Tender For Repair To Ceiling , Flooring , Tiling, Cup Boards , Doors, Windows Of Sports Complex,Shopping Complex, Mes Office And Certain E Type Qtrs At Zone B Area Of Drdo Township Kanchanbagh.
Tender Value
37 Lakhs
Estimated cost
Bid Submission
17 Oct 2026
23 days left
EMD
74000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Ceiling , Flooring , Tiling, Cup Boards , Doors, Windows Of Sports Complex,Shopping Complex, Mes Office And Certain E Type Qtrs At Zone B Area Of Drdo Township Kanchanbagh.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down door chowkhat of area exc 1.5 sqm but not exc 4 sqm each with shutter (without taking off shutter from the frames) complete all as directed. |
| 2 | Taking down door chowkhat of area n exc 1.5 sqm each with shutter (without taking off shutter from the frames) complete all as directed. |
| 3 | Taking down shutter of any description of area exc 1 sqm but n.exc 2 sqm complete all as directed. |
| 4 | S&F 1.25mm thick pressed steel door frame of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including PCC filling 1:3:6 type C0 (using 12.5mm graded stone aggregate) filling in the frames complete all as directed. |
| 5 | S&F factory made solid PVC door frame of size 50x47 mm made out of 5 mm thick plain colour PVC sheet reinforced with M.S. Square tube 19mm x 19 mm of gauge complete all as specified and as directed.Make : Rajshree |
| 6 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site complete all as directed.Make : Rajshree or equivalent |
| 7 | S&F 2nd class hard wood 35 mm thick factory made panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered partical board with commercial veneering on both faces The size of rail and stile as per IS :1003 part 1) , kiln seasoned and chemically pressure treated complete all as directed. |
| 8 | S&F 2nd class hard wood Glazed skelton shutter 30 mm thick open rebated and prepared to receive glass, gauze etc. (without sash bars) edges of framing plain,chamfered or rounded fitter with cut and mitred beads foe securing glass all as per section 8,clause 8.24(a) complete all as directed. |
| 9 | S&F 30mm thick flush shutters, solid core construction with block board and plywood face panels, commercial type on both sides complete all as directed. |
| 10 | Supply & fixing of UPVC ventilators with top hung glazed and wire mesh shutters made out of profile width of frame 50 mm to 60 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, with peg stay of suitable size to keep hung shutter in open position, with temper proof screws with and including glazed shutter fixed with 3 mm thick frosted glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and filling gap of wall and frame with silicon sealent complete incl taking down old down old ventilator complete all as specified all as directed. |
| 11 | Supply & fixing of UPVC windows three track sliding window with two glazed and one wire mesh sliding shutters of profile width of frame 50 mm to 60 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and filling gap of wall and frame with silicon sealent complete incl taking down old down old window complete all as specified. all as directed . |
| 12 | S&F Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 7.5mm). Tprofile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) (A) Area not exceeding 1.00 sqm each all as directed including taking down old window area n.exc 1.50 Sqm each . |
| 13 | S&F framed work such as angle iron, grills, gratings, Gates etc., with ends of bars shouldered and/ or riveted, or forged into spike, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings and similar work conforming to Fe 290 Gde E-165 including dismantling existing old MS work complete all as directed. |
| 14 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10 Cm in width or grith and applying two coats of synthetic enamel paint over one coat of Zinc chrome primer complete all as directed. |
| 15 | M&L for preparation of new wooden surfaces over 10 cm width/girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 16 | S & F 3mm thick sheet glass ordinary quality fixed with oil putty and necessary clips/nuts, bolts area not exceeding 0.5Sqm in each pane complete all as directed. |
| 17 | S & F 3mm thick Figured glass, pin head type fixed with oil putty and necessary clips, area not exceeding 0.5Sqm in each pane complete all as directed. |
| 18 | S&F galvanised mild steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks for wooden doors with nuts and bolts suitable for MS beading for steel windows complete all as directed. |
| 19 | M&L for prelaminated particle board 18/19mm thick, interior grade, prelaminated on one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete including dismantling of existing damaged boarding complete all as directed. |
| 20 | S&F continuous (piano) hinges of flap width 30mm, mild steel, bright finish or electo galvanised complete all as directed. |
| 21 | M&L for 2nd class hard wood plain fillets of cross sectional area exceeding 6 Sqcm but not exceeding 13 sqcm, bull nosed, splayed, chamfered or rounded on one edge or face complete all as directed. |
| 22 | S&F in repairs 125mm size aluminium handles, cast type, anodised complete all as directed. |
| 23 | S&F in repairs 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as directed. |
| 24 | S&F in repairs 100mm long MS steel butt hinges complete all as directed. |
| 25 | S&F in repairs 125mm long MS steel butt hinges complete all as directed. |
| 26 | S& Fix in repairs floor door stopper of aluminium alloy body and tounge anodised with hard steel spring 150 mm fixed to door complete all as directed . |
| 27 | Supply and fix in repairs MS single action spring hinges with steel wire springs, stove enameled black 125mm long complete with necessary screws/welding complete all as directed. |
| 28 | Resecuring the shutters without taking down of any description of area exc 1sqm and n exc 2sqm each after carrying out necessary repair complete all as directed. |
| 29 | Taking down shutters of any description of area exc 1sqm and n exc 2sqm each and carry out necessary repair and refixing in same opening complete all as directed. |
| 30 | Hacking out old broken glass (any thickness, size quality or description) from wood /steel frame, glazed with oil putty or fixed with beads and height upto 5 floors and S&F plain sheet glass of 3 mm thick ordinary quality and glazing with oil putty and clips in squares not exceeding 0.50 Sqm in each pane complete all as directed. |
| 31 | S&F in repairs 600 mm x 450 mm beveled edge mirror of selected quality glass 5.5mm thick & fixed with chromium plated brass screws and washer and aluminum beading complete all as directed. |
| 32 | S&F in repairs galvanised mild steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with 2nd class hard wood beading suitable for existing wooden doors including making holes/ cutting rusted bolts and nuts on steel windows and provision of new nuts and bolts suitable for MS beading complete all as directed. |
| 33 | S&F in repairs 19 mm dia medium grade MS curtain rods, powder coated with brackets, stops, rollers complete all as directed. |
| 34 | S&F in repairs 300mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as directed. |
| 35 | S&F in repairs 40mm dia, aluminium, anodized cupboard knobs fixed with nut, screw and washer complete all as directed. |
| 36 | M&L non skid ceramic coloured rectified tiles 7 to 8 mm thick (square/rectangular) first quality area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 including dismantling existing tiles with screed bed complete all as directed. |
| 37 | M&L for glazed ceramic tiles of size 300x450x7mm thick vertical surfaces such as skirting/dado jointed in neat cement slurry and pointed with white or coloured cement to match the colour of the tiles laid on and including 10mm thick backing coat in CM 1:3 including dismantling existing tiles along with backing coat complete all as directed. |
| 38 | Providing and laying glazed glass mosaic tile of size (25mmx25mm) size and thickness 4 to 5mm on floor/vertical surfaces on swimming pool of approved manufacturer and specified shade like Orient Blue / Dark Blue / new blue or any pattern etc. laid in approved pattern on 3-6 mm ( 5mm average) thick bed of adhesive mortar of Polymer modified cementitious adhesive in conjuction with polymer modified liquid equivalent product of etc mixed in required porportion as specified by manufacturer including filling / sealing of joints 2-3 mm thick between the tiles with epoxy grout with matching colour pigment to make it water tight and finished neat complete, as directed by Engineer-in-charge. |
| 39 | M&L for Granite (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone and cutting, polishing, laid on and including 15mm thick screed bed in cement mortar 1:6 including taking down existing stone slab/ tile complete all as directed. |
| 40 | S&F in repairs of swimming pool Flexible/rollable or rigid greatings Thickness 35mm , bar spacing 8mm, bar width 10mm and maximum 500mm width. Premium, high-impact strength plastic feat. UV absorbency; non-corrosive, resistant to chlorine water and spa water; rounded safety profile seal. suitable fot barefoot walkable complete all as specified and directed. |
| 41 | S/F in repairs Stainless Steel work as Gde 304 SS in railing/swimming pool ladder/grab bar/supports including all fitting and fixing all as specified and directed by Engr in Charge. |
| 42 | S/F 12 mm thick toughned glass making provision of hole for all ss glass fittings and fixing including SS patch fittings/ acceceries and hinges for single and double leaf in door all as specified etc completed and directed by Engr in Charge( rate shall be inclusive taxes ,handling and transportation) etc complete as directed. |
| 43 | Double action floor spring hydraulically regulated made ISI marked make: Dorma/shivalik/royal of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed by Engineer in Charge |
| 44 | Supply and fixing 18\\" long SS Handle Make : Shivalik/dorma heavy duty for door all as specified and directed by Engineer in Charge |
| 45 | M/L for SS lock for toughned glass but for single and double leaf shutter with tripple key etc completed of make Godrej/link/Royal etc completed and as directed. |
| 46 | M&L for 2 mm thick polycarbonate sheet of any geomatric shape and pattern as approved fixed both side top & bottom with aluminium strip to match with the profile of existing roof sheet and EPDM rubber gasket fixed with self tapping screws in roof/wall up to any height ,both side UV Proctected . complete all as specified and as directed by Engr. in charge. Make : Duratuff/lexon etc |
| 47 | Dismantling Asbestos cement (corrugated ted, semi corrugated, etc.) sheets in roof coverings and taking care of earthing strip and refixing all as specified and directed by Engr in Charge |
| 48 | M & L for double charged vitrified tiles of superior quality7-8 mm thick dark shade square or rectangular polished , area of each tile exc 0.42 sqm but nexc 1.0 sqm each tile , in floors etc set and jonted in neat cement slurry and pointed in white or coloured cement to match with and Including 15mm thick cement screed bed in cement mortar 1:6 etc complete all as specified and as directed by Engineer-in-charge of make Tropicana super white of Orient or equivelant /Kajariya/somany/marbonite .pattern and design as approved by GE or as per manufacturers catelouge and instruction. |
| 49 | Ditto all as per item above but in Vertical surfaces such as dado/skirting including 10 mm thick rendering of cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge. |
| 50 | S/F in repairs aluminium composite panels for outdoor use (ACP) fixed to walls /claddindgs, facades in any geomatrical pattern /shape ,columns projections, chajjs, elevations or in any other positions 3 mm thick aluminium composite panel of approved colour and brand and of sand series of Arrowbond/viva/Alstone/Crossbond/Eurobond or equivalent as approved including all materials such as MS hollow rectangular section 19 gauge and size 2.5 inches and fixing at 2 to 3 feet centre to centre for base framing including scaffolding for working at any height. The ACP shall be fixed above the MS frame/battens to the masonry/RCC walls/Facias with necessary clamps , brackets and anchor fastners. The total cost includes cost of MS frame, ACP panels, clamps , wheather sealents using silicon, gasket , forms, fixtures, scaffolding, all type of tools and plants and any other consumables like fastenings, strips, nuts ,bolts, rivets , washers, sealent etc completed with all saftey measures up to 4.5 m height etc completed and as directed by Engr in charge |
| 51 | Supply and fixing in repair one piece EWC with built in twin Flushing fittings including close PP white seat cover of same make closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and flush pipe.Complete all as specified and directed by Engineer-in-charge. model No.Kubex series cat No.KUS WHT-35851 SN (Yr 2018) of Jaquar or equivalent in hindware /somany/CERA |
| 52 | Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c) consisting of Main Runner 3600/3000 mm long, Cross Tee 1200mm/600mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. The Main Runners to be placed @ 1200mm, The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm. Grid of module size 600mm x 600mm shall be supported by 3/4 mm dia G.I. wire from purlins/soffit. 4mm thick High Pressure Steam Cured Everest Non Asbestos Fibre Cement Ceiling tile Oceanic/Diamond textured (Density>1200 Kg/m3, Modulus of Rupture(M.O.R)-10 MPa, Thermal Conductivity(K)-0.02 W/mK) of size 595mm x 595mm, confirming IS 14862 & Type B Category III of ISO 8336:1993, (Reaction to fire-A2-s1-d0) tested as per EN13501 Part-I & BS-476 Part 4,5,6&7, should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of engineer-in-charge. |
| 53 | Providing and fixing in repsir approved make factory-finished Decorative Wall Panelling of minimum 4 mm thickness made of HDPS/polymer composite with activated charcoal additives, waterproof, termite resistant, prefinished decorative texture, fixed over prepared wall surface or approved framework using PU/MS polymer adhesive and stainless-steel fasteners wherever required, including cutting, matching trims, corner profiles, joint finishing, making openings for electrical fixtures, complete as per manufacturer's specifications and as directed by the Engineer-in-Charge. |
| 54 | Providing and fixing in repair 5 mm thick factory-finished Make Rajshree or any similar PVC Rigid Foam Sheet Wall Panelling of approved shade and texture over framework consisting of 25 mm wide × 5 mm thick PVC rigid foam strips fixed vertically at 405–407 mm centre-to-centre with 65 mm long screws and PVC fasteners, the strips having a central groove of 6 mm width and 2 mm depth to conceal screw heads, panels fixed using approved PVC solvent cement adhesive, including cutting, matching PVC corner mouldings, edge trims, joint finishing, making openings for electrical fixtures, scaffolding, all accessories, labour, wastage and cleaning, complete as per manufacturer's specifications and as directed by the Engineer-in-Charge |
| 55 | Providing and fixing in repairs Horizontal roller Blinds comprising 25 mm wide, 0.18–0.21 mm thick polyester powder-coated aluminium alloy slats with colour as approved by the Engineer-in-Charge, complete with powder-coated steel head rail, matching bottom rail, high-strength polyester ladder cords, braided lift cords, manual tilt mechanism, self-locking lift arrangement, galvanized/powder-coated mounting brackets, stainless steel screws, nylon wall plugs and all accessories, fixed to walls or ceilings as directed, including transportation, handling, cutting, fitting, testing, cleaning and making good disturbed surfaces, complete in all respects as per manufacturer's specifications and the directions of the Engineer-in-Charge. |
| 56 | Demolition of plain cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness below or above ground level, removal of rubbish and debris all as specified and as directed. |
| 57 | M&L providing 75mm thick plain cement concrete type D-2, 1:4:8 ( using 40mm graded stone aggregate) as in sub base of floors etc complete all as directed. |
| 58 | M&L for PU coated machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment (approved by GE) confirming to IS 15658-2006 of 60mm thickness, M-35 grade including laid over 50mm thick sand cushion bed and preparing the surface to uniform level to recieve tiles including taking down existing concrete paving tiles complete all as specified and as directed. |
| 59 | M&L Providing precast cement concrete type B-1, 1:2:4, (using 20mm grade stone aggregate) in kerb stones with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:4 including dismantling existing cement concrete kerb stones of any description complete all as specified and directed |
| 60 | Servicing of rolling shutter greasing/oiling serviceing for smoothy functioning for all parts including ball bearing, Spring, gear assembly, welding while required etc, rolling shutter push pull or manual type, size n exc 10 sqm complete all as specified and directed. |
| 61 | Servicing of rolling shutter greasing/oiling serviceing for smoothy functioning for all parts including ball bearing, Spring, gear assembly,welding while required etc, size exceeding 10 sqm but not exc 20 Sqm complete all as specified. |
| 62 | Easing, adjusting, greasing of base wheel & top grid wheel and repairs to steel door , each shutter leaf n exc12 Sqm, including minor repairs, welding, change of damaged base wheel, guide wheel, nut bolt, bearing balls etc to sliding door leaf for noiceless smooth operation complete all as directed. |
| 63 | Easing, adjusting, greasing of base wheel & top grid wheel and repairs to collapseable shutter, each shutter leaf n exc 6 Sqm, including minor repairs, weilding, change of damaged guide channel, handle, members etc to sliding door leaf of hanger for noiceless smooth operation complete all as directed. |
| 64 | S&F in repair MS Spring suitable for rolling shutter upto 10 Sqm |
| 65 | S&F in repair MS Spring suitable for rolling shutter size exceeding 10 sqm but not exc 20 Sqm |
| 66 | S&F in repair MS ball beraing for rolling shutter. |
| 67 | S&F in repair lathe of thickness 1.25mm thick for rolling shtters |
| 68 | S&F in repair shaft for rolling shtters |
| 69 | S&F in repair gear assembly suitable for rolling shutters of any size fixed in position all as specified. |
| 70 | S&F in repair mild steel section of any size and section including necessary cutting & drilling holes for rolling shutter and collapseable shutter as required. |
| 71 | S&F in repair mild steel solid rollers of any dia or section complete all as specified |
| 72 | M&L MS work as in pintel hooks, brackets etc incl necessary sutting welding, drilling holes confirming to Fe-290 complete all as specified. |
| 73 | S&F Repair 1.25mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, but gear operated type with bevel gear box and crank handle complete all as specified and directed. |
| 74 | Supply only Safety lever locks mild steel with 4 levers for rolling shutters |
| 75 | M&L for Preparation of new or previously untreated surfaces of steel or iron surfaces exceeding 10cm width or girth and applying two coats of aluminium paint over one coat of red oxide primer.Complete all as specified and as directed by Engineer-In-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysOct 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender