Defence Statutory Bodies & Commissions/Committees Closing in 20 days TDR #57665252

Tender For Provn Of Overhead Shelters For Various Check Posts And Steel Gate (02 Nos) In Cp-5 And Cp-9 At Under Age B/R-Ii Of Ge (East) Jalandhar Cantt (Tender Id No 2026_Mes_790731_1)

Issued by Statutory Bodies & Commissions/Committees · Jalandhar, Punjab
Tender Value
47.35 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
20 days left
EMD
94718
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provn Of Overhead Shelters For Various Check Posts And Steel Gate (02 Nos) In Cp-5 And Cp-9 At Under Age B/R-Ii Of Ge (East) Jalandhar Cantt (Tender Id No 2026_Mes_790731_1)

BOQ

Name of Work:- Provn of overhead shelters for various check posts and steel gate (02 Nos) in CP-5 and CP-9 at under AGE B/R-II of GE (EAST) Jalandhar Cantt (Tender ID No 2026_MES_790731_1)
Sl. No. Item Description
1Excavation in post holes (or similar holes) in soft/loose soil, each not exceeding 0.50 cum and getting out, returning, filling in and well ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, including watering and removing surplus soil to a distance not exceeding 50m away from the starting point and making good surfaces, complete all as specified and as directed.
2M&L for PCC (1:2:4) type B-2, (using 40mm graded crushed stone aggregate) as in foundation, mass fillings for posts/struts etc, complete all as specified and as directed.
3M&L for Rolled sections as in vertical member, rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W(GdeE-250) quality A, complete all as specified and as directed by Engr-in-Charge.
4M&L for mild steel plate plain, square/rectangular cut welding to base of hollow pipes etc, complete all as specified and as directed.
5M&L for compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, inlcudings all lattice bars, complete all as specified and as directed.
6S&F for 20mm dia rag bolts 450mm length with nut & washer one side of J Hook type complete all as specified and directed.
7S&F TMT bars 10mm dia and over cut to length bent to shape required including binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed
8Ditto all as per item No 7 above, but 6mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, complete all as specified and as directed.
9S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering cladding to wall, fixed with self drilling screwsas , complete all as specified and as directed.
10S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering cladding to wall, fixed with self drilling screwsas, complete all as specified and as directed.
11M&L for preparation of steel surfaces exceeding 10 cm with or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.
12Surface excavation n exc 30cm deep and averaging 15cm deep in soft/loose soil , complete all as directed by Eng-in-charge.
13Materials and labour for broken stone or boulder hard core of gauge n.exc, 63mm deposited spread and leveled in layers n.exc 15cm thick watered and rammed to a true surface, complete all as specified and as directed.
14M&L Cement concrete type C-2, 1:3:6( 20 mm grade agg) 100 mm thick as in sub base of flooring, complete all as specified and as directed.
15M&L 25 mm thick sand cushion, filling under floors or in foundations including watering and consolidation, complete all as specified and as directed.
16M&L for laying 60 mm thick machine pressed PVC moulded vibratory coated glossy finish precast concrete interlocking paver block any shape and size conforming to IS -15658-2006 of M-35 Grade with grey cement and pigment, complete all as specified and as directed. NOTE: The sample shall be got approved from the GE before bulk procurement and lots shall be got tested independtly by the GE.
17M&L for factory made PVC moulded vibratory coated glossy finish chequered cement concrete tiles 30cm x 30cm x 18 to 20 mm thick set with grey cement and pigments jointed and pointed in neat coloured cement slurry in floors over and including 15 mm thick cement screed bed in cement mortar (1:6) including demolition of old tiles/concrete floor, complete all as specified and as directed.
18M&L PCC (1;2:4) type B-1 using 20mm graded stone agregete as in sides of rounded or chamfered on edges of interlocking tiles, complete all as specified and as directed.
19Taking down cement plaster of any description thickness including raking out joints hacking for key scrubbing down with water, complete all as directed by Eng-in-charge.
20M&L for 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even, complete all as specified and as directed. (WPC shall be measured and paid separately under appropriate item of this BOQ).
21M&L for preparation of new surfaces of walls including cornices, plasters etc (Plastered or unplastered surfaces) and applying two coats of cement base paint, complete all as specified and as directed.
22\\"Supply only\\" integral water proofing compound ISI marked, complete all as specified and as directed.
23Demolition of brick work as in walls/parapet wall,s removing grass fungus weed, roots of trees completely, grown on roof/wall surfaces, complete all as directed by Eng-in-charge.
24M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6 M mean radius built in CM (1:6), complete all as specified and as directed.
25Ditto all as per srl item No. 24 above but except bricks, complete all as specified and as directed.
26Excavation in trenches n.exc 1.5m wide n.exc 1.5m deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 Sqm on plan and n.exc 1.5m depth and getting out in hard dense soil, complete all as directed by Eng-in-charge.
27M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and as directed.
28Formwork to sides of concrete foundation, footings, base of columns, raft and raft beams, sides and soffits if any of foundation and plinth beams and similar work, vertical or to better of rough finished surfaces of concrete of flat, complete all as specified and as directed.
29Use and waste of form work to sides of square, rectangular or polygon in shape columns, pillars, posts, rough finished surface of concrete, complete all as specified and as directed.
30M&L M-25 Grade concrete with 20mm grade crushed stone aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed.
31M&L M-25 Grade concrete (using 20mm grade crushed stone aggregate) of design mix as in columns, complete all as specified and as directed.
32M&L for rendering 15mm thick on fair faces of brickwork or concrete surfaces finshed fair and even in CM 1:4, complete all as specified and as directed.
33M&L for brickwork old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in in cement mortar CM 1:6, complete all as specified and as directed.
34S & F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165, complete all as specified and as directed.
35Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and as directed.
36Removing excavated material exc. 250m and n exc 500m, depositing where directed at a level n exc. 1.5m above the starting point, complete all as directed by Eng-in-charge.
37M&L for 18 to 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screedand jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grindingand polishing complete like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade over and including 10mm thick CM (1:4) back coat layer, complete all as specified and as directed.
38Removal excavated surplus soil to a distance n.exc. 50 m and depositing where directed at level n.exc. 1.5 m above the starting point, complete all as directed by Eng-in-charge.
39M&L 75mm thick cement concrete 1;4:8 type D2 (using 40mm grade aggregate) as in sub base of floors , complete all as specified and as directed.
40M&L for filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops etc section of fillet exc 25 but n.exc 50 Sqcm, complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57665252
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 47.35 Lakhs
LAST DATE 14-10-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provn Of Overhead Shelters For Various Check Posts And Steel Gate (02 Nos) In Cp-5 And Cp-9 At Under Age B/R-Ii Of Ge (East) Jalandhar Cantt (Tender Id No 2026_Mes_790731_1)
Basic Detail
Tender No GE/JULL/ET-63/2026-27
Bidding Type Tender
Location
City Jalandhar
State Punjab
Key Dates
Publish Date 23 Sep 2026
Submission Date 14 Oct 2026
Open Date 17 Oct 2026
Finance
Tender Value 47.35 Lakhs
Tender Fee 500
EMD 94718
Exemption Available
Document List
a2cf69e0-3a6d-42c4-a650-3650a3e07060.html
BOQ_886504.xls
Tender63.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 23, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 14, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 20 days
Oct 17, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 23 days

Tender Documents

Download All (ZIP) ↓
html

a2cf69e0-3a6d-42c4-a650-3650a3e07060.html

xls

BOQ_886504.xls

pdf

Tender63.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders