Tender For Provision Of Bathroom Cum Toilet For Agniveer Women & Improvement Of Roof Sheet And Truss Of Bldg No. P- 728 & Provn Of Anti-Suicide Fan Rods At Smqs And Single Accn Of Air Warriors At Af Stn Jodhpur
Tender Value
1.97 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
21 days left
EMD
39500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Bathroom Cum Toilet For Agniveer Women & Improvement Of Roof Sheet And Truss Of Bldg No. P- 728 & Provn Of Anti-Suicide Fan Rods At Smqs And Single Accn Of Air Warriors At Af Stn Jodhpur
BOQ
| Sl. No. | Item Description |
| 1 | M& L for Surface dressing of soft and loose soil n exc 15 cm deepas specified and directed. |
| 2 | Excavating post holes or similar holes, each not exceeding 0.5 Cu. M, getting out in Soft/ disintegrated soil and removing surplus soil to a distance n.exc 50m & making good surface |
| 3 | Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and as directed |
| 4 | Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre in soft/loose soil complete all as specified and as directed. |
| 5 | Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed |
| 6 | Forming embankments including raising(or lowering) earth, spreding in layers n exc.30cm thick;watering,rammin/ rolling and finishing to required size,shape. |
| 7 | M&L for broken stone boulders of hard core of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified. |
| 8 | M&L for PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, Cement concrete in foundations, filling and mass concrete surface finished fair and even, complete all as specified & directed. |
| 9 | Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete. |
| 10 | \\"M&L for Pre-cast cement type C1 1:3:6 20mm agraded stone agrregate concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar,complete\\" |
| 11 | M&L for 15mm thick rendering in cement mortar (1:6) on brick work or concrete surfaces of walls, finished the surface even & smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. |
| 12 | M&L for Damp proof course in Cement concrete (1:2:4)Type B0 20mm aggregate 40mm thick to horizontal or vertical surfaces including necessary formwork |
| 13 | M&L for 100mm thick PCC (1:2:4) typeB-2 using 40mm graded stone aggregate in sub base etc finishing cement concrete surface even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 14 | M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6), complete all as specified and directed. |
| 15 | M & L for Glazed ceramic tiles in vertical surface 350x 250x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 15mm thick cement mortar 1:4 rendering |
| 16 | M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of zinc chrome primer, complete all as specified & directed by Engr-In-Charge. |
| 17 | S&F anodized aluminium frame for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed. |
| 18 | S&F aluminium anodised powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (3 Nos.) suitable handle (1 no.), complete, all as specified & directed. |
| 19 | S&F 4.0mm thick sheet glass, ordinary quality, coloured/tinted/silver finish and glazing with oil putty including rubber beading cleats etc in square n exc 0.5 sqm in each pane complete all as specified and as directed |
| 20 | M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate in plinth protection, sub base etc finishing cement concrete surface even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 21 | S & F Mild steel roof trusses (framed), Trussesd, purlins, crane grantries, rails and framings and heavy bracket framing (Beam,tee, angle, channel or flat sections) confrming to Fe 410-W including cleats,distance pieces etc |
| 22 | Preparation of new steel surfaces and applying two coats of epoxy anti corrossive paint over a coat of zinc primer |
| 23 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed . |
| 24 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed . |
| 25 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer all as specified & as directed. |
| 26 | M&L for preparation of plastered surfaces of walls and applying two coat of cement base paint of approved shade/tint, complete all as specified & directed. |
| 27 | S & F 110 mm PVC(SWR) dia pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-in-charge Make prince/supreme |
| 28 | S & F 75mm PVC(SWR) dia pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-in-charge Make prince/supreme |
| 29 | S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube and edgeswill be painted to match will printed sheet fixed in opening as per specification & drawings complete all as specified and as directed. |
| 30 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete, all as specified & directed. |
| 31 | S&F Mild Steel Butt hinges, medioum weight, cold rolled, of size 100 mm complete all as specified and directed. |
| 32 | S&F 150 mm long aluminium handle east type with bright bolt complete all as specified and directed. |
| 33 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 250 mm complete all as specified and as directed. |
| 34 | S&F Aluminium anodized, barrel tower bolt of extruded section, length of bolt 150 mm complete all as specified and as directed. |
| 35 | M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) rough finished flat concrete surfaces |
| 36 | M&L Pre-cast cement concrete cover slab for manhole and drain cover in plain cement concrete 1:2:4 type B-1, (using 20 mm graded stone aggregate) set in cement mortar 1:4 with plain faces complete all as specified and as directed |
| 37 | TMT Bars 10 mm dia and over cut to length bent to shape reqiured, incl cranking, bending spirraly for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9m dia or securing with clips. |
| 38 | M&L for 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed of granite including and over 15 mm thick screed bed or bedding layer of mortar 1:6. |
| 39 | S & F viterous China Wash Hand Basin white,counter top size 570 x 420mm including 15mm dia pillar tap, cast copper alloy, with capstan head cp, screwed down high pressure with or without letter Hot or Cold with long screwed shank and fly nut including PVC waste pipe 32mm bore and PVC connection suitable for 15mm bore pipe 60cm long with nut and washers at both ends and cp waste coupling, chain and plug and porcelain stopper including mild steel brackets, made out of 25 by 25 by 3mm thick angle iron of required length fixed to wall with PCC type B-0 (1:2:4) including cutting for a pinning in a brackets complete all as directed by Engr-in-Charge. |
| 40 | S & F for PVC low level flushing cistern 10 Ltr capcity Valve less duel symphonic action type, flushing cistern , low level white, with inlet ball valve flat and handle including PVC flush pipe 32mm bore and complete all as directed . |
| 41 | S & F hand shower (health faucet) ABS body mile steel chromium plated for 15mm dia, 1.25meter long flexible tube and ABS wall hook including making connections and fixed in postion complete in all respect as specified. |
| 42 | S & F viterous China Wash down water closet Pan 'Pedestal Pattern' white with seat cover white closet pattern with flat battom and cover mild steel chromium plated or aluminium anodised hinging device and joints etc and connection to drain, flushing ,pipe, anti symphonage pipe and fixing arrangements with fixing bolts etc including making good the disturbed portion of floor in cement concerete 1:2:4 type (B-0) complete all as directed . |
| 43 | S & F squatting pan vitreous china orrisa pattern of Size 580mmx440mm \\"white\\" with integral foot rest (Excluding flushing cistern and flush pipe) including provision of cement concrete bedding, connection to trap and to flushing pipe, anti-syphonage pipe etc complete making good to floor complete |
| 44 | S & F for PVC waste coupling 32mm dia PTMT(half or full threaded) suitable for WHB/Sink (min wt 450 gms), completed all as specified & directed |
| 45 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 46 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 600mm long |
| 47 | S & F Tubular Towel Rail 600mm long PTMT fixed with and including Chromium Plated brass screws and wooden/plastic cleats(Minium weight 90 gm) |
| 48 | S&F in repairs Soap dish, viterous china white approximate size 160X160X90mm complete all as specified & directed |
| 49 | S&F Toilet paper holder , viperous china box type complete all as specified & directed |
| 50 | S&F in repairs in repairs Grating doom 125mm dia with waste hole of PTMT and CP complete all as specified & directed (Minium weight 40 gm) |
| 51 | S&F PVC connection 15 mm dia 600mm long with 2 Nos PVC check nuts with washer complete all as specified and directed. |
| 52 | S&F 15mm dia of fancy type chromium plated Angle stop valves, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for unions and fixed complete all as specified and directed. |
| 53 | S&F 15 mm dia bib tap cast copper alloy CP fancy type with capstan head long body and cup screwed down for iron pipe all complete all as specified and directed. |
| 54 | M&L for Non asbestos fibre cement building boards 4-6mm in thickness fixed or laid/ inserted to timber/GI/Aluminium frame work with screws along with Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm all as specified and directed. |
| 55 | S & F 500 liters rotational moulded polyethylene water storage tank, double layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet and ball valve(float valve) complete as specified. |
| 56 | Supply and laying 15 mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed. |
| 57 | Supply and laying 20 mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed. |
| 58 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings sheeting any guage thickness incl Nainital pattern as in roof covering complete all as specified |
| 59 | S&F for pre-painted galvalume aluminium zinc cozting GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 60 | Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified & directed |
| 61 | M&L for taking down carefully ceiling fans with fan down rod of any length by disconnecting electrical connections and fixing the same with new Anti suicide fan down rod 10 inch (off white color), hanging fan and making necessary electrical connectinons, testing fan for its smooth functioning. Antisucide Fan rod shall manufactured with inbuilt spring so as to brake and hang on spring when load on fan exceeds 20 kg. Fan rods shall be tested and approved by Govt of India MSME Labotary all as specified and directed. |
| 62 | M&L for taking down carefully ceiling fans with fan down rod of any length by disconnecting electrical connections and fixing the same with new Anti suicide fan down rod 15 inch (off white color), hanging fan and making necessary electrical connectinons, testing fan for its smooth functioning. Antisucide Fan rod shall manufactured with inbuilt spring so as to brake and hang on spring when load on fan exceeds 20 kg. Fan rods shall be tested and approved by Govt of India MSME Labotary all as specified and directed. |
| 63 | M&L for taking down carefully ceiling fans with fan down rod of any length by disconnecting electrical connections and fixing the same with new Anti suicide fan down rod 18 inch (off white color), hanging fan and making necessary electrical connectinons, testing fan for its smooth functioning. Antisucide Fan rod shall manufactured with inbuilt spring so as to brake and hang on spring when load on fan exceeds 20 kg. Fan rods shall be tested and approved by Govt of India MSME Labotary all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender