Tender For Repairing And Servicing Of Existing Pump Sets And Allied Accessories At Reps Naraina Industrial Area, Delhi.
Tender Value
7.10 Lakhs
Estimated cost
Bid Submission
29 Sep 2026
0 days left
EMD
14220
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing And Servicing Of Existing Pump Sets And Allied Accessories At Reps Naraina Industrial Area, Delhi.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required.250 A,36KA,FPMCCB |
| 2 | 400 A,50KA,FPMCCB |
| 3 | Replacement of non-functional Motor to new Motor as per requirement of site, motor to be suitable for operation 40HP Motor and RPM 1440 Make: Kirloskar, Scope includes supply and fixing of motor pump Coupling tyre of requisite size, all dismantling work and fixing of new pump, nuts and bolts,coupling tyre credit of dismantle to the contractor / agency. Work to be carried out as per requirement of site and direction of Engineer-In-Charge. |
| 4 | Repairing and Servicing of existing mono block pump sets, scope includes complete overhauling, greasing, replacement of bearing, necessary lubrication etc. Capacity 40 HP, Make: Crompton Greaves, to make pump fully functional in all respects and as per requirement of site or as per direction of Engineer-in-Charge. |
| 5 | Repairing and Servicing of Starter Panel of existing mono block pump set, scope includes complete overhauling, replacement of defective parts etc. Starter Capacity 40 HP,Scope also includes making starter fully functional in all respects including necessary safety parameters, dismentling and refixing of relay & other equipments after cleaning, Tightning of loose connections, checking input & output parameters, as per requirement of site or as per direction of Engineer-in-Charge with credit of dismantle to agency/ contractor, if any. |
| 6 | Lowering and lifting Charges of 40 HP, 3-Phase Motor, Scope includes all kind of specialized tools like tripod, chain pully, specialized heavy labour etc. inclusive of to and fro charges, labour charges etc. as per requirment of site and direction of Engineer-in-Charge. |
| 7 | Servicing of LT Panel , MCCBs, Tighting of all nut bolts, bus bars, all loose connections, changing of brunt thimbles of different sizes, by expert. Scope includes, the paint on the LT Panel of requisite shade. Scope also includes cleaning of LT Panel through blowers and vaccum cleaner etc. as per requirement of site and direction of Engineer-In-Charge. |
| 8 | Repairing and servicing of Industrial Exhaust Fan Motor, scope includes rewinding of the motor, capactity 2 HP, Make: Crompton Greaves, Scope includes to and fro charges, lifting and lowering charges, etc. all required items for making the fan in working condition with credit of all dismentle material to Contractor/ Agency. |
| 9 | Replacement of existing broken / damaged Base Frame of Monoblock Pump Set of capacity 40 HP, Scope includes supply and fixing of New Base Frame alongwith nuts and bolts, welding work etc,Work to be carried out as per requirement of site and direction of Engineer-In-Charge. |
| 10 | Fabrication installation testing and commissioning of Aluminium Bus Bars 40mm x 10mm(3 Run) and interconnections for 400 amp MCCB Work to be carried out as per requirement of site and direction of Engineer-In-Charge. |
| 11 | Supply,Fabrication,welding,fixing and installation of 6mm thick MS sheet complete with suitable ,including cutting,spreparation,frame fabrication,alignment,welding,grinding,drilling,lifting,transportation,fixing with suitable fasteners,one coat anti-rust primer and two coats synthetic enamel paint,finishing and all labour tools & tackles consumbles Work to be carried out as per requirement of site and direction of Engineer-In-Charge. |
| 12 | Spray painting of existing electrical LT panel including re-fixing of panel accessories wherever required,anti rust metal primer and coats synthetic enamel spray paint Work to be carried out as per requirement of site and direction of Engineer-In-Charge. |
| 13 | Fabrication and welding of suitable heavy duty MS mounting base for fixing of lifting ring (Eye bolt) on existing induction motor body,including cutting welding,grinding,drilling and touch-up paint complete work. |
| 14 | Fabrication,replacement & fixing of MS reducer of requisite size required for smooth operation of rising main system (Inlet & outlet of pump ) In dry well of REPS, scope includes dismantling of existing damaged reducers alongwith credit of dismantle to the agency, cost of pipe,flanges,nuts & bolts of requisite size & Gauge , cost welding rod and labour/ welder etc.as per requitrement of site and direction of engineer-in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender