Tender For Construction Of New Anganwadi Building At Irular Kudisai In Mothakkal Panchayat -2025-26 In Thandar Et Block
Tender Value
17.35 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
6 days left
EMD
17400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruvannamalai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of New Anganwadi Building At Irular Kudisai In Mothakkal Panchayat -2025-26 In Thandar Et Block
BOQ
| Sl. No. | Item Description |
| 1 | Construction of New Anganwadi Building at Irular Kudisai in Mothakkal panchayat |
| 2 | Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil, hard stiff clay, black cotton soil, hard red earth,shales, murram, and earth muds with 50% fair sized boulders as per SS 20B for narrow foundation |
| 3 | Collection and supply of gravel from approved quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete, |
| 4 | Plain Cement Concrete 1:4:8 (one cement, four sand and eight hard granite broken stone of 40mm size ISS gauge) for foundation and footing including mixing, placing, ramming ,finishing curing etc. complete in accordance with standard specification and as directed by the TWAD Board Officers. |
| 5 | Brick work in C.M 1:5 mix using country bricks incuding cost and conveyance and all labour charges etc. |
| 6 | Brick work in C.M 1:5 mix using country bricks incuding cost and conveyance and all labour charges etc. |
| 7 | RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc. |
| 8 | RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc. |
| 9 | Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc. |
| 10 | Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc. |
| 11 | Supply and fabrication of steel including cost and conveyance and all labour charges etc. complete. |
| 12 | Weathering coarse concrete using 20mm size broken brick jelly with in pure slaked lime over the RCC Roof in the proportion of 32 : 12 1/2 by volume laid in layer beating the concrete with the wooden batters etc as per standard specifications . |
| 13 | Finishing pressed tiles reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three M.Sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works) |
| 14 | Plastering with cement mortar 1:5, 12mm thick including cost and conveyance and all labour charges etc. |
| 15 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. |
| 16 | Cement concrete 1:2:4 mix using 20mm ISS metal including cost and including cost and conveyance and all labour charges etc,. |
| 17 | Paving the Floor with scratch proof vertified tiles of size 600x600x8mm laid in CM 1;2,10mm thick and pointing with white cement 0.40kg per sqm mixed with colouring pigment to siut the colour of the tiles including cost and conveyance of all materials to site and all labour charges etc complete |
| 18 | Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data) |
| 19 | Flooring ceramic tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data) |
| 20 | Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes 150mmX 150mmX 6mm set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., |
| 21 | Towards the cost of steel door of size .9 mx2.4m including all charges etc. |
| 22 | Towards the cost of steel door of size 0.75mx1.5 m including all charges etc. |
| 23 | Towards the cost of steel door of size 1.10mx2.4 m including all charges etc. |
| 24 | Towards the cost of steel ventilator of size 0.9x0.45 m including all charges etc. |
| 25 | Towards the cost of steel window of size 1.8m*1.6m including all charges |
| 26 | Towards the cost of steel Window of size 1.5mx1.6 m including all charges etc. |
| 27 | Towards the cost of jolly including all charges etc. |
| 28 | Painting two coat with approved quality of distemper with colour over one coat of white cement for primier coat for the base including preparing surface and all materials cost labour etc |
| 29 | Painting two coat with ready mixed plastic emulsion of first quality paint and of approved colour over a priming coat including thorogh scarpping clean removal of dirt etc complete. |
| 30 | Painting two coats using Ist quality readymix enamel paint of approved colour over new iron work including cost and conveyance and all labour charges etc. |
| 31 | Light point |
| 32 | Fan point |
| 33 | Celling fan |
| 34 | plug point |
| 35 | CFL lamp |
| 36 | Tube light fitting |
| 37 | DPI Switch |
| 38 | Gi pipe |
| 39 | Service wire |
| 40 | Bulk head fiting |
| 41 | 500 liters tank |
| 42 | 25mm upvc pipe |
| 43 | 25mm upvc elbow |
| 44 | 25mm upvc bend |
| 45 | 25mm upve tee |
| 46 | 110mm pvc pipe |
| 47 | 110mm pvc tee |
| 48 | 110mm pvc elbow |
| 49 | 15mm down tap |
| 50 | Urinal flat |
| 51 | Wash basan |
| 52 | cost supply of cudappah slab inculding labour charges etc |
| 53 | provision for lock key |
| 54 | provision for SS hand rails |
| 55 | rain water Harwesting charges |
| 56 | provision for Bala painting |
| 57 | Rain water down fall |
| 58 | Provision For Name board |
| 59 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender