Tender For Providing Indoor Badminton Court, Boundary Wall, Paver Block And Other Miscellaneous Civil Works At Primary Health Centre (Phc), Pumpapur And Government School, Dharampur Under Corporate Environmental Responsibility (Cer) Of Jagannathpur Ocp, B
Tender Overview
Project Description
Tender For Providing Indoor Badminton Court, Boundary Wall, Paver Block And Other Miscellaneous Civil Works At Primary Health Centre (Phc), Pumpapur And Government School, Dharampur Under Corporate Environmental Responsibility (Cer) Of Jagannathpur Ocp, Bhatgao
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: 1:2:4 ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level : 1:1 1/2 :3 ( 1 Cement : 1 1/2 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 4 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of cetring, shuttering, finishing and reinforcement - all work upto plinth level. 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3graded stone aggregate 20 mm nominal size) . |
| 5 | Reinforcement for RCC work including straightening, cutting bending, placing in position and binding all complete. |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form work for :Retaining walls, return walls, walls (any thickness) including attached pilasters,buttresses, plinth and string courses fillets, kerbs and steps etc. |
| 7 | Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 8 | Brick work with fly ash bricks in foundation and plinth in Cement mortar 1:4 (1 cement : 4 sand) |
| 9 | Brick work with flyash brick in superstructure from P.L. to floor V level in cement mortar 1:4 ( 1 cement : 4 sand ) |
| 10 | 12 mm cement plaster of mix1:6 (1 cement: 6 fine sand) |
| 11 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 12 | Applying priming coat. With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat). |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 14 | Colour washing such as green, blue of buff to give an even shade : New work ( two or more coats) with a base coat of white washing with lime. |
| 15 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 40mm thick with 20mm nominal size stone aggregate. |
| 16 | Providing and finishing badminton court with rubber paint with approved brand . Two or more coat |
| 17 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 18 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %),total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. |
| 19 | Extra for providing and fixing wind ties of 40x6 mm flat iron section |
| 20 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. 16.70.1 Made of G.I. wire of dia 4 mm |
| 21 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender