Tender For Tender For Supply Of Equipment/Material, Design, Erection, Testing And Commissioning Of (P) 11/0.4 Kv 250 Kva Sub-Station Along With 11 Kv Ht And Lt Line For Providing Sop To Dhan Dhan Baba Amar Nath Screening Plant/Stone Crusher At Villag
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Oct 2026
3 days left
EMD
8300
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chamba → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Tender For Supply Of Equipment/Material, Design, Erection, Testing And Commissioning Of (P) 11/0.4 Kv 250 Kva Sub-Station Along With 11 Kv Ht And Lt Line For Providing Sop To Dhan Dhan Baba Amar Nath Screening Plant/Stone Crusher At Village Udaipur ( Chikdyani) In (E) Section Chaned (U) Esd Hpsebl Chamba No-Ii.
BOQ
| Sl. No. | Item Description |
| 1 | 11/0.4 kV 250 kVA Distribution Sub-station-Supply Part |
| 2 | X-Arm: [Channel Iron (100x50x5 mm), Length : 2800 mm X 2 Nos] |
| 3 | MS Angle Iron (50X50x5 mm), Length: 2800 mm x(1 Nos for LA's) |
| 4 | X-Arm: [Channel Iron (75x40x5 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
| 5 | X-Arm [Channel Iron (100x50x6 mm), Length : 2800 mm x 2 Nos for Transformer bed |
| 6 | X-Arm [Channel Iron (100x50x6 mm), Length : 460 mm x 2 Nos for supporting Main Channel of Transformer |
| 7 | MS Angle Iron (50X50x6 mm), Length : 2800 mm x 2 Nos |
| 8 | MS Angle Iron 35x35x5 mm), Length : 460 mm x 2 Nos |
| 9 | MS Angle Iron 50x50x6 mm), Length : 950 mm x 2 Nos for Bed Knee Bracing |
| 10 | MS Angle Iron (50X50x6 mm), Length : 2800 mm x 2 Nos for LT DISTRIBUTION BOX and GO switch assembly |
| 11 | MS Angle Iron (50X50x6 mm), Length : 450 mm x 1 Nos for LT DISTRIBUTION BOX and GO switch assembly |
| 12 | GO Switch Handle supporting : [ Channel Iron (75x40x6 mm), Length:460 mm |
| 13 | GO AB Switch Unit (11kV, 400A, 25 KA ) Triple Pole O/D Type |
| 14 | D.O Fuse Unit |
| 15 | Stay set complete |
| 16 | Stay Wire (7/3.15 mm) 7Kg per set |
| 17 | Pipe Earthing Set with GI, Charcoal & salt |
| 18 | LT Distribution Panel Box with ACB (630A, 50 kA,4P,1 No.) and SFU (100 A, 6 No., rewirable) |
| 19 | Half Clamp (M.S. Flat 50X6 mm) |
| 20 | Full Clamp ( M.S Flat 50x6 mm) |
| 21 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)] |
| 22 | Danger Plate |
| 23 | Barbed Wire |
| 24 | LT Cable 3.5 Core 300 sq. Mm (incomer/outgoing) |
| 25 | Aluminium Paint. |
| 26 | Red Oxide |
| 27 | Erection of 11/0.4 kV 250 kVA Distribution sub station |
| 28 | Steel Tubular Poles 9 mtr. Long W/L 200 Kgs ( Material to be provided by HPSEBL) |
| 29 | Muffs with concerete filling ( Material to be provided by HPSEBL) |
| 30 | 11/0.4 kV, 250 kVA Distribution Transformer ( Outdoor Type) ( Material to be provided by HPSEBL) |
| 31 | ACSR Conductor 6/1/3.35, 50 sq. Mm for earthing & jumpering ( Material to be provided by HPSEBL) |
| 32 | X-Arm: [Channel Iron (100x50x5 mm), Length : 2800 mm X 2 Nos] |
| 33 | MS Angle Iron (50X50x5 mm), Length: 2800 mm x(1 Nos for LA's) |
| 34 | X-Arm: [Channel Iron (75x40x5 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
| 35 | X-Arm [Channel Iron (100x50x6 mm), Length : 2800 mm x 2 Nos for Transformer bed |
| 36 | X-Arm [Channel Iron (100x50x6 mm), Length : 460 mm x 2 Nos for supporting Main Channel of Transformer |
| 37 | MS Angle Iron (50X50x6 mm), Length : 2800 mm x 2 Nos |
| 38 | MS Angle Iron 35x35x5 mm), Length : 460 mm x 2 Nos |
| 39 | MS Angle Iron 50x50x6 mm), Length : 950 mm x 2 Nos for Bed Knee Bracing |
| 40 | MS Angle Iron (50X50x6 mm), Length : 2800 mm x 2 Nos for LT DISTRIBUTION BOX and GO switch assembly |
| 41 | MS Angle Iron (50X50x6 mm), Length : 450 mm x 1 Nos for LT DISTRIBUTION BOX and GO switch assembly |
| 42 | GO Switch Handle supporting : [ Channel Iron (75x40x6 mm), Length:460 mm |
| 43 | GO AB Switch Unit (11kV, 400A, 25 KA ) Triple Pole O/D Type |
| 44 | D.O Fuse Unit |
| 45 | Surge Arrester, 9 kV Station Class (Porcelain Type) ( Material to be provided by HPSEBL) |
| 46 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) ( Material to be provided by HPSEBL) |
| 47 | Stay set complete |
| 48 | Stay Wire (7/3.15 mm) 7Kg per set |
| 49 | Pipe Earthing Set with GI, Charcoal & salt |
| 50 | LT Distribution Panel Box with ACB (630A, 50 kA,4P,1 No.) and SFU (100 A, 6 No., rewirable) |
| 51 | Half Clamp (M.S. Flat 50X6 mm) |
| 52 | Full Clamp ( M.S Flat 50x6 mm) |
| 53 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)] |
| 54 | Danger Plate |
| 55 | Barbed Wire |
| 56 | LT Cable 3.5 Core 300 sq. Mm (incomer/outgoing) |
| 57 | Aluminium Paint. |
| 58 | Red Oxide |
| 59 | Prov.Transformer Bed Plinth for 250 kVA s/stn Structure complete with CC 1:6:12 R.R masonry and plastering etc. a/w Chain Link fencing, Angle Iron Gate for DTR fencing |
| 60 | Transportation Charges ( Mechanical+ Mannual Carriage) |
| 61 | Supply of Three Phase 11 kV CT/PT Unit for 250 kVA s/stn |
| 62 | Prov. 11 kV CT-PT Unit i.e P.T (1 Unit, 11 kV/110 V) : CT (3 No. 50/5A) accuracy class 0.5s |
| 63 | Energy Meter (3-Ph, 4-Wire) Smart Meter for 11/0.4 kV 250 kVA DTR( Specification/Make be got approved from Sub-Divisional Engineer) |
| 64 | PVC Multistrand 4 mm sq. copper wire with 1 inch GI pipe (2 mtr.) for concealing with 2 nos. Bend joint/elbow |
| 65 | X-arm Channel Iron (100x50x5 mm): Length 460mmx2 nos.) for supporting main channel for CT-PT Unit |
| 66 | CT-PT Unit Belting and knee Bracing a) M.S Angle Iron (50x50x6 mm), Length 2800mmx4 Nos. |
| 67 | CT-PT Unit Belting and knee Bracing a) M.S Angle Iron (35x35x6 mm), Length 2800mmx2 Nos. |
| 68 | Half Clamp (M.S. Flat 50X6 mm) |
| 69 | Full Clamp ( M.S Flat 50x6 mm) |
| 70 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)] |
| 71 | Aluminium Thimble |
| 72 | Copper Thimble |
| 73 | Erection of Three Phase 11 kV CT/PT Unit for 250 kVA s/stn |
| 74 | Prov. 11 kV CT-PT Unit i.e P.T (1 Unit, 11 kV/110 V) : CT (3 No. 50/5A) accuracy class 0.5s |
| 75 | Energy Meter (3-Ph, 4-Wire) Smart Meter for 11/0.4 kV 250 kVA DTR( Specification/Make be got approved from Sub-Divisional Engineer) |
| 76 | PVC Multistrand 4 mm sq. copper wire with 1 inch GI pipe for concealing |
| 77 | X-arm Channel Iron (100x50x5 mm): Length 460mmx2 nos.) for supporting main channel for CT-PT Unit |
| 78 | CT-PT Unit Belting and knee Bracing a) M.S Angle Iron (50x50x6 mm), Length 2800mmx4 Nos. |
| 79 | CT-PT Unit Belting and knee Bracing a) M.S Angle Iron (35x35x6 mm), Length 2800mmx2 Nos. |
| 80 | Half Clamp (M.S. Flat 50X6 mm) |
| 81 | Full Clamp ( M.S Flat 50x6 mm) |
| 82 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)] |
| 83 | Aluminium Thimble |
| 84 | Copper Thimble |
| 85 | 11 kV HT Line with ACSR 6/1/3.35 mm sq. on Steel Tubular Poles 10 mtr. long (0.225 km) Supply Part |
| 86 | Cross Arm : [ Channel Iron (100x50x5 mm)] Length 2340mm, 2 Nos. Each for DP structure |
| 87 | X-Bracing Set - MS Angle iron for Belting 50X50X6mm L=1500 mmX2 Nos & L=2800mmx2 Nos |
| 88 | Belt Set-MS Angle Iron 50x50x6, Length 1800 mm |
| 89 | Angle Iron 50x50x6 ,Length 2800 mm for road crossing and Guarding for DP structure |
| 90 | Cross Arm : [ Channel Iron (100x50x5 mm)] Length 1270mm i/c tolerance of 100 mm either side |
| 91 | Angle Iron 50x50x6 ,Length 750 mm |
| 92 | Pole top Bracket (On single Pole Structure)[ MSCI:100x50x6- 100 mm] |
| 93 | 11 kV Pin Insulator |
| 94 | Stay set complete in all respect (i/c Egg Insulator & Stay Clamp) |
| 95 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
| 96 | HT Earthing set complete |
| 97 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 3% (Sag and wastage)} @ 0.102 kg/m |
| 98 | Eye Hook for earth wire |
| 99 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D typ |
| 100 | GO Switch Handle supporting : [ Channel Iron (75x40x6 mm), Length:460 mm |
| 101 | X-Arm: [Channel Iron (75x40x5 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
| 102 | D.O Fuse Unit |
| 103 | Danger Plate (230X200X1.6 mm) |
| 104 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)] |
| 105 | Aluminium Paint |
| 106 | Red Oxide |
| 107 | Half clamps |
| 108 | Full clamps |
| 109 | Barbed Wire |
| 110 | 11 kV HT Line with ACSR 6/1/3.35 mm sq. on Steel Tubular Poles 10 mtr. long (0.225 km) Erection Part |
| 111 | Steel Tubular Poles 10 mtr. Long, W/L 300kgfsqm ( Material to be provided by HPSEBL) |
| 112 | Muff for steel tubular pole with concrete filling ( Material to be provided by HPSEBL) |
| 113 | ACSR Conductor 6/1/3.35, 50 sq. Mm ( includes 3 conductor length and additional 3% sag (sag, jumpering and wastage)) ( Material to be provided by HPSEBL) |
| 114 | Cross Arm : [ Channel Iron (100x50x5 mm)] Length 2340mm, 2 Nos. Each for DP structure |
| 115 | X-Bracing Set - MS Angle iron for Belting 50X50X6mm L=1500 mmX2 Nos & L=2800mmx2 Nos |
| 116 | Belt Set-MS Angle Iron 50x50x6, Length 1800 mm |
| 117 | Angle Iron 50x50x6 ,Length 2800 mm for road crossing and Guarding for DP structure |
| 118 | Cross Arm : [ Channel Iron (100x50x5 mm)] Length 1270mm i/c tolerance of 100 mm either side |
| 119 | Angle Iron 50x50x6 ,Length 750 mm |
| 120 | Pole top Bracket (On single Pole Structure)[ MSCI:100x50x6- 100 mm] |
| 121 | Disc insulator set(1no. Disc, Porcelain BS,12 Kv, 90 KN) including Dead end clamps, bend staple, ball eye cleave set. ( Material to be provided by HPSEBL) |
| 122 | 11 kV Pin Insulator |
| 123 | Stay set complete in all respect (i/c Egg Insulator & Stay Clamp) |
| 124 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
| 125 | HT Earthing set complete |
| 126 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 3% (Sag and wastage)} @ 0.102 kg/m |
| 127 | Eye Hook for earth wire |
| 128 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D typ |
| 129 | GO Switch Handle supporting : [ Channel Iron (75x40x6 mm), Length:460 mm |
| 130 | X-Arm: [Channel Iron (75x40x5 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
| 131 | D.O Fuse Unit |
| 132 | Danger Plate (230X200X1.6 mm) |
| 133 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)] |
| 134 | Aluminium Paint |
| 135 | Red Oxide |
| 136 | Half clamps |
| 137 | Full clamps |
| 138 | Barbed Wire |
| 139 | Transportation Charges ( Mechanical+ Mannual Carriage) |
| 140 | 3-phase LT Line with ACSR 6/1/3.35 mm sq. on Steel Tubular Poles 9mtr. long (0.045 km) Supply Part |
| 141 | Prov. G.I. Wire 8 SWG |
| 142 | LT AB 3.5 core 35 sq. Mm PVC (1.1 kV, Al, Un-Armour) |
| 143 | Prov. Shackle insulator (16KN) (RECD-3/761)(ISS No 1445/1977) |
| 144 | Prov. D Iron (U-Clamp) (RECD-4/79)(ISS No 7935/1975) |
| 145 | Prov. LT Stay Set complete REC No 31/1983 |
| 146 | Prov. Egg insulator |
| 147 | Prov. Stay Wire |
| 148 | Prov. Full Clamp |
| 149 | Prov. Half Clamp (MS 50x6 mm) |
| 150 | Prov.MS Angle Iron 75x75x6, Length 1.5 mtr |
| 151 | Earth Reel |
| 152 | LT Earthing Set complete |
| 153 | Prov. Nut & Bolts off sizes |
| 154 | Aluminium Paint |
| 155 | Spiral PVC Spacer |
| 156 | Digital Clamp Multimeter |
| 157 | Automatic come along clamp (for conductor Sag) |
| 158 | 3-phase LT Line with ACSR 6/1/3.35 mm sq. on Steel Tubular Poles 9mtr. long (0.045 km) Erection Part |
| 159 | Steel Tubular Poles 9 Mtr. Long, Working Load > 200 kgf/m² ( Material to be provided by HPSEBL) |
| 160 | RCC muffing ( Material to be provided by HPSEBL) |
| 161 | G.I. Wire 8 SWG |
| 162 | ACSR 6/1/3.35 mm[ includes 3 conductor length for 3Phase and additional 3% (sag, jumpering and wastage) ( Material to be provided by HPSEBL) |
| 163 | LT AB 3.5 core 35 sq. Mm PVC (1.1 kV, Al, Un-Armour) |
| 164 | Shackle insulator (16KN) (RECD-3/761)(ISS No 1445/1977) |
| 165 | D Iron (U-Clamp) (RECD-4/79)(ISS No 7935/1975) |
| 166 | LT Stay Set complete REC No 31/1983 |
| 167 | Egg insulator |
| 168 | Stay Wire |
| 169 | Full Clamp |
| 170 | Half Clamp (MS 50x6 mm) |
| 171 | Prov.MS Angle Iron 75x75x6, Length 1.5 mtr |
| 172 | Earth Reel |
| 173 | LT Earthing Set complete |
| 174 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)] |
| 175 | Aluminium Paint |
| 176 | Spiral PVC Spacer |
| 177 | Transportation Charges ( Mechanical+ Mannual Carriage) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender