Tender For Electrical Installation Works For Supply And Installation Of 229 Nos Hydraulic With (Electro-Mechanical Technology) Two Level Car Parking System ( Total 458 Nos Car Space) At Akanksha Housing Complex At New Town Rajarhat At Plot No. Db-2 A
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Oct 2026
17 days left
EMD
52000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Electrical Installation Works For Supply And Installation Of 229 Nos Hydraulic With (Electro-Mechanical Technology) Two Level Car Parking System ( Total 458 Nos Car Space) At Akanksha Housing Complex At New Town Rajarhat At Plot No. Db-2 Action Area Id
BOQ
| Sl. No. | Item Description |
| 1 | Switchgears & Distribution SystemSupplying and fixing 415V, 100A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make-L&T, Havells, Simens) (For 7 Nos Block) |
| 2 | Supplying and fixing 4 Way MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. incl. Supplying and fixing 16A 4P 415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionMake- Legrand/Crabtree/Seimens) (For 7 nos Block panel Outgoing) |
| 3 | Supplying and fixing 4 Way MCB enclosure with IP-65 protection,Conform to EN 60439-3 Weatherproof cabinets - IP 65 - IK 09 - Class II (Model No- 6019 94) 4 Module Door and cabinet fully reversible, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. with Supplying and fixing 16A 4P 415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionMake- Legrand/Crabtree/Seimens) (External Power Pack) |
| 4 | Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991)(Dimension of Sheet Metal Box- 500mmX150mm) (For 7 Nos Block)4 bars, 415 V, 100/125 A. Dimension of Cu. bars [85mm long-4 x 15x3mm] |
| 5 | Cable,wire and sockets with layingSupplying and delivery of following size Armoured cables XLPE/PVC insulated are designed for 1.1 kV Stranded Aluminium conductor, high tensile galvanized steel wire/strip armour for mechanical protection, and PVC/FR PVC outer sheathing power cable of following size. 4 core 10 sqmm( Make : KEI/Havells/ Polycab/ Glowstar ) |
| 6 | Supplying and delivery of following size Armoured cables XLPE/PVC insulated are designed for 1.1 kV Stranded Aluminium conductor, high tensile galvanized steel wire/strip armour for mechanical protection, and PVC/FR PVC outer sheathing power cable of following size. 4 core 50 sqmm( Make : KEI/Havells/ Polycab/ Glowstar ) |
| 7 | Supplying & fixing 25 mm dia medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required . |
| 8 | Supplying & fixing 40 mm dia medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required . |
| 9 | Excavation of soil and laying HDPE/GI Pipe for cable laying filling & ramming.(0.150x0.450xTotal Length of pipe laying (WxDxL) |
| 10 | Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core |
| 11 | Laying of one cable upto 150 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand |
| 12 | Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting |
| 13 | Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting |
| 14 | Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required4 x 56/0.3 (4 sqmm) + 2 x 36/0.3 (2.5 sqmm) ECC |
| 15 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as belowa) 4 core 50 sqmm |
| 16 | b) 4 core 10sqmm |
| 17 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials a) 4 core 50 sqmm |
| 18 | b) 4 core 10sqmm |
| 19 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. A) 2.5 sqmm |
| 20 | 4 sqmm |
| 21 | EarthingEarthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe |
| 22 | Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil |
| 23 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required |
| 24 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe |
| 25 | Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages 4 SWG |
| 26 | Add. G.S.T.@ 18% (on Total from item no 1 to 25) to be calculated by bidder |
| 27 | Add. LWC.@ 1% to be calculated (on total from item no 1 to 25 + GST@18%) by bidder Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender