Tender For Comprehensive Maintenance Of E/M Installations And Allied Services In The Aor Of Age E/M Division Under Ge (Nw) Mankhurd.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Oct 2026
20 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance Of E/M Installations And Allied Services In The Aor Of Age E/M Division Under Ge (Nw) Mankhurd.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and not exceeding 10 sqm on plan and getting out in soft/loose soil for laying of cables, etc. complete all as specified and as directed. |
| 2 | Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm deep as in hard/soft soil complete all as specified and as directed. |
| 3 | Removing excavated materials to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point in soil including spreading in low lying area and leveling complete all as specified and as directed. |
| 4 | M&L for cutting existing road/hard standing not exceeding 45x50 cm in wide & depth getting out excavated material for laying GI tube, returning filling & well rammaing watering finish suraface 10 cm from top including provision of PCC 1:3:6 for repairing, including removal of surplus soil all as directed. |
| 5 | M & L for PCC 1:3:6 in round/ square shape as per site requirement of thickness not less than 3\\" suitable for fixing of cast iron tank cover complete all as specified and directed. |
| 6 | Taking up or down steel tubing and connections including cleaning and setting aside for refixing or as schedule of credit, etc complete all as specified and as directed for the 20 mm bore pipes including necessary staging/scaffolding as required. |
| 7 | Ditto all as per item No 6 above but 25 mm dia bore complete |
| 8 | Ditto all as per item No 6 above but 40 mm dia bore complete |
| 9 | Ditto all as per item No 6 above but 50 mm dia bore complete |
| 10 | Ditto all as per item No 6 above but 80 mm dia bore complete |
| 11 | Ditto all as per item No 6 above but 100 mm dia bore complete |
| 12 | Supply & Laying fixing, connecting and testing steel water tubing, medium grade, galvanised, with screwed and socketed joints, in any length, including supply and fixing all fittings, fixed to walls or laid in trenches / floors etc complete all as specified and as directed for the 20 mm bore, ISI marked. Make-: Tata/ Jindal/ BST/ Oswal |
| 13 | Ditto all as per item No 12 above but 25 mm dia bore complete |
| 14 | Ditto all as per item No 12 above but 40 mm dia bore complete |
| 15 | Ditto all as per item No 12 above but 50 mm dia bore complete |
| 16 | Ditto all as per item No 12 above but 80 mm dia bore complete |
| 17 | Ditto all as per item No 12 above but 100 mm dia bore complete |
| 18 | Supply and fix ISI Marked UPVC Pipe size 50 mm nominal dia,pressure pipe Schedule 80 with all connected acessories like UPVC bend,Tees,Unions,Sockets etc for each 3 mtr length of Pipe & solvent to join it all as specified and as directed.Make:Supreme/Dutron/Finolex/Duplon |
| 19 | Ditto all as per item No 18 above but 40 mm dia bore complete |
| 20 | Ditto all as per item No 18 above but 25 mm dia bore complete |
| 21 | Supply, lay/fix, connect and testing DI water tubing of 80 mm bore with spigot and socket ends class K-9 conforming to IS:8329/2000 suitable for rubber tyton joint including taking out old damaged CI main with fitting burning out joints and recovering lead complete etc as specified and directed. |
| 22 | Ditto all as per item No 21 above but 100mm dia bore complete |
| 23 | Ditto all as per item No 21 above but 150mm dia bore complete |
| 24 | Ditto all as per item No 21 above but 200mm dia bore complete |
| 25 | M & L for DI fittings class K-12 conforming to IS:9523/2000 upto 200 mm dia of any type, size, such as bend, tapper, tail piece, tee piece, cross etc complete all as specified and directed. |
| 26 | S&F in repairs gunmetal gate or globe valve for 65 mm dia, conforming to IS-778, ISI marked, with iron wheel head screwed at both ends for iron pipes or ferrule and fixing including necessary fittings like unions, check nuts, etc and any addition / alteration required for fixing, complete all as specified and as directed. Make :- Kirloskar, Upadhaya , Leader, Zoloto. |
| 27 | Ditto all as per item No 26 above but 50 mm dia bore complete. Make :- Kirloskar, Upadhaya , Leader, Zoloto. |
| 28 | Ditto all as per item No 26 above but 40 mm dia bore complete. Make :- Kirloskar, Upadhaya , Leader, Zoloto. |
| 29 | Ditto all as per item No 26 above but 25 mm dia bore complete. Make :- Kirloskar, Upadhaya , Leader, Zoloto. |
| 30 | Ditto all as per item No 26 above but 20 mm dia bore complete. Make :- Kirloskar, Upadhaya , Leader, Zoloto. |
| 31 | Taking out sluice valves of size 80 mm to 100 mm and transporting to workshop for lathe work by refacing, regrinding, metalling and refixing back at site to match with standard size and refixing in position including replacing of worn out gland packing/washers /nuts/ bolts etc for the following size sluice valves.Note : Rate quoted is inclusive of cost of spare parts. |
| 32 | Ditto all as per item No 31 above but for size 150 mm to 200 mm dia bore complete. |
| 33 | S&F sluice valve 80 mm bore, cast iron body, flanged and drilled end, conforming to IS-14846, ISI marked, Class PN 1.6 including all joints with rubber or fibre board, gaskets, bolts and nuts, washers, iron wheel including taking up / down old unserviceable valves from any position and any addition / alteration for fixing required complete all as specified and as directed. Make-: Kartar/ Kirloskar/ Upadhyay |
| 34 | Ditto all as per item No 33 above but 100 mm dia bore complete. Make-: Kartar/ Kirloskar/ Upadhyay |
| 35 | Ditto all as per item No 33 above but 150 mm dia bore complete. Make-: Kartar/ Kirloskar/ Upadhyay |
| 36 | M&L for run lead joints to CI spigot and socket pipes of 80 mm bore and fittings including cleaning the joints, re-aligning the pipeline properly as required, cocking and jointing with old pig lead, including any addition / alteration for fixing required, testing pipelines for any leakage, making good any disturbed / damaged pipeline / parts etc, complete all as specified and as directed Note-: Necessary excavation and earthwork will be measured and paid separately |
| 37 | Ditto all as per item No 36 above but 100 mm dia bore complete |
| 38 | Ditto all as per item No 36 above but 150 mm dia bore complete |
| 39 | Fabricate supply and fix valve chamber covers made out of suitable size MS angle/MS plate/flat/rod,hinges, locking arrangement including painting with two coats of synthetic enamel paint over one coat of red oxide primer including removing existing unserviceable rusted cover all as directed. |
| 40 | Supply and fix in replacement ladder height 10 feet max, steps on every 01 feet made of angle iron of size 50x65x5 mm thick for sump including taking down old rusted iron ladder complete all as specified and directed. |
| 41 | Dismantling existing PVC water storage tanks and Supplying, hoisting and fixing rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) of 500 Litres capacity with and including covers, hoisted and fixed in position all as specified in SSR Part-I including connecting the overflow drain out, inlet and outlet pipes etc complete all as specified and as directed Make-: Sintex/ Reno/ Plasto |
| 42 | Ditto all as per item No.41 above but 1000 litres capacity |
| 43 | Ditto all as per item No.41 above but 2000 litres capacity |
| 44 | Ditto all as per item No.41 above but 3000 litres capacity |
| 45 | Supply and fix in repair 50 mm bore PVC Ball valve ISI marked high presssure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. Make -: Prayag/Shakti |
| 46 | Ditto all as per item No.45 above but 40mm dia bore complete. Make -: Prayag/Shakti |
| 47 | Ditto all as per item No.45 above but 25mm dia bore complete. Make -: Prayag/Shakti |
| 48 | Ditto all as per item No.45 above but 20mm dia bore complete. Make -: Prayag/Shakti |
| 49 | M& L for draining out water complete cleaning & removing accumulated sludge/ dirt, scales from bottom of walls/ ceiling /top of slab and from mouths of circulating pipes of service tanks/ PVC tanks of capacity not exceeding 500 litres, located on roof of bldgs and disinfecting the tank using bleaching powder to make the tank bacteria free and depositing the rubbish in low lying areas of defence land, writing by stencil date of cleaning of tank with white synthetic enamel paint on black ground \\" cleaned on (date) due on (date) complete all as directed. |
| 50 | All as per item No 49 above but capacity of tank exceeding 500 litres but not exceeding 1000 ltrs complete. |
| 51 | All as per item No 49 above but capacity of tank exceeding 1000 ltr but not exceeding 2000 litres complete. |
| 52 | M&L for petty repair work by replacement of fittings such as elbow,socket,tee etc including any addition/ alteration in existing line and depositing the complaint slip in complaint cell after user signature complete as per directed by engineer in charge. |
| 53 | Taking out old/ unsv cast iron/ MS tank cover from RCC tank including dismatlling of RCC base support/ MS or cast iron frame and supplying & fixing cast iron tank cover in round shape of size 21 inches internal dia, with proper anchor in PCC with nut, bolts, anchor fastner etc with locking arrangement etc complete with two coats of black bituminous paint (drinking grade) for 1000 ltr/ 2000 ltr/ 3000 ltr all as specified and as directed Note-: Plastering and PCC work shall measured and paid seperately |
| 54 | Dismantling of existing PVC water storage tank covers and Supplying and fixing PVC tank cover round shape of suitable size as per ground requirement with locking arrangement and fixed in position etc complete all as specified and as directed |
| 55 | M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces cement plaster 1:6, all as specified and directed. |
| 56 | Supply and install of installation display board of size 4'' x 3\\" made out of ECO printing lamination and mounting on ACP sheet board with back side MS channel frame and MS 2 pole 50mm square pipe with black paint, including PCC foundation complete all as specified and directed.Note-: Detail to be writing on board shall be as per site/ installation requirement. |
| 57 | Supplying, fixing, jointing and testing non-return valve suitable for GI tubing of size 80 mm bore size, (ISI Marked) both ends flanged and drilled for jointing including two flange joints and jointing material such as nuts, bolts washers rubber packing etc including taking down complete all as specified and as directed. Make :- Kirloskar, Upadhaya , Leader, Zoloto. |
| 58 | Ditto all as per item No. 57 above but 50 mm dia bore complete all as specified & directed. |
| 59 | Supplying, fixing, jointing and testing non-return valve (Forged brass swing type check valve) suitable for GI tubing of size 40 mm bore complete all as specified & directed. Make :- Leader, Zoloto |
| 60 | Supplying, fixing, jointing and testing non-return valve (Forged brass swing type check valve) suitable for GI tubing of size 25 mm bore complete all as specified & directed. Make :- Leader, Zoloto |
| 61 | S & F foot valve of size 65 mm dia cast iron body, ball type, with flanged and drilled ends and synthetic rubber coated MS ball, conformimg to relevant IS, ISI marked, including all joints, gaskets, bolts and nuts, washers, including taking up/down old unserviceable valves from any position and any addition/alteration for fixing required complete all as specified and directed by the engineer in charge. Make : Kirloskar or equivalant or as approved by GE. |
| 62 | M & L for dismantiling the existing valve chamber of size 900 X 900 X 900 mm including necessary earth work in any type of soil, PCC foundation D-2 1:3:6 in base concrete, brick work in CM 1:6 with 10 mm thick plaster internally and 15 mm thick externally in CM 1:4, 6 mm thick MS cover with hinges and locking arrangement fixed to angle iron frame made-out of 40 X 40 X 6 mm MS angles complete with 2 coats of synthetic enamel paint over one coat of red oxide zinc chrome primer on all metal works including necessary excavation earth work all plastered surfaces of valve chambers complete all as specified and directed by Engr-in-Charge. |
| 63 | Supply only Calcium hypo chlorite 65% -70% chlorine content granular based water disinfectent in sealed containers complete all as specified and as directed.Make:- 1.Aqufit manufactured by Sree Rayalaseema Hi strength Hypo Ltd. 2. Puri chlor manufactured by Sree Rayalaseema Hi strength Hypo Ltd. / M/s Ravi Enterprises / M/s Potter & Watts (Traditional products). Brands having pan india availability, acceptability & being manufactured /processed in open market termed as traditional products .The brands /makes must have certified by All India Institute of Hygenic & Public Health. 3. Best available in the market |
| 64 | Supply only Bleaching powder grade -I ISI marked having stable available chlorine % by mass minimum 35% as per IS 1065,1971 and packed in 25 Kg bag complete all as specified and directed. Make : Vikram or equivalent as approved by GE. |
| 65 | Lifting the submersible pump of 05 Horse Power from bore well,including flange/socket joints of delivery pipe, dismantling the flanged joints, lowering the submersible pump after repairing, by tightening the flanged/socket joints of column pipe, re-fixing of existing safety bucket with steel rope including taking down to workshop & rewinding and complete to make it operational /functional all as per specified and as directed. |
| 66 | S&F in repairs chlorine testing KIT with colored sample complete with all testing fitment and OT solution in rexine finish box.Make :- Techno Aqua Tech Pvt. Ltd./ Ion Exchange India/ Thermax/ Wipro |
| 67 | S&F in repairs chloroscope (Chlorine & PH test kit) for estimation of residual chlorine in water comprises of Plastic box, two tube, Droper and colour filter for colour estimation.Make :- Techno Aqua Tech Pvt. Ltd./ Ion Exchange India/ Thermax/ Wipro |
| 68 | S&F in repairs Water Quality TDS tester with ATC, Digital and Pocket type, Range : TDS 0-999 PPM(Mg/L) Model No :- ATDS0016. Make :- Techno Aqua Tech Pvt. Ltd./ Ion Exchange India/ Thermax/ Wipro |
| 69 | Supply and replace in repairs of New water meters confirming to ISO 4064:2005, including MS flange, nut bolts, rubber packing and flange thickness conforming to IS:7322-1985 and flange dimension conforming IS: 1538-1993 of size 100 mm dia suitable for installation on MS/DI/CI pipe line, including taking out old u/s water meter complete all as directed by Engineer in Charge. Make: Chambal/Kranti/Capston/Dashmesh/Accuflow or equivalent. Note: (a) Cleaning and grinding by 3 core welding of the pipe outside welding of the joint including cost of gas oxygen acetylene, welding machines, skilled and semi skilled workers internal lighting arrangements and all other incidental and operational charges etc. (b) The scope of work is inclusive of following and rate quoted is deemed to be inclusive in the amount quoted |
| 70 | M&L for complete rewinding and overhauling of 40 HP, 3-phase, 50 Hz, 415V electric motor, including disconnecting and dismantling existing burnt winding, rewinding with super-enameled copper wire of appropriate gauge using standard insulation materials (PVC sheets, cotton tape, sleeves, varnish, etc.), transportation of motor to and from workshop including loading/unloading, replacement of 2 Nos. ball bearings (make: SKF/NBC/TATA), renewal of terminal plate with brass studs, nuts, bolts, and washers, reinstallation at site with proper alignment, connection, and load testing, along with dismantling, cleaning, and overhauling of the coupled centrifugal/monoblock pump including replacement of defective components such as impellers, bushes, thrust bearings, clutch system, bowl assembly, pump shaft, and other unserviceable parts as required, followed by reassembly, alignment, commissioning, and on-load testing to ensure full operational efficiency, complete all as specified and directed. |
| 71 | All as per Item No 85 For Motor 25 HP Cap |
| 72 | All as per Item No 85 For Motor 15 HP Cap |
| 73 | All as per Item No 85 For Motor 10 HP Cap Please Enable Macros to View BoQ information |
| 74 | All as per Item No 85 For Motor 10 HP Cap Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender