Tender For Electrical And Mechanical Installation For Deep Tube Well Pumping Station At Chandpore Pally Area Ward No 17 Under North Dum Dum Municipality.
Tender Value
3.23 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
15 days left
EMD
6461
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Electrical And Mechanical Installation For Deep Tube Well Pumping Station At Chandpore Pally Area Ward No 17 Under North Dum Dum Municipality.
BOQ
| Sl. No. | Item Description |
| 1 | S&D at site of Sub pumping machineries set directly coupled with 3 ph 400 V (+-10%), 50 HZ AC, RPM - 2900 wet winding type sub motor having Cr. Steel impeller and SS Shaft, Capacity 110 - 50 m3/hour Head range 40 - 60 m (Nominal head 50m), P - 20 HP and delivery size 100 - 125, as per direction of EIC. |
| 2 | Supply of E.R.W.M.S. (Electrical Resistence Welded M.S.) black pipe of ISI Mark as per relevant I. S. Specification (heavy quality) having wall thickness not less than 5.4 mm (NB. The rates for supply of TATA make pipe will be arrived at by adding 20% of the corresponding rate) 150 mm diameter. |
| 3 | Supply and Fitting of M.S. flange(Slipper type) as per IS - 6392 table -17, thickness - 12 mm, 150 mm diameter |
| 4 | S & D of Submersible flat Copper cable of 3 core 6 sq mm 1100 V grade MK - Finolex. |
| 5 | Supply of M.S. Short Piece 75 mm x 150 mm dia one end threaded and one end flanged, 300mm long |
| 6 | Supply of M.S. Rest Clamp Along with Nut & bolt |
| 7 | Supply of M.S. Fabricated Suitable Tubewell cover for the Tubewell showing pipe with necessary clamping arrangement including holes for col. Pipe cable entry etc. |
| 8 | Supply of pump motor protective device cage type(galv iron) comprising of wire rope clamp etc as per direction of EIC. |
| 9 | S & F of safety clamp for the P/M Set 6 mm x 40 mm section |
| 10 | Flange joint to CI/DI/MS pipes and specials including supply of rubber gusket, nuts, bolts, washers etc of quality to make joint water tight as required hudraulic pressure and direction of EIC. |
| 11 | Installation of pumping machinery with valves, pipe & pipe specials short piece, depth gauge, pressure gauge including hoisting of column pipe making all electrical and water line inter connection complete as per direction including supply of necessare materials as required for the work (Including transportation cost). |
| 12 | Manufacturing fittings and fixing both side door fedder pillar M. S. panel box with powder coat finish including fittings ad fixing the materials (a) 32 amp 3 pole 220 volt A,C. panel mounted contractor with no/nc - 3 nos, (b) 17-25 amp thermal over load relay - 1no., (c) Star Delta Timer panel mounted 220 vac - 1 no. (d) Auto Timer (digital) - 1 no. (e) Single Phasing Preventor - 1 no. (f) M. C. B. 10 ampere - 1 no., (g) M.C.B. fixing G.I. channel (32 mm wide) - 1 no. (h) 6 pole 63 amp N.B.C. type connector - 1 no. (i) M. C. C. B. 125 ampere - 1 no., (j) Foreceiling Kit Kat fuse 100 ampere - 3 nos., (k) Flexible copper wire 1.50 sq mm. - 90 mtr (l) Flexible copper wire 16 sq mm. - 15 mtr (m) Various type sockets (ring socket, fork socket, pin socket,) - L.S.. (n) P. V. C. tape - Red, Yellow, Blue, Black. - L.S. (o) Current coil (CT) (60/5). -3 nos (p) Volt meter (0--500 V) 100 mm dia. - 1 no. (q) Ampere meter (0-60) 100 mm dia. - 1 no. (r) Selector switch (volt). - 1 no. (s) Selector switch (ampere), - 1 no. (t) Auto manual selector switch, - 1 no. (u) Indicator lamp (l.e.d) - 5 nos, (v) on-off switch (push button) - 1 no., (w) 1/2\\" Pressure Gauge (0-7 Kg) 100 mm Diameter, (x) Labour charges. |
| 13 | Earthling arrangement in compliance with I.E. Rule by G.I.Pipe (50mm dia) 2 Nos, lowering underground level and connection by G.I. Wire to earth busbar and connection from busbar to all electrical item as per direction of E.I.C. |
| 14 | Testing of the entire pumping machinery as per specification |
| 15 | Sub Total |
| 16 | GST 18% |
| 17 | CESS 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender