Tender For Comprehensive Maintenance Ofsecurity Light, Garden Light And Allied Services In The Aor Of Age E/M Division Under Ge (Nw) Mankhurd.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Oct 2026
20 days left
EMD
97000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance Ofsecurity Light, Garden Light And Allied Services In The Aor Of Age E/M Division Under Ge (Nw) Mankhurd.
BOQ
| Sl. No. | Item Description |
| 1 | M&L in repair for Cleaning, preparation and painting of lift motors, hoists, gear boxes, motor bases and associated metallic components, including removal of rust, grease, oil and loose paint by wire brushing/scraping, application of suitable anti-corrosive primer and approved finishing paint in two coats, taking necessary precautions to protect electrical components, nameplates, bearings and moving parts, complete in all respects all as specified and as directed by Engr-in-charge. |
| 2 | Supply, fixing, testing & commissioning in repair of 1 HP single-phase openwell submersible pump (Crompton OWE12(1PH)Z-28 or equivalent) for removal of accumulated water from lift well/pit, including necessary delivery hose/pipe, electrical connections, shifting, lowering and lifting of pump, pumping out and disposal of water, and all incidental works complete as directed by the Engineer-in-Charge. |
| 3 | M&L in repair for 0.5 HP pressure booster pump, Crompton IPSSWJ052 or equivalent, suitable for 15–25 m head, for maintaining pressure in the fire-fighting water supply system, complete with necessary connections, fittings, controls electrical connections, and all incidental works, complete as directed by the Engineer-in-Charge. |
| 4 | M&L for taking out old ERW pipes by excavating from trenches and cutting corroded or wornout portion for repairs and refixing after carryout repairs welding/jointing and relaying in trenches after repairs including applying a coat of red oxide and the coat of post after red colour paint complete all as trenches of pipes for the following bore all as specified and directed by Engr-in-charge. |
| 5 | Ditto all as per Item No. 4 but of size 200 mm complete |
| 6 | Ditto all as per Item No. 4 but of size 150 mm complete |
| 7 | Ditto all as per Item No. 4 but of size 100 mm complete |
| 8 | Ditto all as per Item No. 4 but of size 80 mm complete |
| 9 | Supplying, fixing, jointing and testing, ISI marked heavy grade, Class C, MS ERW pipe conforming to IS: 1239-1982, including fittings such as coupling, bends, elbow and tee screwed/flanged joints, nuts & bolts, rubber packing rings,fixed on wall, hanged with ceiling through clamps, hangers, brackets, pipe supports, U bolts on MS brackets with anchor fasteners all as directed and appliying 2 coats of synthetic enamel paint over a coat of zinc dichromate primer, etc as per the site requirement in long/short pieces all as specified and directed by Engr-in-charge. Make :- Tata/ Jindal / BST/ Oswal |
| 10 | Ditto all as per Item No. 9 but of size 200 mm complete |
| 11 | Ditto all as per Item No. 9 but of size 150 mm complete |
| 12 | Ditto all as per Item No. 9 but of size 100 mm complete |
| 13 | Ditto all as per Item No. 9 but of size 80 mm complete |
| 14 | S&F in repair sluice valve of, cast iron body, flanged drilled end, conforming to IS-14846, ISI marked, class PN 1.6, reselient seating as well as metal seating Fusion bonded epoxy coating including all joints with rubber gaskets, bolts and nuts, washers, iron wheel including taking up / down old unserviceable valves from any position and any addition / alteration for fixing required complete all as specified and as directed. Make :- Kirloskar / Leader / Kartar / Upadhyay |
| 15 | Ditto all as per Item No. 14 but of size 200 mm complete |
| 16 | Ditto all as per Item No. 14 but of size 150 mm complete |
| 17 | Ditto all as per Item No. 14 but of size 100 mm complete |
| 18 | Ditto all as per Item No. 14 but of size 80 mm complete |
| 19 | S & F in repair cast iron Foot valve of 100mm Ball type with flange joint model B-05 (N) conforming to IS with MS nuts bolts, washer, rubber gasket etc., any pattern as approved including taking out / dismantling old unserviceable one and testing complete all as specified and as directed.Make : KIRLOSKAR / UPADHAYA / LEADER |
| 20 | Ditto all as per item No 19 above but 65 mm dia bore complete. |
| 21 | Supply and fixing, in repair Gun Metal, single outlet type fire hydrant landing valve, type A (Single head outlet) ISI marked of size 63mm dia complete with brass spindle cast iron wheel, with rubber gasket, nut,bolt etc and instantaneous coupling ISI marked, confirming to IS 5290 hydrostatic test pressure 23 kg/cm2, minimum operating pressure 7kg/cm2. Make:- NewAge / Essel / Swati |
| 22 | Supply and fix in repair 63 mm dia 15 meter long RRL (Reinforced Rubber Lined) Fire hose with jacket 100% synthetic yarn fabric reinforced conforming to IS 8423:1994 complete with male and female coupling conforming to IS 903 complete all as directed by Engr-in-charge. Make:- NewAge / Essel / Swati / Safex |
| 23 | Supply, fixing, in repair fire hose cabinet box of size as per requirement but not less than 800X600X250 mm, out door type Made out from 18 Gauge MS sheet duly painted with 2 coats of red colour synthetic enamel paint over a coat of redoxide primer with double leafed glazed shutters (Glaged with 4mm thick glass) suitable for housing of 2 length of canvas hose, branch pipe, fire hose and nozzle, fire man axe, first aid hose and single outlet landing valve,including free standing stand made of of MS angle of size 40 mm X 40mm X 5 mm and including pcc foundation of required size but not less than 0.45 mtr height above ground levelincluding dismantling old cabinet hose box complete all as directed. Make :- Vijay / Winco / Ceasefire / New Age |
| 24 | M&L for renewal of valve pit of size up to 80 cm x 80 cm x 80 cm (internal diamension), stone / brick construction including all necessary excavation and earth work in any type of soil, returning, filling in disposal of surplus soil to a distance not exceeding 50 m and depositing where directed, PCC in foundation for mix (1:2:4) type D2 brick mansonary in cement mortar (1:4) rendering 12 mm duck in cement mortar (1:4) internally ,finished even and fair and polishing flush externally as the work proceeds in the same mortor. Mild steel angle iron 40 x 40 x 6 mm frame MS sheet cover 3.15 mm thick with handle and locking arrangement, painting all exposed MS work with two coats of synthetic enamel paint of the that as approved by the Engineer - in - charge over a coat of red oxide primer and painting all the MS embeded in PCC with two coats of black bitumenous paint complete all as specified. |
| 25 | Supply and fixing in repair brass Air release valve of size 25mm dia including all necessary fittings required for fixing complete all as specified and directed. |
| 26 | Supply and fix in repair Pressure gauge of 4\\" dial 0-14 kgs rating with ball valve including taking up / down old unserviceable pressure gauge from any position and any addition / alteration for fixing required complete all as specified and as directed. Make: FIEBIG/ H. GURU/ BAKER MERCER/ DANFOSS |
| 27 | Supply, install, testing and commissioning in repair of sounder /Sirens Electronic type horizontal single stage continuous normal operation for at least 50 minutes with sound level 65 DB to 120 DB measured at 1.5 mtr with sound output variation of +DB 500mtr rage all as specified and directed. –MAKE- GE/Honey Well. |
| 28 | M & L for preparation of existing painted steel pipes, including fire main lines, fire hydrant stand posts, and all exposed GI pipes, by removing the deteriorated paint layer through manual or mechanical scraping using wire brushes, scrapers, or sandpaper. The surface shall be thoroughly cleaned to remove dust, grease, rust, or any contaminants, ensuring an even, bare metal or sound substrate ready for painting and apply one coat of synthetic enamel paint, ensuring uniformity in thickness and adherence as per manufacturer specifications shall comply with IS standards, apply a compatible metal primer on bare metal sections before enamel application to enhance corrosion resistance and paint adhesion complete as per specifications and as directed by the engineer-in-charge. . Make :- Asian, Berger, Apex, or Nerolac Please Enable Macros to View BoQ information |
| 29 | M & L for preparation of existing painted steel pipes, including fire main lines, fire hydrant stand posts, and all exposed GI pipes, by removing the deteriorated paint layer through manual or mechanical scraping using wire brushes, scrapers, or sandpaper. The surface shall be thoroughly cleaned to remove dust, grease, rust, or any contaminants, ensuring an even, bare metal or sound substrate ready for painting and apply one coat of synthetic enamel paint, ensuring uniformity in thickness and adherence as per manufacturer specifications shall comply with IS standards, apply a compatible metal primer on bare metal sections before enamel application to enhance corrosion resistance and paint adhesion complete as per specifications and as directed by the engineer-in-charge. . Make :- Asian, Berger, Apex, or Nerolac Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender