Tender For Strengthening Of Existing Bituminous Road Of New Kilokari Colony, Dtl And Repair Of Boundary Walls Along With Internal And External Finishing Works At Dtl Rewariline, Najafgarh Colony And Kirti Nagar Office.
Tender Value
96.71 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
16 days left
EMD
1.93 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Strengthening Of Existing Bituminous Road Of New Kilokari Colony, Dtl And Repair Of Boundary Walls Along With Internal And External Finishing Works At Dtl Rewariline, Najafgarh Colony And Kirti Nagar Office.
BOQ
| Sl. No. | Item Description |
| 1 | Sub Head 1:- Item No. 1.1 to 1.10:- Strengthening of existing bituminous road of New Kilokari Colony, DTL. |
| 2 | Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material within all lifts and lead upto 1km (by mechanical means).(DSR16.77) |
| 3 | Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications :On W.B.M. @ 0.75 Kg / sqm.(DSR16.30.1) |
| 4 | Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications :On bituminous surface @ 0.50 Kg / sqm (DSR16.30.2) |
| 5 | Surface dressing on old surface with hot bitumen of grade VG - 10 of approved quality using 1.95 kg of bitumen per sqm with 1.50 cum of stone chippings 11.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity, etc. complete. (DSR16.27) |
| 6 | Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge.50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. (DSR16.54.1) |
| 7 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. (DSR16.62) |
| 8 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.(DSR15.60) |
| 9 | Raising and aligning the level of existing manholes to match the newly constructed road surface. The work includes dismantling and removing the surrounding bituminous material around the existing manhole, increasing the height of the manhole shaft with adequate brickwork or other approved materials, and resetting the frame and cover so that the finished top level is flush with the new road surface, all as directed by the Engineer-in-Charge. The rate shall include all labour, materials, tools, equipment, and incidental works required for proper completion. Measurement shall be taken per number of manholes completed. (NS) |
| 10 | Providing and fixing Speed Bump size 500x350x50mm (LxWxH) of PIONEER / DARK EYE make and should be design dynamically and compact that it can bear maximum load on it. It should be made of PE Plastic material. Two highly reflective reflectors moulded in PMMA material are welded with ABS base plate through ultrasonic welding process and then fixed on to the speed bump so that dust and water can not touch reflector's inside. It is available in Yellow and Black colours. 6 nos. matellic bolts are used per piece for installation on the road. Weight of the bump per piece should not be less then 2200gms per piece and 8800gms per mtr (approx.) 1 mtr constitute of 2 pieces. complete as per direction of Engineer-in-Charge. (NS) |
| 11 | Providing and laying of 110 mm PVC pipe across the roads for drainge of waste water. This item includes supply, transportation, loading /undloading of all the material and labour required to complete the work of cutting of road for laying the PVC pipe of reputed make such as supreme, prakash or equivalent of strength 10kgf/cm2, 110mm nominal dia. and repairing of the same alongwith all T&P complete as per the direction of Engg-in-charge.(NS) |
| 12 | Sub Head 2:- Item No. 2.1 to 2.20:- Repair of boundary walls along with Internal and External Finishing Works At DTL Rewariline, Najafgarh Colony and Kirtinagar office. |
| 13 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.(DSR13.91) |
| 14 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.(DSR15.56) |
| 15 | Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size,dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. Ordinary cement finish using ordinary cement.(DSR13.19.1) |
| 16 | 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand).(DSR13.1.1) |
| 17 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand).(DSR13.2.1) |
| 18 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(DSR13.80) |
| 19 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)(DSR13.46.1) |
| 20 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5sq.meters and under, including cutting the patch in proper shape, rakingout joints and preparing and plastering the surface of the walls complete,including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand).(DSR14.1.1) |
| 21 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre(DSR13.41.1) |
| 22 | Applying priming coats with primer of approved brand and manufacture,having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre.(DSR13.85.3) |
| 23 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC(Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one or more coats).(DSR13.81.1) |
| 24 | Wall painting with acrylic emulsion paint, having VOC (Volatile OrganicCompound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats(DSR13.82.2) |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work(DSR13.99.1) |
| 26 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In Cement mortar(DSR15.7.4) |
| 27 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1cement : 4 coarse sand) (DSR6.4.1) |
| 28 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm(DSR15.23.1) |
| 29 | Grading roof for water proofing treatment with Cement mortar 1:3 (1 cement : 3 coarse sand)(DSR22.14.2) |
| 30 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase(DSR12.21.1) |
| 31 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting,unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.(DSR15.60) |
| 32 | Recovery of FPS bricks class designation 7.5 as per engineer in charge.(NS) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender