Tender For Renovation Of Corridor, Conference Hall And Adjoining Rooms At Qcl South Block First Floor, Midhani Plant Note: Contractor Has To Quote Overall Price Viz Price + Taxes + Gst + Cess. The Accuracy Shall Be Up To Two Decimals
Tender Value
49.79 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
21 days left
EMD
1.24 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Corridor, Conference Hall And Adjoining Rooms At Qcl South Block First Floor, Midhani Plant Note: Contractor Has To Quote Overall Price Viz Price + Taxes + Gst + Cess. The Accuracy Shall Be Up To Two Decimals
BOQ
| Sl. No. | Item Description |
| 1 | Part A- Renovation works for QCL south block first floor Corridor |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm |
| 4 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 5 | Brick work with common burnt clay F.P.S. (modular) bricks of class designation 7.5 in super structure above plinth level upto floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | Providing and laying 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). |
| 7 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel/Brass butt hinges with necessary screwsExtra for providing vision panel not excedding 0.1 sqm (0.75 x 0.45 in m) in all type of flush doors (excluding cost of glass)Rectangular or square |
| 8 | Fixing Float glass panes5 mm thick glass panes (weight not less than 12.50 kg/sqm) |
| 9 | Providing and fixing plywood 6 mm thick, one side decorative veener confirming to IS: 1328 (type-I), for plain lining/cladding with necessary screws, priming coat on unexposed surface with:Decorative veener facings of approved manufacture |
| 10 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 250x10 mm |
| 11 | Providing and fixing Door handle with lock set, necessary screw etc., complete of approaved make (Godrej Mortise lock product code 8220) |
| 12 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete as per instructions of Engineer-In-Charge |
| 13 | Providing and applying white cement based putty of average thickness 1mm, of approaved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 14 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 15 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed(plain / Black glass & one no. wire mesh panels) along with UPVC Grill /Aluminum Grill made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. |
| 16 | Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Make : Armstrong/ Gyprock/ any equivalent brand approved by Engineer-in-charge. |
| 17 | Scrapping with sand paper and preparing the surface smooth for Melamine polishing on wood work (one or more coat) including a coat of wood filler and necessary repairs to scratches etc., complete includes applying of strainer on doors: Two or more coats |
| 18 | Providing and laying in position cement concrete of specified grade, work above plinth level : PCC 1:4:8 (1 cement, 4 coarse Sand(Zone-III) derived from natural sources: 8 graded stone aggregate 40mm nominal size derived from natural sources) |
| 19 | Providing and laying Glazed vitrified floor tiles polished finish of size of Tile 600 x 1200 mm in floor of Make : KAJARIA / AGL / Make approved by EIC (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 20 | Providing and laying flamed finsih Granite stone flooring with 18 mm thick stone (machine cut & mirror polished granite flooring, treads/risers in one piece, square cut nosing slightly softened by rounded/chamfered as required) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete for staircase, landing as specified and as directed by the Engineer-in-Charge. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 21 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc., complete |
| 22 | Providing and fixing of door closer, holds open at 90 degrees with door weight capacity of 60 kg to 80 kg, with silver finish, adjustable latching/ closing speed |
| 23 | Providing & cutting grooves in brick wall of 6\\" width and 2\\" depth for laying IT & Telephone cables and make proper finishing with plastering in CM (1:4) as per direction of Engineer-in-charge |
| 24 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. 35 mm thick WPC Door Shutter |
| 25 | Part B - Renovation of Conference hall QCL south Block |
| 26 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 27 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area above 3 sq. metres |
| 28 | Brick work with common burnt clay F.P.S. (modular) bricks of class designation 7.5 in super structure above plinth level upto floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 29 | Providing and laying 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). |
| 30 | Providing & fixing 12.5 mm thick tapered edge gypsum plain board false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed complete but excluding the cost of painting. (DESIGN based on as per EIC) |
| 31 | Providing and applying white cement based putty of average thickness 1mm, of approaved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 32 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 33 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete as per instructions of Engineer-In-Charge |
| 34 | Providing cement primer having VOC content less than 50 gram/ litre |
| 35 | Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-termite treatment (including the cost of chemical emulsion)Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same |
| 36 | Providing and fixing wall Acoustic soundproof wooden panel by using material of guardian (waterproof plywood) 18mm and 12mm ply wood and 1mm Laminate including all necessary fittings etc., as per instructions of Engineer incharge. |
| 37 | Providing and Fixing of Customized wallpaper Poster (Canvas Type) |
| 38 | Providing and fixing of filing cabinet 1'6'' width with doors and shelves with provision for every 3' height using 18mm thick plywood and 1mm thick approved colour lamiate for all exposed surfaces and 0.8mm thick white colour lamiate for all inner surfaces, with all required hardware, lock, hinges, telescopic drawer channel, 4'' handles, etc. complete job in respect, as per instruction of E.I.C. |
| 39 | Providing & fixing in position Phenol bonded Bamboowood flooring with planks of sizes 14mm thick, minimum 1800mm length and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded polyethylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm, wherever required. The bamboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge |
| 40 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed(plain / Black glass & one no. wire mesh panels) along with UPVC Grill /Aluminum Grill made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. |
| 41 | Providing and fixing of roller blinds (recon make) for windows complete as per direction of Engineer in charge |
| 42 | Providing and fixing of conference table with 19mm water proof ply and 6mm ply and 1mm Laminate edge finishing ( miniumum height of the table is 2 feet 6\\" or 750mm) with wood biding, melemn polish and other necessary hard wares as per instructions of Engineer incharge. |
| 43 | Supply of Dynamic MB Black Chairs (make : Onlx) as per instructions of Engineer incharge. |
| 44 | Supply of Dynamic HB-Black Chairs (make : Onlx) as per instructions of Engineer incharge. |
| 45 | Supply of Pedestal Chairs (make : Onlx) as per instructions of Engineer incharge. |
| 46 | Providing & cutting grooves in brick wall of 6\\" width and 2\\" depth for laying IT & Telephone cables and make proper finishing with plastering in CM (1:4) as per direction of Engineer-in-charge |
| 47 | PART C- Renovation of Rooms (1, 14 & 15) to Cabins |
| 48 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area above 3 sq. metres |
| 49 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm |
| 50 | Providing and laying in position cement concrete of specified grade, work above plinth level : PCC 1:4:8 (1 cement, 4 coarse Sand(Zone-III) derived from natural sources: 8 graded stone aggregate 40mm nominal size derived from natural sources) |
| 51 | Brick work with common burnt clay F.P.S. (modular) bricks of class designation 7.5 in super structure above plinth level upto floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 52 | Providing and laying 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). |
| 53 | Providing & fixing 12.5 mm thick tapered edge gypsum plain board false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed complete but excluding the cost of painting. (DESIGN based on as per EIC) |
| 54 | Providing and applying white cement based putty of average thickness 1mm, of approaved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 55 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 56 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade for New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 57 | Providing & cutting grooves in brick wall of 6\\" width and 2\\" depth for laying IT & Telephone cables and make proper finishing with plastering in CM (1:4) as per direction of Engineer-in-charge |
| 58 | Providing and laying Glazed vitrified floor tiles polished finish of size of Tile 600 x 1200 mm in floor of Make : KAJARIA / AGL / Make approved by EIC (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 59 | Providing and fixing L-Shape Manager Table with drawer and openable unit with filling storage unit using 18mm thick plywood and 1mm thick approved colour lamiate for all exposed surfaces and 0.8mm thick white colour lamiate for all inner surfaces, with all required hardware, lock, hinges, telescopic drawer channel, 4'' handles, etc. complete job in respect, as per instruction of E.I.C. |
| 60 | Providing and fixing low height Wooden partition net thick 50mm using material 25mm thick New wood framework 2x2 grid with 6mm plywood & 1 mm laminate both side, one pinup board with fabric, partition top new wood binding and. Electrical lines partition inside. run necessary hardware edge finished with melamine polish of sizes, complete as per instruction of E.I.C. |
| 61 | Providing and fixing of filing cabinet 1'6'' width with doors and shelves with provision for every 3' height using 18mm thick plywood and 1mm thick approved colour lamiate for all exposed surfaces and 0.8mm thick white colour lamiate for all inner surfaces, with all required hardware, lock, hinges, telescopic drawer channel, 4'' handles, etc. complete job in respect, as per instruction of E.I.C. |
| 62 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed(plain / Black glass & one no. wire mesh panels) along with UPVC Grill /Aluminum Grill made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. |
| 63 | Providing and fixing of roller blinds (recon make) for windows complete as per direction of Engineer in charge |
| 64 | Supply of Dynamic MB Black Chairs (make : Onlx) as per instructions of Engineer incharge. |
| 65 | PART D - Renovation works for adjoining rooms of QCL south block first floor |
| 66 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area above 3 sq. metres |
| 67 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm |
| 68 | Brick work with common burnt clay F.P.S. (modular) bricks of class designation 7.5 in super structure above plinth level upto floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 69 | Providing and laying 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). |
| 70 | Providing & fixing 12.5 mm thick tapered edge gypsum plain board false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed complete but excluding the cost of painting. (DESIGN based on as per EIC) |
| 71 | Providing and applying white cement based putty of average thickness 1mm, of approaved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 72 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 73 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade for New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 74 | Providing & cutting grooves in brick wall of 6\\" width and 2\\" depth for laying IT & Telephone cables and make proper finishing with plastering in CM (1:4) as per direction of Engineer-in-charge |
| 75 | Providing and laying Glazed vitrified floor tiles polished finish of size of Tile 600 x 1200 mm in floor of Make : KAJARIA / AGL / Make approved by EIC (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 76 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed(plain / Black glass & one no. wire mesh panels) along with UPVC Grill /Aluminum Grill made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. |
| 77 | Providing and fixing of roller blinds (recon make) for windows complete as per direction of Engineer in charge |
| 78 | PART E - Electrical & IT Supply and fixtures for QCL south block first floor renovation works Electrical |
| 79 | Supply And Laying of 3 Run X 2.5sq.mm PVC insulated single core multistrand copper flexible Wire (make : Finolex/Havells) |
| 80 | Supply and laying of 1 inch PVC conduit, bends , junction boxes etc.., make : sudhakar |
| 81 | Supply and laying of 2 Run X 1.0 sq.mm PVC Insulated Single Core Multistrand copper flexible wire (Make : Finolex/Havells) |
| 82 | Supply and laying of 3/4 inch PVC Conduit, bends, junction boxes etc.., make : sudhakar |
| 83 | Supply and installation of 20/24W profile LED luminaire with driver, Make : Crompton/Havells |
| 84 | Supply and insallation of Split air conditioner, 5 star , inverter model, with ISEER - 5.6 , Make: Hitachi/Daikin/Carrier |
| 85 | Supply and fixing of 12 way modular boxes, Make : legrand |
| 86 | Supply and fixing of 6 way modular boxes, Make : legrand |
| 87 | Supply and fixing of 3 way modular boxes, Make : legrand |
| 88 | Supply and fixing of 12 way modular plates, Make : legrand-Mylinc |
| 89 | Supply and fixing of 6 way modular plates, Make : legrand-Mylinc |
| 90 | Supply and fixing of 3 way modular Plates, Make : legrand-Mylinc |
| 91 | Supply and fixing of 6A modular switches, Make : legrand-Mylinc |
| 92 | Supply and fixing of 6A modular Sockets, Make : legrand-Mylinc |
| 93 | Supply and fixing of 16A modular switches, Make : Legrand-Mylinc |
| 94 | Supply and fixing of 16A modular Sockets, Make : Legrand-Mylinc |
| 95 | Supply and Installation of High Speed 28-30 W 5 star rated, copper winding, RF remote controller ceiling fan - BLDC type 230V AC, Make: Atomberg/Bajaj/Lukar / Crompton |
| 96 | Supply and Installation of 36W 2 X 2 Indoor slim LED False Ceiling Light, 230V AC , 3600 Lumens output, Make : Crompton/Bajaj/Wipro/Havells |
| 97 | Supply and Installation of 8Way, 3 Phase, Double door MCB Distribution box with MCCB mounting arrangement, Make: Havells |
| 98 | Supply and Installation of 4Way, 3 Phase, Double door MCB Distribution box with MCCB mounting arrangement, Make: Havells |
| 99 | Supply and Installation of 125 A, 50kA, 3P MCCB , Make: Havells |
| 100 | Supply and Installation of 10A SP MCB C Type , Make: Havells |
| 101 | Supply and Installation of 16A SP MCB C Type Make:Havells |
| 102 | Supply and Installation of 20A Industrial Metal clad plug and socket enclosed in Metalic box with 20A SP C MCB, Make: Havells |
| 103 | VIDEO CONFERENCE CAMERA, WITH NECESSARY ACCESSORIES, MAKE AND MODEL : KONFTEL CAM 50 |
| 104 | USB SPEAKER PHONE AND BLUETOOT CONFRENCE PHONE,WITH NECESSARY ACCESSORIES, MAKE AND MODEL : YAMAHA -YVC-1000 |
| 105 | EXTENTION MICROPHONE, WITH NECESSARY ACCESSORIES, MAKE AND MODEL : YAMAHA MIC1000EX |
| 106 | HDMI CABLE 30 MTS |
| 107 | 65'' FULL HD(1080P) LED HIGH END PROFESSIONAL DISPLAY(1920 X 1080), 2 X HDMI,DVI,VGA,RS232,2 X USB,RJ-45,WALL-MOUNT BRACKET.(SAMSUNG/SONY/LG) |
| 108 | WIRELESS KEYBOARD & MOUSE Make: Dell,HP |
| 109 | UTP Cat 6 bundle (305 metes) Make :molex,netfox |
| 110 | Backbox and dual faceplate make - molex |
| 111 | I/O -Make : Molex |
| 112 | Cat 6 patch panel 24 port fully loaded Make: molex |
| 113 | 1inc PVC pipe MAKE:Sudhakar |
| 114 | 1inc c'clamp Make :any |
| 115 | Installation and commission of all the VC setup included in this PO, including all necessary accessories to fulfill the scope of work |
| 116 | UTP cable laying of 2400 meters,termiantion of the UTP in I/O backbox |
| 117 | Chipping of the wall |
| 118 | termination of UTP in I/O box and patch panel end. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender