Tender For Provn Of Certain Air Raid Shelters At 1 Wing Af Stn Srinagar
Tender Value
97.08 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
34 days left
EMD
1.70 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Certain Air Raid Shelters At 1 Wing Af Stn Srinagar
BOQ
| Sl. No. | Item Description |
| 1 | Sch 'A' Part-I (Building Works)Provn of certain Air Raid Shelters permanenet specification of all as per drawing and directed by Engineer-in-Charge.Note: Prepriced at par with SSR Part-II (2020) at Serial Page No 20 and contractor has to quote the estimated amount under Col 6 |
| 2 | Sch 'A' Part-II (Sec-I) (Internal Electric Supply)Note: Prepriced at par with SSR Part-II (2020) at Serial Page No 22 and contractor has to quote the estimated amount under Col 6 |
| 3 | Sch 'A' Part-II (Sec-II) (Internal Electric Supply)Note: This schedule is not pre priced by MES and the pre priced rate indicated as \\"Rs.0.00\\" under Col 5 signifies this fact only. |
| 4 | Supply & Fix Wall Mounted fan AC single phase 230 volts of size 300mm swap 1360 rev/min with blades and frame and louvers complete all as specified and directed. |
| 5 | Sch 'A' Part-III ( Road, Path & Culvert)Note:- Prepriced at par with SSR Part-II (2020) at Serial Page No 24 and contractor has to quote the estimated amount under Col 6 |
| 6 | Sch 'A' Part-IV (Sec-I) ( External Electric Supply)Note:- Prepriced at par with SSR Part-II (2020) at Serial Page No 26 and contractor has to quote the estimated amount under Col 6 |
| 7 | Sch 'A' Part-IV (Sec-II) ( External Electric Supply)Note:- This schedule is not pre priced by MES and the pre priced rate indicated as \\"Rs.0.00\\" under Col 5 signifies this fact only. |
| 8 | Suppl and laying unreinforced pre cast concerate cable cover confirming to IS: 5820 with minimum average breaking load capacity 200 KGs for unreinforced covers , class LV Type 1, flat size 250mmx 150mmx40mm complete all as specified and directed |
| 9 | Supply, install, testing and commissioning and testing factory made and tested CPRI type test certified LT feeder pillar box (KIOSK) out door type, floor mounted,compertmantalised suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, dust and vermin proof, made of 3.15mm CRCA MS sheet with digital Volt meter, Ammeter, with CTs ,Led lamps RYB for all incomers & outgoings MCCBs are to busbar spadles to fitted complete base frame of 50x50x6mm angle iron, powder coated, having front and rear openeable hinged double door shutters with aprons for cable entry and locking arrangement complete with following :- Incoming (a) MCCB 100 amps,4 pole, 25 KA , with adjustable thermal over load release 50 Hz, 415 volts grade - 01 Nos. (b) Bus bar electrolytic grade Aluminium and supported on Non-hygroscopic, non carbonising, corrosion resistance SMC insulators 200 Amp,4 pole, not less than 75 cm long mounted on insulators 01 set |
| 10 | Supply and fix Ligtning lightining conductor/Protection Rod with following specifications:-a) Height of primary terminal = 1000mm b) Diameter of Rod = 22-25 mmc) Tip of Rod = Tapered tip/Sharp Edged) Scondary Terminal = Shall attached to bowle) Dimension of Bowl = 125 mm wide x 4mm thickf) Direction = Facing the primary terminal on 4 sidesg) Electrolyte = Copper h) Additional protection = Nickel plated tip for corrosion resistance & side flash capturei) Confirmation = IEC 62305j) Weight = 6.0 Kgsk) Construction :- Protection system shall consist of one primary and four secondary air terminals. The Primary air terminal is a vertical conductive rod having a sharp tip at one end. The secondary air terminal (4 No) formed on a bowl shaped circular disc are fixed on vertical rods. further, the actual points of the secondary terminals are spaced and placed in such a way to receive the maximum side flashes. Work shall be excuted all as specified & directed by Engr-in-Charge.l) ISO Certification = ISO 9001 : 2015m) Current Capacity (Tested) = 40 Kan) Dia of SFCH (mm) = 125o) Base Plate dimension (mm) = 150 x 150 x 6 Make:- Ashlok(Zeus)/Baron/Macmate |
| 11 | Supply , installation testing & commissioning of maintenance free compound based electrode earthing with following Specificationsa) Type = Copper Bonde Rodb)Material = Low carbon steel core (SAE 1018)c) Length = 3000mmd) Dia of rod = 17mme) Coating Thickness = 250 micronsf) Terminal = U Bolt Clamp or equivalentg) Tolrence in length = ± 20mmh) Tolrence in diameter = ±1.0mmi) Torence in thickness = ±0.03mmj) Current with stand = 10 KA for 1.0 sec and 25 KA peakk) Frequency = 50 Hzl) Back fill compound = BARON ELECTRODITE (ROHS Certification)m) PIT Cover = FRP (or) EPCCn) Granular material resistance = 0.001 Ohmo) Mixer ratio with cement = 3:1NOTE:- Electrode top terminal shall be sealed permanently packed with conductive concrete and CU bonded strip taken out be terminated on earth test point and equipped terminalMAKE:-Ashlok(Zeus)/Baron/Macmate |
| 12 | Suppply and fixing single core 25 Sqmm copper multistandred conductor PVC insulated and unsheathed (FRLS) Earth wire using ISI Marked IS 694 1100 volts grade PVC insulated flexible stranded copper conductor wire'. |
| 13 | Sch 'A' Part-V ( Area Drainage)Note:- Prepriced at par with SSR Part-II (2020) at Serial Page No 28 and contractor has to quote the estimated amount under Col 6 |
| 14 | Sch 'A' Part-VI ( Site Clerance)Note:- Prepriced at par with SSR Part-II (2020) at Serial Page No 29 and contractor has to quote the estimated amount under Col 6 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 34 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 39 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender