Tender For Construction Of Tehsil Office Srigufwara. Advt.Cost=₹ 115.17 Lacs, Amount Without Gst= ₹97.60 Lacs, Gst Amount= ₹17.57 Lacs
Tender Value
1.15 Crore
Estimated cost
Bid Submission
05 Oct 2026
2 days left
EMD
2.30 Lakhs
Bank guarantee accepted
Document Fee
2600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Tehsil Office Srigufwara. Advt.Cost=₹ 115.17 Lacs, Amount Without Gst= ₹97.60 Lacs, Gst Amount= ₹17.57 Lacs
BOQ
| Sl. No. | Item Description |
| 1 | A. Office Building: Providing and laying of RBM / stone soiling of specified size including spreading, watering,ramming, compacting under floors including all taxes like royality and carriage of the same from approved source up to site of work |
| 2 | P/L in position cement concrete in 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) incl boulders |
| 4 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more. |
| 7 | SUPPLYING/FIXING OF ANCHOR BOLTS OF 16MM DIA. 450 MM LONG INCL. NUTS and washer complete job |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundation |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form work for: Columns Pillars piers,abutments posts & Struts |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for: Suspended floors,Roofs,landing,balconies, and acess platforms |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for: lintel beams,plinth beams girders,bressumers,and cantilivers |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form work for:Edges of Slab and breaks in floors and walls under 20Cm |
| 13 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 14 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 15 | Structural steel work welded in built up sections, framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and including all carriages complete. |
| 16 | P/F of high rib colour coated sheet roofing of 0.5mm including polymer coated J or L hooks and GI limpit washer includes ridges and valleys complete job including all carraiges. (measured for unit of laid area) 0.50mm THICK (TATA,JSW OR EQ brand) I/C ALL CARRIAGES/H/LOAD |
| 17 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 18 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately but including cost of carriages (imported/KD wood) |
| 19 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, including panelling, all complete as per direction of Engineer-in-charge. (KD/imported 30 mm thick) |
| 20 | P/F of wire gauge shutters including ISI marked butt hinges bright finished of required size with necessary screws including all carriages as per direction of Engineer-in-charge (imported/KD wood 30mm thick) |
| 21 | Providing and fixing of 3.5 mm thick glass panes including cost of wooden beading, screws etc ( Fixed Glass) |
| 22 | Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats, square or round bars etc including priming coat with approvedsteel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. |
| 23 | P/F of aluminium fittings ISI marked as per IS 1868 transparent or dyed to reqd colour with all necessary screws etc complete job : Handles 150 mm |
| 24 | Handles 100 mm |
| 25 | Tower bolt 150 x 10 mm |
| 26 | Tower bolt 100 x 10 mm |
| 27 | Aldrop bolt |
| 28 | Magnetic catcher |
| 29 | Door stopper |
| 30 | Eye hook 5\\" |
| 31 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 32 | 12mm Cement plaster of mix: 1 : 4( 1 cement : 4 fine sand) including Carriage complete |
| 33 | 12mm Cement plaster of mix: 1 : 6( 1 cement : 6 fine sand) including Carriage complete |
| 34 | 6MM CEMENT PLASTER 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 35 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In colours such as White, Ivory, Fume Red Brown |
| 36 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 37 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 38 | Stone tile work for wall linig upto 10m height with special adhesives like araldite or eq. over 12mm thick bed of cement motar 1:3 incld pointing in white cement with an admixture of pigment to match the stone shade 8mm thick granite stone(mirror polished and machine cut edges) |
| 39 | Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut granite stone for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding of edges and polishing to edge to give high gloss finish etc. complete at all levels Granite of any colour and shape 18 mm thick |
| 40 | Providing edge moulding to 18 mm thick Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work |
| 41 | P/F of Wood Panneling Imported wood pannelling incld all fitting beadings with 12mm thick ply base and incld two or more coats of malamine polish complete job incld carriage |
| 42 | Providing and fixing of KHATAM BANDI ceiling of first clas budloo/fir wood including base of 12mm thick ply wood including priming with two or more coats of malamine polish all job complete Punch murabah. |
| 43 | P/F of ornamental wooden posts/flats carved out of 5\\"x5\\" cross sections including all fixtures/nails/screws as per approved design by EIC including priming coat with two or more coats of malamine polish all job complete Walnut wood |
| 44 | P/F of ornamental wooden flats carved out of 7\\"x1.5\\" cross sections including all fixtures/nails/screws/bolts as per approved design by EIC including priming with two or more coats of malamine polish all job complete Walnut wood |
| 45 | P/F of wooden rails of size 4\\"x3\\" cross sections including all fixtures/nails/screws /boltsas per approved design by EIC for court Room.including priming with two or more coats of malamine polish all job complete Walnut wood |
| 46 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 47 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 48 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 49 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work including all leads lifts , head loads complete job |
| 50 | Pointing on brick work with lime Surkhi with 1:1 ( 1 lime : 1 Surkhi) lime Surkhi mortar on fair side of brick masonry /concert walls up to floor VI level including finishing even and smooth to give a local heritage touch as per the directions of Consultant/Engineer incharge upto deseried height complete in all respects. (Including all lead, lift, labour, materials, tools, plants complete as per specification and as directed by Engineer in Charge.) |
| 51 | Providing and fixing of water heater (Gyser) of standard quality like Racold, Jaquar or eqv with all necessary fittings like PVC Connections, including drilling holesin walls,gyser bolts etc all compl;ete as per the directions of incharhe engineer at site 50 lit capacity. |
| 52 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 53 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 54 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape 453x357 mm |
| 55 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets,cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040mm bowl depth 250m |
| 56 | Providing /Fixing of centrifugal monoset self priming 1 HP water Motor Crompton including fixtures and carriages complete job |
| 57 | Providing and Placing in terrace PVC storage tank with cover and suitable locking arrangement incl. making necessary holes for inlet, outlet and over flow pipes incl. all fittings & Ball cock of approved size Star /Sintex. |
| 58 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer incharge .Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.25 mm OD(SDR-7.4) |
| 59 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer incharge .Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 32mm OD(SDR-7.4) |
| 60 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer incharge .Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 40mm OD(SDR-7.4) |
| 61 | Providing & Fixing following C.P fittings of standard quality Jaquar/cera/hindware or equivalent make 15 mm dia Brass bib cock long boby |
| 62 | Wall Mixer |
| 63 | Basin Mixer |
| 64 | C.P. Brass angle valve 15 mm |
| 65 | 600mm long Towel rod |
| 66 | Toilet paper holder |
| 67 | Health faucet with holder |
| 68 | GI Ball value(Zoloto make) |
| 69 | PVC waste pipe flexible pipe 32mm dia |
| 70 | PVC floor trap with SS floor Drainer/Jali as approved by incharge engineer at site |
| 71 | Providing and fixing water closet squatting pan (european type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.WC Pan with ISI marked white solid plastic and lid |
| 72 | Providing & Fixing PVC ( Prince Make) pipe incl. cost of rubber washer and adhesive complete type B incld cutting and refilling the trenches where ever required100 mm |
| 73 | Providing & Fixing PVC ( Prince Make) pipe incl. cost of rubber washer and adhesive complete type B incld cutting and refilling the trenches where ever required 75mm |
| 74 | Providing & Fixing PVC ( Prince Make) following fittings complete job Door Tee 100mm size |
| 75 | PVC collar 100mm |
| 76 | PVC collar 75 mm |
| 77 | PVC Reducer 100x75mm |
| 78 | Door Bend 75 mm size |
| 79 | Plain Bend 100 mm size |
| 80 | Plain Bend 75 mm size |
| 81 | Cowl & clif |
| 82 | Construction of brick Masonry Inspection chamber 450x450x220 inside size using FBS bricks in 1:4 Mix finished inside with 1:4 Cement motor with a coat of neat cement sullary with Gl frame and cover and laid on suitabe foundation on levelled ground |
| 83 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete. |
| 84 | P/f of flexi banner with Computerised writing as per directions of EIC including all leads ans lifts and fixtures/adhesives |
| 85 | P/F PVC conduits 25 mm dia in slab including MMS, Fan Box, Light Box etc Complete Job as per EIC. Fenolex |
| 86 | Carriage of Materials by Mechanical Transport for an average lead of 15 kms Aggregate |
| 87 | Carriage of Materials by Mechanical Transport for an average lead of 15 kms sand |
| 88 | Carriage of Materials by Mechanical Transport for an average lead of 2 kms Bricks |
| 89 | Part B : Septic Tank & Sokage Pit : Earth work in excavation by mechanical means in trenches for foundations (not exceeding 1.5 m in width), including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil. |
| 90 | Filling Available excavated Earth in trenches, plinth,sides of foundation etc.in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming andwatering lead upto 50m and lift upto 1.5m. |
| 91 | S/P of Stone Soling hand packed tightly in bed including levelling & ramming including carriage by MT for all leads & lifts. |
| 92 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1: 4: 8 (1 cement: 4 coarse sand: 8 graded stone aggregates 40mm NS). |
| 93 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 94 | Brickwork with common burnt clay F.P.S. (non-modular) bricks of class designation 75 in foundation and plinth in Cement mortar 1: 4 (1 cement: 4 sand). |
| 95 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level in 1: 1½: 3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 96 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 97 | Centring and shuttering including strutting, propping etc. and removal of formwork for Foundations, footings, bases for columns |
| 98 | Centring and shuttering including strutting, propping etc. and removal of formwork for Edges of slabs and breaks in floors and walls |
| 99 | Applying 12mm thick Plaster of 1: 4 (1 cement: 4 fine sand) finished with a floating coat of neat cement slurry. |
| 100 | Dry RRM with hard stone in Soakage Pit using quarry stone with bond stone including carriage. |
| 101 | Carriage of Materials by Mechanical Transport for an average lead of 15 kms Aggregate |
| 102 | Carriage of Materials by Mechanical Transport for an average lead of 15 kms sand |
| 103 | Carriage of Materials by Mechanical Transport for an average lead of 2 kms Bricks |
| 104 | C. Breast Wall: Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil. |
| 105 | Providing and laying of quarry stone soling hand packed tightly incl ramming watering and filling of interstices incl all carriage complete job. |
| 106 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 107 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 108 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundation |
| 109 | Centering shuttering incl. starightening and removal of form work for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 110 | Supply and filling of RBM /Stone soling of specified size including spreading complete job i/c carriage Complete Job. |
| 111 | Providing weepholes in abutments, R/walls, B/Walls etc with 75mm dia PVC pipe cut to length and profile as required to be installed in concrete and other incidentals. |
| 112 | Carriage of Materials by Mechanical Transport for an average lead of 15 kms Aggregate /Sand |
| 113 | Part D: Innaugration/Foundation stone: Earth work in excavation by MANUALmeans in trenches for foundations (not exceeding 1.5 m in width), including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil. |
| 114 | S/P of Stone Soling hand packed tightly in bed including levelling & ramming including carriage by MT for all leads & lifts. |
| 115 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1: 4: 8 (1 cement: 4 coarse sand: 8 graded stone aggregates 40mm NS). |
| 116 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) incl boulders |
| 117 | Brickwork with common burnt clay F.P.S. (non-modular) bricks of class designation 75 in foundation and plinth in Cement mortar 1: 4 (1 cement: 4 sand). |
| 118 | 12mm Cement plaster of mix: 1 : 6( 1 cement : 6 fine sand) including Carriage complete |
| 119 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 120 | Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut granite stone for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding of edges and polishing to edge to give high gloss finish etc. complete at all levels Granite of any colour and shape 18 mm thick |
| 121 | Providing and fixing vertical blender-type inauguration curtain system, comprising high-quality fabric curtains (such as velvet or satin) in approved color (typically red/maroon), fixed on a vertical sliding/blender mechanism with smooth operation. The system shall include powder coated or stainless steel rods, pulley/wire system for vertical opening, ribbon/tassel for manual unveiling, and decorative brackets. Curtain shall be neatly pleated, stitched, and hemmed with ornamental borders. The system should ensure ease of operation and elegant appearance. The rate includes all materials, fabrication, installation, labor, transportation, and taxes, complete as per the direction of Engineer-in-charge. |
| 122 | Providing laser-engraved text on polished stone (granite/marble) for inauguration purposes, including layout designing, formatting in approved font and size, engraving through precision laser etching process, black/gold paint infill (if required), surface cleaning, and fixing of the stone at site with appropriate adhesive/fixing clamps, all complete as per direction of Engineer-in-charge. The rate includes all materials, labor, tools, transportation, and taxes excluding cost granite stone |
| 123 | Supply of Decorative Flowers as per directions of EIC |
| 124 | Electrical Part: Wiring for light point/fan point/exhaust fan point/call bell point with 2 x 1.5 sq.mm PVC Insulated, FRLS copper conductor, 1100 V grade wires, conforming to IS 694, with conductors as per 15 8130 and Insulation as per 15 5831, and having fire performance in accordance with IEC 60332, ISI marked with valid BIS license, complete with all accessories, (Havell/Polycab/APAR/Fenolex/KEI/RR Label/ Anchor or OEMs/ firms holding 150 9001 certification (Quality Management System) and shall be supplied with routine test certificates, and any material not conforming to the specified standards shall be rejected, complete with all accessories as required; single core cable in surface/recessed medium class PVC conduit (including cost of conduit), with modular switch (Legrand /SSK /schneider /Crabtree /athena make.), modular plate, suitable Gi box and earthing the point with 1.5 sq.mm FRLS PVC Insulated copper conductor single core cable etc. as required. Group A |
| 125 | Wiring for light point/fan point/exhaust fan point/call bell point with 2 x 1.5 sq.mm PVC Insulated, FRLS copper conductor, 1100 V grade wires, conforming to IS 694, with conductors as per 15 8130 and Insulation as per 15 5831, and having fire performance in accordance with IEC 60332, ISI marked with valid BIS license, complete with all accessories, (Havell/Polycab/APAR/Fenolex/KEI/RR Label/ Anchor or OEMs/ firms holding 150 9001 certification (Quality Management System) and shall be supplied with routine test certificates, and any material not conforming to the specified standards shall be rejected, complete with all accessories as required; single core cable in surface/recessed medium class PVC conduit (including cost of conduit), with modular switch (Legrand /SSK /schneider /Crabtree /athena make.), modular plate, suitable Gi box and earthing the point with 1.5 sq.mm FRLS PVC Insulated copper conductor single core cable etc. as required. Group -C |
| 126 | Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wire, FRLS PVC Mtr sq.mm Insulated copper conductor (Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit (including cost of conduit) |
| 127 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, & Socket: (Legrand /SSK Supplying and fixing suitable size Gl box with modular plate and cover in front on Each /schneider /Crabtree/athena make.) |
| 128 | Wiring for lighting circuits/inverter circuits/6-10 amp power plug with 2X2.5 sq. Mtr mm FRLS PVC Insulated copper conductor (Havell/Polycab/APAR/Fenolex/KEI/RR kabel/Anchor make) as described in item no 1 as directed by engineer Incharge.) single core cable in surface/recessed medium class PVC conduit, (including cost of.conduit) alongwith 1 No. 2.5 sq. mm FRLS PVC Insulated copper conductor single core cable for loop earthing as required. |
| 129 | Supplying and fixing suitable size Gi box with modular plate and cover in front on surface or in recess, including providing and fixing 2 no. 3 pin 5-10 A modular socket outlet and 2 no. 5-10 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:-Legrand /SSK/schneider /Crabtree/athena make.) |
| 130 | Supplying and fixing of following modular switch/ socket/indicator on the No. existing modular plate and switch box Including connections but excluding modular plate etc. as required. 1. 3 pin 5/6A socket outlet |
| 131 | Supplying and fixing of following modular switch/ socket/indicator on the No. existing modular plate and switch box including connections but excluding modular plate etc. as required. I. Indicator |
| 132 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC Insulated copper conductor (Havell/Polycab/APAR/ Fenolex/KEI/RR kabel/ Anchor make as described in item no 1, single core cable in surface/recessed medium class PVC conduit as required. Including cost of conduit, 1 2 X 1.5 sq. mm + 1X 1.5 sq. mm earth wire (Inverter Circult) |
| 133 | 2X2.5 sq. mm + 1 X 2.5 sq. mm earth wire (Lighting Circuit) |
| 134 | 2X6 sq. mm + 1X6 sq. mm earth wire (Lighting submain) |
| 135 | 2 X 10 sq. mm + 1X6 sq. mm earth wire (Heating submain) |
| 136 | S/F testing and comm. Of MCB's 10 kA of the below mentioned capacities in sub main controls legrand C curve Schneider/Legrand/ABB, /Havells/Siemens/ L&T/Hager /BCH make OR OEMs/firms holding ISO 9001 certification (Quality Management System) as directed by engineer In charge. 6-32 Amp SP MCB |
| 137 | 32 amp DP MCB |
| 138 | 63amp DP MCB |
| 139 | Supply and fixing modular blanking plates on existing modular switch plates, excluding cost of plates. |
| 140 | Supplying and fixing following way, Horizontal type, Single pole and neutral, sheet steel, MCB distribution board, legrand/Shinider/Hager/ABB/SSK/GM make) 240 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar,din bar. interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) 6 way (4+18), Double door |
| 141 | Supply installation testing and commissioning of 12 W LED Surface/recess, No square or round Mounted light luminary fitting with minimum system lumen efficacy of 100 lm/W. The Input voltage range shall be 150V to 270V. The Fixture should have In-built Surge Protection of 2kV. Certification: LM79 & LM80 test report should be from govt. approved in-house NABL lab/ government of India. The Job Includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years,which includes replacement of fatures also. (Philips/ Havel's /Wipro or eq, make/sample to be approved before Installation). |
| 142 | Supply, Installation, testing and commissioning of exhaust fan of 200-250 mm sweep suitable for wall/window mounting, complete with necessary frame, mounting arrangement, louvers/shutter, and all accessories as required; the fan shall be of robust construction with high-grade engineering plastic/metal body, aerodynamically designed blades, and heavy-duty copper motor suitable for continuous operation, conforming to relevant Indian Standards and safety requirements of Havell/Bajaj/Crompton/USHA/Orient OR OEMs/firms holding ISO 9001 certification (Quality Management System) as directed by engineer incharge as per site requirement and necessary connections. |
| 143 | Supply, Installation, Testing and Commissioning of 1200 mm sweep,, ceiling fan No with Brush Less Direct Current (BLDC) Motor, class of Insulation: B, 3 nos, blades, suitable long down rod, 2 no. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Alr delivery minimum 215 CMM, 350 RPM (tolerance as per IS: 374-2019), THD less than 10%, remote regulator unit for speed control and all remaining accessories Including safety pin, nut bolts, washers, temperature rise-75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Atomberg/Orient/USHA /Havells/Crompton/OR OEMs/firms holding ISO 9001 certification (Quality Management System) as directed by engineer incharge |
| 144 | Supply and fixing of 6 amp/250 V AC fan dimmer step type 2 module with cover plate Anchor Roma plus/SSK/ABB/Schneider/Legrand or equivalent make. |
| 145 | Supply installation testing and comm. of flood light 100 W (warm, white), Epoxy powder coated die-cast aluminium housing (LM24) with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. PG9 gland is used for cable entry and provision for loopin-loopout class 1, IP66, IK 07,, with high power LED's as light source with Built-In Potted IP67 electronic LED driver with APFC, lower THD, toughned glass and secondary lens, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV With Built In SPD & other safety test as per IS 15885 Part-2/Sec 13, IEC60598-1. Preferred make: Philips/ Havell/Wipro/Crompton make. the job also includes the angle iron stand of suitable size to be grouted in cement concrete with hold fasteners complete job. |
| 146 | S/Laying (partly overhead/ partly underground), testing and commissioning aluminum armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with Amendments. Havell/Eq. standard make as directed by engineer in charge and termination with brass compression gland and aluminum lugs of required size. 70 sq.mm 2 core (armoured) |
| 147 | PANEL: Design, Fabrication, Supplying, Installation, Testing and Commissioning of Cft. following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel, floor mounted, vermin and dust proof, outdoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears,, Aluminum Bus Bar of various ratings after taking Derating factor Into account, and other allled accessories etc. as required. The scope of work also entalls securely installing the panel into the ground with concrete encasing its legs (As per approved design,size may vary as per site requirement) |
| 148 | INCOMING 125 amp DP MCB 10 KA Legrand /Schneider/L&T/ABB make. |
| 149 | 2 No. of Aluminum Bus Bar of 200 Amp. |
| 150 | Change over switch 63 Amp Front operated |
| 151 | 2 No. of Aluminum Bus Bar of 200 Amp |
| 152 | Digital moters and phase indicators |
| 153 | OUTGOING 63 amp DP 10KA MCB |
| 154 | 40 amp DP 10KA MCB |
| 155 | Providing/laying of shock proof rubber mat of 2mtr x1 mtr and 12 mm thick in size. |
| 156 | Providing of chemical earthing as per IS standards by way of digging 6 feet pit then embedding 2.5 mtr. Long Gl earthing electrode, 60 mm dia. Connecting the electrode with main control board by 10 SWG Copper wire with 1/2\\" dia. Full thread brass nut and bolts and washers, refilling the pit with chemical compound. |
| 157 | Supply, installation, testing and commissioning of 1625VA Power Inverter (Pure No. Sine Wave type) having generator compatible & provided and fitted with 2 no. 12V, 200 Ah, tall tubular batteries of Exide/Luminous/ Microtech make and PVC trolley for resting/ housing of batteries. The job also includes terminal connections of batteries, input/output leads of required size and length, carriage and applicable taxes. |
| 158 | Supply, Installation, testing and commissioning of 3 star rating 1.5 Ton Inverter type split Air Conditioners suitable for operation on AC supply single phase 50Hz 230V with hermetically sealed inverter compressor with air cooled condenser latest R410A/ R-32 refrigerant fan motor, start and run capacitors, relay and over load protector internal unit with one indoor and one outdoor unit. The indoor unit fitted on wall by employing suitable clamps and the outdoor unit will be placed on angle iron stand fitted with nut/bolts outside the room to avoid noise, including standard length of suitable size copper tubing covered with nitrile foam, topping up with refrigerant for additional length of piping if required, PVC flexible drain pipe, suitable capacity 3 core sheathed/ PVC insulated copper cable and a battery operated wireless remote unit. The job includes repairs to walls wherever the same are cut and the AMC of AC for a period of one and a half year from date of sucessfull Commissioning.( Daikin/Blue star/ Lg/IFB) HOT & COLD |
| 159 | Installation, Testing & commissioning of 1.5 TR Capacity Wall mounted Split Air No. conditioners including all necessary accessories, fixing of indoor Unit, fixing of Outdoor Unit on Dully painted suitable size MS Stand Including grouting/mounting of stand, Including first charging of refrigerant with laying of Insulated copper pipe lines liquid and suction lines and Installation of Drain pipe etc. complete for above item as per site requirement |
| 160 | Supply, Installation, testing and commissioning of relay type voltage stabilizer No. suitable for 1.5 Ton AC operating from input voltage 90-260Volt thereby producing output voltage of 230volts +3%. (4 KVA) |
| 161 | Supply and installation of 32-40A modular plug/socket with 32-40A DP MCB No. for ACs. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender