4) with punning using 12 mm crusher broken granites chips. |
| 25 | Fixing Vertified floor tiles of premium grade having thickness 8 mm to 10 mm confirming to IS:13756 of following sizes into dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing & polishing complete excluding cost of marble. |
| 26 | Fixing Tiles to dados skirting & risers on 12mm. thick C.P (1:3) jointed with neat cement slurry with cost of precast tiles.(300mm x 450mm) Gold Category, Digital/Digital High lighter (Premium Quality ) (Make - Khajaria/Somany) |
| 27 | Fixing Vertified industrial floor tiles of premium grade having thickness 8mm to 10 mm confirming to IS:4457 of size 30cm x 30cm in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete. |
| 28 | Supplying of all materials, labour T&P for 2.5cm. thick grading concrete (1:2:2) on roof slab with 6mm. Size on new work crusher broken Granite chips with all cost, conveyance & taxes etc. all complete as per P.W.D. specification & direction of Engineer-in-charge. |
| 29 | Supplying fitting & fixing of MS sheet door madeout of 30x30x6 mm angle, 25x6 mm thick ms flat all complete as per direction of EIC. |
| 30 | Supplying all materials labour T&P for providing M.S. Grill/ Grill gate /Pipe as per following size as per specification.all complete. |
| 31 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32 mm x 32 mm x 2 mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 32 | Finishing plastered surfaces of walls with Berger Synthetic putty wall puty) wall puty and making smooth to receive painting. |
| 33 | Provision for Plastic emulsion painting two coats to walls with over a coat of primer of approved shade on plastered surface to give an even shade in all heights including cost, conveyance, taxes of all materials, cost of all labour, T&P safety belts, sundries etc. as required for the work complete . |
| 34 | Supplying all materials , labour & T & P for Painting of M.S. pipe, Gate, Door & windows with 2 coats of enamel paint over a coat of primer including cost of all labour, materials with all taxes, lead ,T&P etc all complete. |
| 35 | Supplying all materials labour & T & P for fitting & fixing of Stainless steel of 304 grade plate of 3mm thick moulded as per required size & shape with provision for inlet & out let arrangements including cutting , welding polishing etc complete as per specification & direction of Engineer in charge. |
| 36 | Fixing ferrule conforming to IS Specification of the following nominal bore including drilling the water main (Cast Iron/ Ductile Iron pipes or pipes with the metal straps) as per Specification complete. |
| 37 | 15mm dia brass Ferrule including drilling water main |
| 38 | Supplying all materials labour & T & P for fitting & fixing of Glow Sign Board of Size - 3.00 m x 1.50m size made out of 0.50 Gauge MS sheet for back support , 22 gauge MS sheet for side panels of 150mm thick & frame made out of 25mm MS square frame including power supply arrangement with SMPS , LED light 2.5 module duly wiring with 1mm wire including star backlit ECO print for specified logo as decided by the autrhority. |
| 39 | Supplying all materials labour & T & P for fitting & fixing of ECO Vinyle print with gloss lamination pasting on 4mm sunboard including wiring for spot lighting & making cladding with 3mm ACP & 50mm - 25mm aluminium square pipe for branding in proper location & alignment etc. complete. |
| 40 | Supplying all materials labour & T & P for fitting & fixing of ECO Vinyle print with gloss lamination pasting on 4mm sunboard including for branding in proper location & alignment etc. complete. |
| 41 | Supplying all materials ,Labour & T & P for fitting & fixing of 1000 ltr capacity three layer white Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 over RCC staging including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge |
| 42 | Providing and fixing to wall, ceiling and floor / in treanches of UPVC ASTM (Sch-80) pipe& fittings of following nominal bore with clamps; including making good the wall ceiling and floor, all complete (including the cost of materials ) as per the PHE specification and direction of the Engineer-in-charge. |
| 43 | 25mm dia uPVC pipe - |
| 44 | 25mm dia uPVC pipe - |
| 45 | 25 mm PVC Ball Cock with Rod & Ball |
| 46 | 25mm dia uPVC Ball valve UPVC BALL VALVE Sch-80(Sol. Welded with Metal Ball) |
| 47 | Supplying all materials,labour and T&P for cutting grooves in pucca floor and walls for taking G.I. pipes and fittings /P.V.C. pipes and fittings and making good to the damages all complete as per specification. |
| 48 | Supplying, fitting & fixing the following PH fittings and fixtures of standard make & quality as per PH specification. |
| 49 | 15mm dia C.P. push tap |
| 50 | 5\\" C.P. Grating |
| 51 | C.P. Flange big |
| 52 | C.P. extension piece-50mm |
| 53 | Supplying fitting & fixing of the following H.C.I./ P.V.C S.W.R pipe & fittings as per PH specification & direction of EIC. |
| 54 | 110mm dia PVC SWR Pipe (ISI type-A) |
| 55 | 110mm dia PVC SWR Plain Bend |
| 56 | 110mm dia PVC SWR Door Bend |
| 57 | 75mm OD P.V.C. SWR S/S Pipe (ISI type-A) |
| 58 | 75 mm dia PVC SWR Door Bend |
| 59 | 110mm dia PVC SWR Clamp |
| 60 | Recessed / Surface wiring to light point / fan point /Exhaust fan point /call bell point with 1.5 sqmm FR PVC insulated single core multi strand copper conductor of ISI marked with 20 mm dia non-m , MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire -Finolex/L&T/Anchor/Havells/V-Guard) |
| 61 | Group - A |
| 62 | Group - B |
| 63 | 5A Plug Point |
| 64 | Fan Point (Group - A) |
| 65 | Supplying all materials labour & T & P for fitting & fixing of following electrical installations including testing & commissioning etc. complete as per direction of Engineer in Charge. |
| 66 | Step up modular regulator for Fan |
| 67 | 15watt LED Bulb. |
| 68 | 1200mm Ceiling Fan Havells make Fusion |
| 69 | Titanio Pro LED Tube Light -18W |
| 70 | 32A Double Pole MCB. |
| 71 | 63A Double Pole MCB. |
| 72 | 25A Double Pole MCB. |
| 73 | 18 watt Ceiling surface LED light Havels make Cat EDGEPRORDDLR18WLED840S |
| 74 | 6 watt Ceiling panel LED light Havels make Cat EDGEPRORDDLR6WLED840S |
| 75 | 5 Amp switch |
| 76 | 5 Amp socket |
| 77 | Ceiling Rose - |
| 78 | Angle Holder |
| 79 | 63 Amp DP Main switch |
| 80 | 300mm size Modular Board |
| 81 | 150mm x 100mm dia GI Board |
| 82 | 100mm x 100mm dia GI Board |
| 83 | GI Circular Box |
| 84 | 1.5 Sqmm Copper Wire |
| 85 | Supplying fitting & fixing of Digital Pump sensor for single phase motor for loading of Roof top tank as & when required as per parameter fixed by the Deptt.(Preferable AQUA Make) |
| 86 | Supplying all materials, labour and T&P fitting and fixing of unmaned control device (time switch) with analog 3 modules auto timer unit consisting of a M.S. box of required size to accumulate ,Auto timing clock- 1 No,,Trangle off on switch,Auto manual off on switch - 1 no, with necessary internal wiring using copper cable, flexible pipe,clipping ,socketing and jointing materials, arrangement for visuble of clock with locking system suitable to run the lighting system as per the time cycle fixed by the department for illumination purpose . |
| 87 | Supplying and fixing of standard earthing confirming to IS- 3043/1987 including supply and fixing of 38mm/40mm dia heavy duty G.I pipe 3 mtr long confirming to IS specifications. The pipe shall have 12mm dia perforated holes at 15cm intervals center to center up to 2.5mtr height from the bottom, upper end threaed and fitted with 38mm/40mm dia G.I flange with provision of holes for making connections of earth conduit wire including excavation of earth pit of size 0.75mtr x 0.75mtr x 3 mtr. The earth pit shall have an alternate layer of 105 mm charcoal and 50mm salt at 150mm radius around earth electrode up to a depth of 465mm from the bottom and the rest shall be filled with homogenous layer of salt, sand and charcoal toa further depth of 2035mm and balance portion by surplus earth no.8 SWG/4.06mm dia HDBC wire run inside the wall at a depth of 50mm by cutting the wall surface and plaster the cutting portion of wall after laying the wire as earth continuity conductor from main switch to earth electrode, both end of the earth wire should be provide with Al socket duly soldered and fixed by G.I nut and bolts etc. all complete in all respect as per direction of Engineer in charge. |
| 88 | Supply & fitting of Single Phase Horizontal openwell Submersible Pump set capable to discharge 140 LPM to 35 LPM against total head range of 5.0 mtr to 21 mtr along with suitable size of flat copper cable of 3.0 mtr length suitable for lowering inside UGR .(Preferable KSB make or equivalent make Model -MONOSUB R (MR(S) 0.50 ) |
| 89 | 0.50 HP capacity Open well submersible Pump set with Stand by |
| 90 | Supply & laying of Submersible 3 core flat copper cable suitable for Single phase submersible pump set |
| 91 | 1.50 Sqmm copper two core Flat cable |
| 92 | Supplying istallation testing & commissioning of single Starter suitable to run 0.5 HP single phase pump set . |
| 93 | Supplying all labour, material & T&P for planting of ornamental decorative outdoor plants in the plant vase with provision of all required manures , pasticides etc as per necessity |
| 94 | Supplying labour T& p for cleaning the peripherial area of the drinking water kiosk, all complete sa per directionof EIC. |
| 95 | Supplying all materials, labour, T&P and fixing S.W gully trap grade- A complete with cost including C.I. Gully trap & C.I. grating, fly ash brick work chamber of size (250 x 250)with R.C.C Cover slab as per P.H Specification & desigh (including cost of gully trap & Grating ) |
| 96 | Supply & fixing of consumer water meter of size 15mm dia as per ISO 4064 including transportation etc all complete with 5 ( five ) year replacement guarantee from the date of receipt of the materials by the consignee as per direction of Engineer in charge .The water meter shall be inferential type , multijet, magnetically coupled having dry dial, Brass/Bronze body, copper can/stainless steel register with 5mm thick glas dialer class-B confiriming to ISO 4064 standard with ISI & MID certification mark, shall be with protection class of IP-68 complete with connecting pieces and all test certificate , water meter should have certificate for the model, approval as per the Indian Legal Metrology Act 2009 and weights & measure Marking ( i.e W&M marking) and confirming to the technical specification for consumer water meter including fitting of Domestic water meter stop cock in GI Mild Steel pipe/PVC pipe /PE pipe including cost of 15mm UPVC ball valve with solvent welded metal ball, 15mm brass NRV, 25 x 15mm Bush, 15mm FTA, 25mm or 15mm Union, 15mm pipe and any other fittings required all complete as per the direction of Engineer-In-Charge. . |
| 97 | Supplying all materials labour & T & P for ornamental painting on the top of wall & Govt of odisha logo, Sujal Logo & WATCO logo on the front wall of the Drinking water KIOSK as per design approved by the Deptt & direction of Engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender