Tender For As And As Of Boundary Wall Including Main Gates Of Wwt(V) Premises Bldg No P-21 Inside Naval Dockyard ,Provision Of New Earth Pits At Nldc Bldg (P-279/280/281),Rukmini Bldg(P-64),Ts-1 Bldg(P-01A),Ts-Ii Bldg(P-02B) Of Transmitting Station D
Tender Value
43.66 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
11 days left
EMD
87320
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for As And As Of Boundary Wall Including Main Gates Of Wwt(V) Premises Bldg No P-21 Inside Naval Dockyard ,Provision Of New Earth Pits At Nldc Bldg (P-279/280/281),Rukmini Bldg(P-64),Ts-1 Bldg(P-01A),Ts-Ii Bldg(P-02B) Of Transmitting Station Dolphin Hill,Provision Of Common Toilet For Ladies Behind Single Living Accomodation At installation Virbahu,Special Repair To The Flag Mast At Transmitting Station Dolphin Hill Visakhapatnam.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc stacking the serviceable bricks after removing mortar and cleaning for re-use and disposal of debris and rubbish outside MD land as directed by the Engr-in-Charge. |
| 2 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 3 | Demolition of reinforced cement concrete in any position not otherwise specifically provided for and removing rubbish to outside MD land complete all as specified and directed. |
| 4 | Disamntling post or struts any section, RCC or steel any type including taking out embedded portion in concrete and making good disturbed ground complete all as specified and directed. |
| 5 | Demolition of un-reinforced cement concrete in ground floors and pavings n.exc 15cm thickness, (Below or above Ground level) and disposal of debris and rubbishto a distance n.exe 100 m complete all as specified and directed. |
| 6 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar and removing rubbish upto a distance outside MD land complete all as directed by the Engr-in-Charge. |
| 7 | M&L for excavating in trenches in soft/loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified |
| 8 | M&L for PCC 1:4:8 , type D-2, using 40mm graded crushed stone aggregate as in foundation,filling and mass concrete commplete all as specified and directed. |
| 9 | M&L for plain cement concrete 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 10 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed. |
| 11 | Removing excavated soils to a distance exceeding 1.5 KM but not exceeding 5 KM and depositing where directed. |
| 12 | M&L for RCC M-30 (Design mix) using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, foundation for columns, etc complete all as specified and directed. |
| 13 | M&L for RCC M-30 (Design mix) using 20mm graded crushed stone aggregate as in columns,pillars etc complete all as specified and directed. |
| 14 | M&L for RCC M-30 (Design mix) using 20mm graded crushed stone aggregate as in lintels beams and roof beams etc complete all as specified and directed. |
| 15 | M&L for RCC M-30 (Design Mix) using 20mm graded stone aggregate as in chajjas complete all as specified and directed. |
| 16 | M&L for RCC M-30 (Design mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and the like etc complete all as specified and directed. |
| 17 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat rough finished surface complete all as specified and directed. |
| 18 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for flat fair finished surface complete all as specified and directed. |
| 19 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, for flat fair finished surface complete all as specified and directed. |
| 20 | Use and waste of formwork to flat surfaces of chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed by Engineer-in-Charge. |
| 21 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and directed. |
| 22 | Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide flat fair finished surface complete all as specified and directed. complete all as specified and directed. |
| 23 | S & F high strength corrosion resistant TMT steel bars,Grade Fe 500D, 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 24 | S&F mild steel TMT bars ,Grade Fe 500D, 5mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 25 | M & L for Pre-cast cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate), block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed. |
| 26 | M & L for Brick work with fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size brick complete all as specified and directed. |
| 27 | M & L for rendering 15 mm thick in two coats (10mm+5mm each) on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). |
| 28 | M&L for 10 mm thick rendering in CM 1:6 on fair face of brick work finish the surface fair and even without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 29 | M & L for rendering 5 mm thick in Cement Mortar 1:3 on fair faces of concrete surface of ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 30 | M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even and fair complete all as specified and as directed. |
| 31 | Supply only integral water proofing compound [ISI marked] of approved make. |
| 32 | M&L for preparation of new platered surface of wall and applying two coats of weather proof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre, dart pick up resistant,silicon enhanced,UV resistant and PU enhanced property over a coat of alkali resistant primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces including all necessary scaffolding , complete all as specified and directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 33 | M & L for preparing newly plastered surfaces of walls, etc and applying three coats of white wash complete all as specified and directed. |
| 34 | M & L for preparing newly plastered surfaces of ceilings, etc and applying two coats of white wash complete all as specified and directed. |
| 35 | M & L for joint free glazed ceramic tiles, edge cut, coloured, premium quality, of size 300 mm X 450 mm, 7 to 8 mm thick as in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile over backing coat of 10mm thick in cement mortar 1:3 complete all as specified and as directed. |
| 36 | M & L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed to a true surface including watering complete all as specified and directed. |
| 37 | M & L for hardcore of gauge n.exc 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 38 | M&L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) in sub base of floorings finishing the cement concrete surfaces even and fair complete all as specified and directed. |
| 39 | M & L for 40mm thick plain cement concrete 1:2:4 type B-1 using 40mm graded aggregate as in sub-base, floors and pavings etc complete all as specified and directed. |
| 40 | M & L for granite stone slab (of any type) work (table rubbed or polished) as in floor, 16 to 18 mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in cement mortor 1:6 & cutting, polishing complete all as specified and directed. |
| 41 | M & L for granite stone slab (of any type) as in vertical surfaces such as skirting/dado etc, 16 to 18 mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 10 mm thick screed bed in cement mortor 1:4 & cutting, polishing complete all as specified and directed. |
| 42 | Material and labour for preparation of horizontal or vertical surfaces for water proofing treatment on existing cleaned non accessible RCC roof with the following specification and manufacturings instruction complete all as specified and as directed:-(a) Preparing and cleaning of fully dry surfaces as per IS3067-1966(b) Applying bitumen primer(85/25 grade)conforming to IS:3384-1968 over the cleaned plaster surface @ 0.5 Ltr per sqm by the same membrane manufacturer of density at 25°C, 0.87 to 0.89 kg / Liter and viscosity 70-160 cps shall be applied on the prepared surface.(c) Applying a layer of APP based polymeric membrance 3.0mm thick (minimum) weight 3.6Kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160gms per sqm by torch application.The over laps shall be minimum 100mm on the transverse direction and 75 mm on longitudinal direction. (d) Applying one coat of aluminium paint @0.10 ltr per sqm over APP based polymeric membrane. |
| 43 | Material & labour for 25 mm thick cement concrete (1:2:4) type B-0 using 12.5 mm gaded stone aggregate laid on RCC roof slab to make surface levelled for proper slope finish the surface even and fair complete all as specified and as directed. |
| 44 | M & L for 10 mm thick, screed bed as in roof in cement mortar 1:3 finishing the surfaces even and smooth without using extra cement mixed with water proofing compound as per manufacturer's instructions complete all as specified and directed. (Note: WPC shall be measured and paid seperately) |
| 45 | S & F Well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 46 | S & F 35 mm thick, 2nd class hardwood, factory made, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 47 | M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed. |
| 48 | S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 49 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete as per specification and drawing and as directed. |
| 50 | Cutting holes in brick walls for inserting hold fast and making good disturbed surfaces in CM 1:3 or PCC 1:2:4 type B1, exc. Half brick thick but n.exc. 1 brick thick complete all as specified and directed. |
| 51 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 52 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process ofrequired length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paidseparately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shallbe accepted but no extra payment on this accountshall be made. |
| 53 | S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 54 | S&F 5.5 mm thick sheet glass,glazing with oil putty and glazing clips in metal/ wooden frame with second class hard wood beading/ aluminum beading in frames in squares exceeding 0.5 Sqm and nexe 1.00 Sqm in each pane complete all as specified and directed. |
| 55 | S & F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 56 | S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 57 | S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed |
| 58 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, taple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete as specified and directed |
| 59 | S & F vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed. |
| 60 | S & F 15 mm bore, Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with all accessories complete all as specified and directed. Make: Jaquar Cat No. ALD-573 or equivelant model of make as per list of manufacturer mentioned in PS. |
| 61 | S&F Toilet paper holder with with flap recessed type, chromium plated fixed to wall with brass screw complete all as specified and directed Make: Jaquar Cat No. ACN-1153S or equivelant of make as per List of manufacturer's mentioned in PS. |
| 62 | S & F 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed. |
| 63 | S & F vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and directed. |
| 64 | S & F Vitreous China thin rim table top basin, oval Shape of Size: 500x380x120 mm excluding taps fixed on granite slab complete all as specified and directed. Make : Jaquar Cat No. JDS-WHT-25937 or equivelant model of make as per list of manufactureRmentioned in PS. |
| 65 | S & F 125 mm size, shower rose, chromium plated, swival type, complete all as specified and directed. |
| 66 | S&F 15 mm bore fancy type pillar cock auto closing system with 65mm extension body, screwed for iron pipe complete all as specified and as directed. Model No: Jaquar Cat Part No PRS-031L65 or equivalent model of make as per list of manufacturer mentioned in PS. |
| 67 | S & F 5mm thick, bevelled edge looking mirror of size 1500 mm X 600mm of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and 1st class hard wood designer frame around the mirror with pretruded stainless steel metal studs and fixed to wooden plug with chromiun plated brass screws and cup washers complete all as specified and directed. |
| 68 | S & F 15mm bore, bib taps, 2 way, fancy type cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make: Jaquar Cat No. SOL-6041or equivelant of make as per list of manufacturer) |
| 69 | S & F 15mm bore, bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make: Jaquar Cat No. CON-037KNor equivelant of make as per List of manufacturer's) |
| 70 | S & F 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. (Make: Jaquar of make as per list of manufacturer) |
| 71 | S & F chromium plated brass Bottle trap 175 mm for wash hand basin with inlet and outlet, screwed for pipe or connections including necessary apcking union and cap fixed complete all as specified and directed.Make: CAT No. BEA-23 of PRAYAG or its equivelant of make as per list of manufacturer's as approved by GE. |
| 72 | S&F single towel rail 600mm long,stainless steel complete all as specified and directed. Make: Jaquar Cat No. ACN-1111SM or equivelant of make as per List of manufacturer's |
| 73 | S & F 15 mm bore, angular stop cock with wall flange, cast copper alloy, chromium plated, fancy type with handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make: Jaquar Cat No. CON-059KN or equivelant of make as per list of manufacturer) |
| 74 | S&F 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and directed. |
| 75 | Supply, laying, connection and testing in repair, 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 76 | Supply, laying, connection and testing in repair, 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 77 | Supply, laying, connection and testing in repair, 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 78 | Supply, laying, connection and testing in repair, 40 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 79 | S & F 75mm bore PVC [SWR] pipes single socketed, pressure rating 6kg/sqcm, type-A grade, in any length with solvent cement/ rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 80 | S & F 110mm bore PVC [SWR] pipes single socketed,pressure rating 6kg/sqcm, type-A grade , in any length with solvent cement/ rubber ring joints, fixed to walls with necessary brackets, clamps complete all as specified and as directed. |
| 81 | S & F 75mm bore PVC [SWR] pipes single socketed, pressure rating 6kg/sqcm, type-A grade, in any length with solvent cement/ rubber ring joints, fixed to walls with necessary brackets, clamps complete all as specified and as directed. |
| 82 | S & F 110mm bore PVC [SWR] pipes single socketed, pressure rating 6kg/sqcm, type-A grade, in any length with solvent cement/ rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 83 | S & F 75/100 mm bore, PVC (SWR) floor trap/Nahani Trap, with grating including jointing to waste pipe with solvent cement complete all as specified and directed. |
| 84 | S & F 75 mm bore, PVC (SWR) bends of any radius including jointing with solvent cement complete all as specified and directed. |
| 85 | S & F 110 mm bore, PVC (SWR) bends of any radius including jointing with solvent cement complete all as specified and directed. |
| 86 | S & F 110 mm bore, PVC (SWR) bends of any radius with access door including jointing with solvent cement complete all as specified and directed. |
| 87 | S & F 110mm bore, PVC (SWR) junction single, (Single T) equal or unequal including jointing with solvent cement complete all as specified and directed. |
| 88 | S & F in repair Grating doom 125mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 89 | S & F 1000 litres capacity rotational moulded polyethylene water storage tank, double layer construction, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long, 25 mm dia tank nipple ,hoisted and fixed in position complete all as specified and directed. |
| 90 | S & F ball valves 40 mm high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 455 gms ) complete all as specified and directed. |
| 91 | S & F 25 mm bore, gun metal, globe or Gate valves with iron wheel head, Class-I, Pressure Tested of 1.5 Mpa, screwed both ends for iron pipe complete all as specified and directed. |
| 92 | S & F 40mm bore, gun metal, globe or Gate valves with iron wheel head, Class-I, Pressure Tested of 1.5 Mpa, screwed both ends for iron pipe complete all as specified and directed. |
| 93 | S & F 50 mm bore, gun metal, globe or Gate valves with iron wheel head, Class-I, Pressure Tested of 1.5 Mpa, screwed both ends for iron pipe complete all as specified and directed. |
| 94 | Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10 cm girth complete all as specified and directed. |
| 95 | Supply, laying, connection and testing, 25mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed. |
| 96 | Supply, laying, connection and testing, 50mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors/tranches, etc complete all as specified and directed. |
| 97 | M & L for Mild steel framed work such as grills, gratings, gates etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410-0 Gde E-250 complete all as specified and directed. |
| 98 | S & F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed. |
| 99 | M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and directed. |
| 100 | M & L for hardcore of gauge n.exc 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 101 | M & L for moorum/red bajri filling under floors or in foundations laid in layer nexc 15 cm thick ,including spreading, levelling, watering and consolidation complete all as specified and directed. |
| 102 | M&L for 100 mm thick cement concrete 1:2:4 type B- 2 using 40 mm grade aggregate as in base of flooring/hard standing, etc, and finishing the cement concrete surfaces even and smooth without using extra cement complete all as specified and directed. |
| 103 | M&L for providing and fixing stainless steel (Grade 316L) railing,flag mast post,chain,ladder and similar articles made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 104 | M & L for compound girders and stanchions, lattice girders, aerialmasts, staging for water tanks and the like including caps, bases,splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc made of Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed. |
| 105 | Cutting existing CI/DI water mains of dia 80 mm and making branch connection by inserting tee/elbow/reducer etc all as specified and directed by Engr-in-Charge. |
| 106 | M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as inin surface channels and drains complete all as specified and directed. Please Enable Macros to View BoQ information |
| 107 | M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as inin surface channels and drains complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender