Tender For special Repair To Bldg No N-14 Wksp Area And P-1 Old Inf Bde Area And Provn Of Lightening Conductor In Bldg No P-01 (Quarter Guard) At Old Amritsar Cantt (Job Nos - Ac/Srw/(Bldg)-15/2026-27 & Asr/Minor/01/2026-27)
Tender Value
44.99 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
16 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No N-14 Wksp Area And P-1 Old Inf Bde Area And Provn Of Lightening Conductor In Bldg No P-01 (Quarter Guard) At Old Amritsar Cantt (Job Nos - Ac/Srw/(Bldg)-15/2026-27 & Asr/Minor/01/2026-27)
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by engineer-in-Charge. |
| 2 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by engineer-in-Charge. |
| 3 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of anycolour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by engineer-in-Charge. |
| 4 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed by engineer-in-Charge. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for truss etc. complete all as specified and as directed by engineer-in-Charge. |
| 6 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed by engineer-in-Charge. |
| 7 | Excavating in post holes (or similar holes) each hole not exceeding 0.5 Cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and remvoing surplus soil to a distance not exceeding 50m and making good surfaces in soft/loose soil complete all as specified & directed by the engineer-in-Charge. |
| 8 | Cement concrete type B2, 1:2:4 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed by the engineer-in-charge. |
| 9 | M&L apply two coats of synthetic enamel paint over a coat of primer including preparation of new steel surfaces complete all as specified and directed by the engineer-in-charge. |
| 10 | Dismantling boarding, any description , fixed in any position with screws complete all as specified and directed by the engineer-in-charge. |
| 11 | S&F in repair Anodised aluminium snap grid frame (600X600mm )work for false ceiling complete all as specified and directed by the engineer-in-charge. |
| 12 | Providing and fixing 12 mm thick Gypsum board to flat surface over aluminium snap grid 600mmx600mm frame work, or metal frame work and reinforced with G.I. wiremesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and directed by the engineer-in-charge. |
| 13 | Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm , glass and required accessories. (Note: The unit rate quoted by contractor includes all other connected accessories. Net Opening will be measured For payment purpose.) complete all as specified and directed by the engineer-in-charge. |
| 14 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58 60 (Suspension Grade), calcium carbonate and natural fibers(wood powder/ rice husk wheat husk)and non tonic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solventcement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of2200 N(Face)& 1100 N (Edge), minimum comp (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed by engineer-in-Charge. |
| 15 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58 60 (Suspension Grade), calcium carbonate and natural fibers(wood powder/ rice husk wheat husk)and non tonic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solventcement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of2200 N(Face)& 1100 N (Edge), minimum comp (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of engineer-in-Charge |
| 16 | S&F Factory made single extruded WPC (Wood Polymer solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk'wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)& 900 N(Edge), minimum complete all as specified and directed by the engineer-in-charge.compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S Screw complete all as specified and as directed by engineer-in-Charge. |
| 17 | S&F in repair Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 150mm complete all as specified and directed by the engineer-in-charge. |
| 18 | S&F in repair Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed complete all as specified and directed by the engineer-in-charge. |
| 19 | S&F in repair 150mm long Aluminium handles, cast type anodised complete all as specified and directed by the engineer-in-charge. |
| 20 | S&F in repair stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed. |
| 21 | S & F in repair 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed by the engineer-in-charge. |
| 22 | S&F in repair powder coated aluminium frame for doors ,windows, ventilators, partition with one or more rebates including joining cleats, rubber neoprene packing for fixing complete all as specified and directed by engineer-In-Charge.( Min. thickness of powder coating 50 micron) complete all as specified and directed by the engineer-in-charge. |
| 23 | S&F in repair powder coated aluminium glazed shutter(for sliding doors) Al-section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading. ( Min. thickness of powder coating 50 micron) complete all as specified and directed by the engineer-in-charge. |
| 24 | S&F in repair Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing ,particle board and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer scomplete all as specified and directed. |
| 25 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by the engineer-in-charge. |
| 26 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win- dow-cills, cooking plat- forms and like in cement mortar (1:4) including point-ing in white cement (1:2) using marble dust with admix- ture of pigment to match with shade of granite complete all as specified and directed by the engineer-in-charge. |
| 27 | M&L for non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and as directed by engineer-in-Charge. |
| 28 | M&L for glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and as directed by engineer-in-Charge. |
| 29 | M&L for Vitrified ceramic light shade tiles 8/10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar(1:6) 15mm thick for laying floor finishes complete all as specified and as directed by engineer-in-Charge. |
| 30 | S&F in repair 25mm dia stainless steel curtain rods with brackets, stops , rollers finials 1 pair of decorative knobs for each curtain rod etc complete all as specified and as directed by engineer-in-Charge. |
| 31 | Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and as directed by engineer-in-Charge. |
| 32 | Material and labour for brick work with sub-class 'B' bricks straight or curved on plan exceeding 6 metres mean radius built in cement mortar 1:4 complete all as specified and as directed by engineer-in-Charge. |
| 33 | All as per Srl item No 32 above but except bricks (old dismantled serviceable bricks obtained from Srl item No 15 shall be reused after necessary cleaning of mortar) complete all as specified and directed by the engineer-in-charge. |
| 34 | S&F in repairs vitreous china wash hand basin padestal white with flat back type size 550x400mm excluding taps chain and plug and porcelain stopper but including brackets CP waste coupling 32mm and PVC waste pipe 32mm dia including cutting for and pinning ends of brackerts complete all as specified and as directed by engineer-in-Charge. |
| 35 | S&F in repairs pillar taps 15mm dia cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed by engineer-in-Charge. |
| 36 | Supply & Fixing vitreous china urinal half stall type with CP spreader white incl CP waste coupling with grating and union fordischarge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe complete all as specified and as directed by engineer-in-Charge. |
| 37 | S&F in repair of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and as directed by engineer-in-Charge. |
| 38 | S/F in repair15mm bore type angle cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete all as specified and directed by the engineer-in-charge. |
| 39 | S&F Vitreous China wash down water closet pan (pedestal pattern), for kindergarden white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed by the engineer-in-charge. |
| 40 | Supply only 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia complete all as specified and as directed by engineer-in-Charge. |
| 41 | S&F in repair PVC Jet spray suitable for EWC complete all as specified and directed by the engineer-in-charge. |
| 42 | S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm. complete all as specified and directed by the engineer-in-charge. |
| 43 | S&F in repairs CP brass towel rail of 20mm dia and 600m long complete all as specified and as directed by engineer-in-Charge. |
| 44 | S&F in repair 8mm thick bevelled edge mirror of selected quality glass,mounted on CP stud including drilling cutting and fixed to wall complete all as specified and as directed by engineer-in-Charge. |
| 45 | M&L in repair 18/19mm thick prelaminated HDMR board, interior grade, with decorative choice laminated both sides fixed with screws as in shelves/shutters complete all as specified and as directed by engineer-in-Charge. |
| 46 | S&F in repair continuous (piano) hinges, width of flaps (when open) in 40mm mild steel bright finish or electrogalvanised complete all as specified and as directed by engineer-in-Charge. |
| 47 | S&F in repair 100mm long Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by the engineer-in-charge. |
| 48 | S&F in repair 75 to 80mm long brass handle complete all as specified and directed by the engineer-in-charge. |
| 49 | Supply & Fixing rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore complete all as specified and directed by the engineer-in-charge. |
| 50 | S&F in repair of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and as directed by engineer-in-Charge. |
| 51 | Material and labor vitrified Endura tile of size exc. 09 but not exc. 0.36 sqm, out door parking tiles heavy duty set and joint and pointed in neat cement slurry in floors with pigment over 20mm thick cement screed in CM 1:6 and pointed with white cement mixed with pigment to match the colour of tiles complete all as specified and as directed by engineer-in-Charge. |
| 52 | Material and labour for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed by the engineer-in-charge. |
| 53 | M&L for 50mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate as in plinth protection Finishing fair and even complete all as specified and directed by the engineer-in-charge. |
| 54 | Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed by engineer-in-Charge. |
| 55 | M&L for rendering 15 mm thick on brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and as directed by engineer-in-Charge. |
| 56 | Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement complete all as specified and directed by the engineer-in-charge. |
| 57 | M&L for preparation of newly plastered surfaces and applying two coats of exterior emulsion paint paint over a coat of cement primer including 1 mm thick birla white putty on external wall surfaces complete all as specified and as directed by engineer-in-Charge. |
| 58 | M&L Preparing of old decorated brick/concrete plastered/un-plastered surfaces of walls pillars cornices applying two coat of oil bound distemper over a coat of primer incl 1 mm thickplaster of paris putty in depression and making smooth surface complete all as specified and as directed by engineer-in-Charge. |
| 59 | Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed by the engineer-in-charge. |
| 60 | All as per Srl item No 59 above but size of opening exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr complete all as specified and directed by the engineer-in-charge. |
| 61 | S&F in repair 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down complete all as specified and directed by the engineer-in-charge. |
| 62 | S&F in repair 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down complete all as specified and directed by the engineer-in-charge. |
| 63 | Demolition of Stone slabs and tiles/granite of any description or thickness in floors, aprons etc complete all as specified and directed by the engineer-in-charge. |
| 64 | Hacking out old broken glass in repair from wooden/ steel window cleaning the surface and removing from the site, thenafter S&F clear glass, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including and glazing with oil putty/wooden beading as per site requiremnets complete all as specified and directed by the engineer-in-charge. |
| 65 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed by the engineer-in-charge. Please Enable Macros to View BoQ information |
| 66 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed by the engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender