Tender For Construction Of H.L Bridge Over River Benakania On Chadheikudi To Kahalpada Road In The District Of Puri Under Sby For The Year 2024-25.
Tender Value
2.62 Crore
Estimated cost
Bid Submission
29 Sep 2026
4 days left
EMD
2.62 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Puri → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of H.L Bridge Over River Benakania On Chadheikudi To Kahalpada Road In The District Of Puri Under Sby For The Year 2024-25.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work cutting in over burden earth in hard soil with all leads & lifts & depositing the excavated materials away from the working area complete as per specification & direction of the Engineer-in-Charge including cost of all labour & T&P articles required for the work etc.complete in all respect upto bed level as per specifcation and direction of Engineer-in-charge. |
| 2 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead as per Technical Specification Clause 202 of MoRD by manual means & as per direction of the Engineer-in-Charge. Reinforced Cement Concete |
| 3 | Earthwork in excavation for foundation of structures in all kinds of soil upto 3 m depth as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, and disposal up to a lead of 50m, dressing of sides and bottom and backfilling with excavated suitable materials and as per direction of Engineer-in-charge. |
| 4 | Fine dressing and turfing including transportation by mechanical means with all leads and lifts and placing of turfs in position and ramming with thapies including watering and cost of labour and all materials etc.complete as per the direction of the Engineer-in-charge. |
| 5 | Providing plain cement concrete M-10 in foundation & plinth with 4cm. crusher broken hard granite broken metal of approved quality from approved quarry including hoisting lowering & laying in layers not exceeding 150mm. thick with proper packing & ramming each layer of concrete by means of vibrator including curing, dewatering, shoring, shuttering if necessary at the time of laying concrete with cost, conveyance royality of all material required for the work including supplying & working pumps, T&P articles finishing the exposed surface smooth as per specific ation & direction of the Engineer-in Charge providing groove & beads where necessary complete in all respects. In Foundation (with dewatering) |
| 6 | Providing plain cement concrete M-15 with clean black hard granite stone aggregates of 40mm & down graded size of approved quality from approved quarry consistent with strength & cover of concrete & laying in position in layers not exceeding 150mm thick in the proper packing by means of vibrator to proper slope and to the required level including hoisting lowering laying concrete providing side shuttering & finishing all exposed surface smooth supplying & working of pumps, labour & T&P articles & all machineries, dewatering if required with cost conveyance, royality of all materials complete in all respect as per specification & direction of the Engineer-in-Charge. (i) In Foundation (Without Dewatering) |
| 7 | (ii) In Foundation (With Dewatering) |
| 8 | (iii) Up to Bed |
| 9 | (iv) In Substructure |
| 10 | Provision of an reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with M40 grade concrete with HYSD reinforcement and dowel bars at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given and as per dimensions in the approved drawing and at locations including cost,conveyance, royalty of all materials, labour charges ,T & P etc required for the work complete as per specification and direction of the Engineer-in- Charge. |
| 11 | R.C.C. of design mix of M-30 grade having specified characteristics compressive strength / target mean strength of 300kg / cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150mm x 150mm cubes at 28 days curring after mixing & tests conducted in accordance with relevant clauses of IS 456/ IS 516/IRC 216/1987/IRC-78/1983 using crusher broken hard granite coarse aggregate of 20mm down graded sizes & proportion as specified in clause-302.6.2 of IRC-21-1987 & IS-10262 & subject to mix design in conformity with the grading & proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry & using minimum quantity of cement confirming to codal provision including hoisting, lowerring & laying cocrete in layers not exceeding 15cm thick compacting with vibrators watering & curing for 28 days including water tight steel centering & shuttering & form works finishing the exposed surface smooth providing beads & grooves whereever necessary including cost, conveyance royaltities of all materials with all lead & lifts, cost of all labour, T&P & machinaries etc required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer-in-charge but excluding cost, conveyance of tor steel & binding wire & labour charges for straighthening, cutting, bending, binding, welding & tying the grills lapping splicing etc. where ever necessary & hoisting & placing in position (to be paid separately as required for RCC works) (i) In Foundation (Raft) |
| 12 | (ii) Above Bed Level |
| 13 | (iii) Abutment and Pier Cap |
| 14 | (iv) Approach Slab |
| 15 | (v) Dirt Walls |
| 16 | (vi) Column, Wing Wall & Tie Beam |
| 17 | (vii) In Superstructure (Deck Slab) |
| 18 | Providing & laying of wearing course of 56mm thick consisting of 6mm thick mastic asphalt and 50 mm thick asphaltic concrete on top of the Deck slab. The mastic asphalt shall be of paving grade bitumen meeting the requirement given in the table 500-39, prepared by using mastic cooker and laid to required level & slope after cleaning the surface, applying prime coat including providing antiskid surface with bitumen precoated fine grained hard stone chipping of all complete as per clause 501, 502,503 & 516 of MoRT&H Specification for road & bridge work (5th revision), followed by asphaltic concrete to be laid in two layers of 25mm thick each etc complete as per approved drawing & technical specification Clause No 503 & 507 of MoRT&H specifications for road & Bridge work (5th revision) and as per direction of the Engineer-in-charge. |
| 19 | Supply of HYSD bars confirming to grade Fe - 500 cutting bending, binding, lapping, splicing, welding etc. (conforming to IS 1786/1985 specification & jointing if necessary by lapping & tying the grills & placing in position as required for RCC works as per the approved design, hoisting, lowering & laying in position including cost & conveyance of tor steel & binding wires of 18 to 20 gauge(as to be approved by the Deptt.) etc. complete (weight of binding wire,laping shall not be considered for payment at all which will be borne by the contractor ) standard Co-efficient of different sizes of the steel shall be considered & welding & lapping should confirm to relevant clause of IRC-21/1987 as per direction of the Engineer in charge. |
| 20 | Providing & fixing guard stones of M-20 grade guard /boundary stone /local stone of standard design as per IRC-25 fixed position as per drawing and Technical Specifications MORD clause 1704 and as per direction of Engineer-in-Charge. |
| 21 | Providing weepholes in brick masonry / stone masonary , plain / reinforced concrete abutment wing wall , return wall with 100 mm dia AC pipe extending through the full width of the structure with slope of 1 (V) :20(H) towards drawing face complete as per drawing and techinical specificaiton and the direction of the Engineer-in-Charge |
| 22 | Supplying & filling good clean river sand inside the well/approach road including watering to complete saturation & ramming complete with all leads & lifts including cost, Conveyance, royality of all materials & cost of all labour & T&P required for the work complete ( measurement will be taken for compacted section as per direction of Engineer-in-Charge.) |
| 23 | Rough stone dry packing in aprons and revetments and stone pitching in slopes and boulder approns etc with hard granite stone of size 30 cm and above as per approved drawing and technical specifications complete in all respect as per Section 900, 1000 and 2500 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. |
| 24 | Providing& laying filter media with stone crushed aggregates of 45mm size satisfying the requirement laid down in clause 2504.2.2 of MoRTH specification to thickness of not less than 600mm with smaller size towards the soil and bigger size towards the wall & provided over the entire surface behind abutment,wingwall & return wall to the full height compacted to a firm condition complete as per drwawing & technical specification clauses and as per specification and direction of Engineer-in-charge. |
| 25 | Back filling with sandy material by using sand behind the abutment and wing wall including cost, conveyance and royality of all materials & cost of all labour & T&P reuired for the work complete (measurement will be taken for compacted section) as per specification and direction of Engineer-in-charge. |
| 26 | Gravel backing to revetment & slope of road embankment with good latrite moorum from stacks, stacked at work site or at approved stacking yard including watering and ramming with cost, conveyance, royality of all materials and cost of all labour T&P required for the work complete in all respect as per specification & direction of Engineer in Charge. |
| 27 | Finishing walls with two coats of water proofing Cement paint of approved shade on new work to give an even shade including cost of all labours, materials,carriage & royality etc. complete in all respects as per specifications & direction of the Engineer-in-Charge. |
| 28 | Providing fitting & fixing strip seal expansion joints at the edges of the slab with suitable anchoring arrangements by 12mm. M.S. Bars as per MOST design & drawing including fitting, fixing & welding with 6 mm. plates & filling joints of wearing coat with bitumen joint filler 12 mm. thick & joint sealing compound at top including painting of exposed surface of M.S. covered plates with anticorrosive bitumanstic paint etc. with cost, conveyance of all materials labour & T&P etc. complete in all respects as per specification & direction of the Engineer-in-Charge. |
| 29 | Providing, fitting and fixing Tar papers of approved size and quality as per approved design including cost,conveyance, royalty of all materials, labour charges ,T & P etc required for the work complete as per specification and direction of the Engineer-in- Charge. |
| 30 | Supplying and laying R.C.C. Hume pipes of NP3 class(confirming to relevant IS specification) for culverts including fixing collar with cement mortar 1:3 including cost, conveyance royality, labour, T&P,all other materials required for the work etc.complete as per direction of Engineer-in-charge.1000 mm dia |
| 31 | Providing and fixing drainage spouts (grated holes) in deck slab ( of HL Bridge & Box culvert) with 100 mm diameter G.I pipe for finished item of work as per approved drawing and technical specifications complete in all respect as per section 2700 & Clause 2705 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. |
| 32 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain & foundation of other structures with all lead & lift by mechanical means graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 & MORD clause 301.5 as directed by Engineer in charge. |
| 33 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 meters including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification and direction of Engineer-in-Charge. |
| 34 | Construction of embankment with approved material obtained from borrow pits with all lifts & leads, transporting to site by mechanical means, spreading, grading to required slope and compacting to meet requirement of Tables 300.2 & clause 305 of MoRT&H specification for Road & Bridge works as per direction of the Engineer-in-Charge. |
| 35 | Construction of granular sub-base by providing Close Graded Granular sub-base Grading - III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete with all leads & lifts including cost, conveyance, royalty of all materials & cost of all labour & T&P required for the work etc as per clause 401 of MoSRT&H Specifications for Road & Bridge works as per direction of the Engineer-in-Charge. |
| 36 | Providing, laying, spreading and compacting graded stone aggregates of specific sizes to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Technical Specification Clause 406 of MoSRT&H specification for road & bridge works (4th revision) including cost, conveyance, royalty, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge. |
| 37 | Providing and applying primer coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means for low porosity surface including cost, conveyance, royalty of materials, labour charges, T&P etc, required for the work complete as per clause 502 of MoRT&H specification and direction of Engineer in Charge. |
| 38 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 kg/sqm on the prepared bituminous / granular surfaces cleaned with mechanical broom as per Clause 503 of MoSRT&H specifications including cost, conveyance, royalty, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge. |
| 39 | Providing & laying compacted Bituminous Macadam (Grading - II ) using 60/70 grade Bitumen with Hot Mix Plant using crusher broken hard granite aggregates of specified grading premixed with bituminous binder @ 3.3 % by weight of total mix and filler, transporting the hot mix to works site, lying with Hydrostatic Paver Finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compacting as per Clause No.106, 108, 111, 112, 501, 503 , 504 and section 900 of specifications for Road and Bridge works of Ministry of Road Transport & Highways (5th Revision) & including cost of all materials, labour, T&P, royalty etc complete in all respect and as per direction of the Engineer-in-charge. |
| 40 | Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of 10mm nominal size (Grading-II) premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheelede,vibratory and tandem rollers to achieve the desired compaction as per Clause 508 of MoSRT&H Specifications for Road & Bridge works (4th Revision) including cost, conveyance, royalty, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge. |
| 41 | Providing and erecting direction and place identification retro-reflectorised sign as per IRC-67-2012 made of Class-B retro-reflective sheeting of high intensity and high intensity prismatic grade sheeting as per ASTM D 4956-09 Type-III and IV strictly conforming to Clause 6.7 of IRC 67-2012 and vide clause 801.3, fixed over aluminium sheeting, 4.00 mm thick as per Clause 6.5.2 of IRC : 67-2012 or A.C.P. (Aluminium composite panel) used for sign boards with a thermoplastic core of low density polyethylene (LDPE) between two thick sheets of aluminium with over all thickness of 4mm and aluminum thickness of 0.5mm on both sides supported on mild steel frames as detailed below, firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete (100 cm x 100 cm x 120 cm), 15 cm above ground level as per approved drawing including cost, conveyance & royality of all materials, labour, T & P, excavation, curing etc. complete, under & as per supervision of Engineer-in-Charge. (3650 mm x 2450 mm Rectangle) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender