Tender For Improvement Of Drink From Tap & 24X7 Water Supply To Lingaraj Vihar, Kargil Basti & Its Adjoining Areas From Munduli Wtp Command, Bbsr
Tender Value
3.35 Crore
Estimated cost
Bid Submission
12 Oct 2026
19 days left
EMD
3.36 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Drink From Tap & 24X7 Water Supply To Lingaraj Vihar, Kargil Basti & Its Adjoining Areas From Munduli Wtp Command, Bbsr
BOQ
| Sl. No. | Item Description |
| 1 | Network Improvement (Installation of Isolation valve, Interconnection work & SV Chamber) |
| 2 | Supplying all labours and T&P for earth work in all kind of soil within 50Mtr inttial lead and 1.5Mtr initial lift including rough dressing and breaking of clods maximum 5cmto 7cm size and laying in layers not exceeding 0.30Mtr in depth as per direction of Engineer -in -charge. |
| 3 | Excavation of foundation in laterite rock or any hard rock (other than granite or disintegrated rock) removed by chiselling including dressing and leveling the bed not exceeding 1.5Mtr depth and depositing the soil within 50Mtr initial lead as per specification approved by the Deptt. |
| 4 | Dismantlaing of Asphalt road by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02/cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 Mtrs, stacking serviceable and unseriviceable materials separetly. |
| 5 | Provide all labour, T&P for laying in trenches, the centrifugally cast ( spun) iron pressure pipes, class LA confirming to IS 8329:2000 and Ductile Iron pipes of the following nominal diameter, as per the specification, all complete as per direction of engineer-in-charge (Excluding Earth work). Including cost D.I pipe 300 mm dia D.I pipe (K-7) |
| 6 | 250 mm dia D.I pipe (K-7) |
| 7 | 100 mm dia D.I pipe (K-7) |
| 8 | Laying in trenches C.I./D.I specials conforming to I.S.-1538 of the following diameter as per P.H. specifications including carriage of materials from store to work site etc complete.(excluding earth work in excavation,jointing but including cost of specials) |
| 9 | supplying all materials ,labour T&P and laying in trenches centrifugally cast (Spun) suctile iron pressure socket & spigot pipe ,class - k7 with out cement mortar laining conforming to I.S 8329 of following nominal diameter as per specification complete for push on rubber gacket jointing including testing etc complete as per direction EIC . a. 300 mm dia Tyton push -on joint |
| 10 | 250 mm dia Tyton push -on joint |
| 11 | 100 mm dia Tyton push -on joint |
| 12 | Supplying all materials ,labour and T&P for providing and laying MS pipe and specials conformng to IS 3589/99 of quality grade Fe 410 of following nominal dia and including transportation of pipes and fitting to site etc all complete as per direction of Engineer- in-charge. a. 250 mm dia MS pipe (6.30 mm thick) |
| 13 | 250 mm dia CI mecanical joint |
| 14 | 250 mm dia MS flange 25mm thick |
| 15 | 250 mm dia MS 90*Bend |
| 16 | 250mm dia x 0.30m M.S Flanged shortpiece |
| 17 | 300 mm dia MS pipe (6.40 mm thick) |
| 18 | 300 mm dia MS flange 12mm thick |
| 19 | 300 mm dia CI mecanical joint |
| 20 | 300 mm dia MS Bend |
| 21 | 300mm dia x 0.30m M.S Flanged shortpiece |
| 22 | 100 mm dia MS pipe (4.50 mm thick) |
| 23 | 100 mm dia CI mecanical joint |
| 24 | 100 mm dia MS flange 10mm thick |
| 25 | 500 mm dia MS pipe (8.00 mm thick) |
| 26 | Supplying all labour and T&P for cutting of C.I /D.I pipe by eletric arc welding at site including cost of materials,labour and T&P etc all complete as per direction of Engineer-in-charge . |
| 27 | Supplying all materials labour and T&P for cutting of following dia MS pipe etc all complete as per the direction of Engineer -in charge. |
| 28 | Supplying all labour and T&P for jointing following dia MS pipe upto 8.0mm thick in trenches by electric arc welding & generator Set of pocket etc all complete (at work site) |
| 29 | Supplying of materials ,labour and T&P for making flanged with necessary rubber insertation & nut bolts of the following diamiter as per P.H specification as per direction of Engineer-in -charge . a. 300 mm dia flange joint |
| 30 | 250 mm dia flange joint |
| 31 | 100mm dia Flange Joint |
| 32 | Supplying all materials ,labour and T&P for filling foundation and plint with sand as per direction of Engineer-in-charge . |
| 33 | Providing cement concrete (1:3:6) with 40mm sizeC.B.H.G chips in floor including supplying all labour, materials, T&P and cost, convence, royalities taxes etc. all complete as per specification and direction of Engineer-in-Charge. |
| 34 | Providing cement concrete (1:2:4) with 12mm size C.B.H.G. chips in floor including supplying all labour, materials, T & P and cost, conveyance, royalties, taxes, etc. all complete as per specification and direction of Engineer-in-charge. |
| 35 | Supplying all materials ,labour and T&P for filling foundation and plint with excavated materials as per direction of Engineer-in-charge .(All kind of soil) |
| 36 | Supplying all materials Labour, T&P for fixing Ductile Iron Resilient seated Sluice Valve/NR Valve with double flanged end for water works purpose confirming to IS specification for the following nominal diameter as per specification complete including cost of Sluice valve. (Make- VAG/Talis/AVK/IVC/Kirloskar/Equivalent make with approval of the authority) with wheel PN 1.6 a. 250mm Sluice Valve PN-1.6 |
| 37 | 300mm Sluice Valve PN-1.6 |
| 38 | Supplying all materials Labour, T&P for fixing of Temper Proof Air Valve for water works purposes confirming IS specification for the following nominal diameter as per specification complete including cost of Air Valve. (Make- VAG/Talis/AVK/IVC/Kirloskar/ Equivalent make with approval of the authority) a. 50mm dia Air Valve with fitting fixing |
| 39 | Supplying all materials, labour and T&P and Construction of brick masonary Sluice Valve chamber of following sizes , earth-work in excavation in all kinds of soil laying of pipe 150mm thick CC (1:4:8) with crusher broken hard granute metal upto 4cm size metal250mm thick brick masonary work with KB brick in C.M (1:3) having crushing strength between 100 Kg/cm sqm 12mm thick cement plastering with CM (1:3) for both inside surface fixing of 2 Each of polypropylene coated foot step at approved intervals including curing, filling of annular spaces after the construction etc all complete as per the approved drawing if any and the direction of Eng-in-charge. a. Construction of Sluice Valve Chamber - As per size - 1.00 x 1.00 x 1.50.( Including Slab) |
| 40 | Supplying all materials,labour and T&P for Construction of . C/V & Flow Meter RCC chamber with R.C.C. top slab & 2 manhole with RCPC cover in (1:1.5:3 ) mix with foundation concrete (1:1.5:3 ) inside plaster 12mm. thick with cement mortar (1:3) finished with neat cement punning, 12mm. thick out side plaster excluding earth work excavation in foundation and refilling the cavity with excavated earth etc all complete as per direction of Engineer in charge. a. Construction of C/V chamber - 6.50 x 2.50 x 1.80 |
| 41 | Supplying all materials, labour, T & P and transporting the excavated surplus materials by mechanical carriage and dumping it at a suitable place within 5 k.m. distance from work site as per direction of Engineer-in-charge. |
| 42 | Repair & replacement of House connection work |
| 43 | Supplying all materials , Labour & T & P for providing New House connections to beneificiares from PHE Deptt./WATCO CI/DI pipe line to the property of beneficiaries/ Repair of House connection with extension of service etc. including earth work excavation ,cutting of concrete / Metal/ BT road, refilling the trenches & making good to the damages road with CC (1:2:4) after completition of the work, lifting of excess excavated materials / debrises from work site & disposed within 5 KM radious by mechanical transport , fixing 1/8\\" dia brass/ GM ferrule with following dia composite Strap Saddle in the CI/DI pipe line , cutting holes in brick/ stone / RCC masonary work , repair the broken holes , cost of uPVC Schedule - 80 pipe (25 mm / 20 mm dia up to 7.0Mtr /10 Mtr respectively ) & fittings , 1 No of PVC Tap of approved make etc. complete as per technical & PH specification and direction of Engineer - in Charge. a. With 100mm dia distribution main |
| 44 | Repair & Replacement of House connection |
| 45 | Supplying all materials Labour & T & P for fitting & fixing of 20mm dia MDPE pipe (PE -80, 10 Kgf/cm2) with compression fittings for connection with ferrule & UPVC service pipe of different diameter to make the connection lea proof including cost of required length of MDPE pipe,both side elbow/Female threaded elbow/Male threaded elbow/Both side adopter/Male threaded adoptor/ Female threaded adoptor etc. complete as per site condition & ditrection of Engineer in charge. |
| 46 | Supply of consumer water meter of size 15mm dia as per ISO 4064 including transportation etc all complete with 5 ( five ) year replacement guarantee from the date of receipt of the materials by the consignee as per direction of Engineer in charge .The water meter shall be inferential type , multijet, magnetically coupled having dry dial, Brass/Bronze body, copper can/stainless steel register with 5mm thick glas dialer class-B confiriming to ISO 4064 standard with ISI & MID certification mark, shall be with protection class of IP-68 complete with connecting pieces and all test certificate , water meter should have certificate for the model, approval as per the Indian Legal Metrology Act 2009 and weights & measure Marking ( i.e W&M marking) and confirming to the technical specification for consumer water |
| 47 | Fixing of Domestic water meter conforming to IS:779-1994 and stop cock in GI Mild Steel pipe/PVC pipe /PE pipe including cost of 15mm UPVC ball valve with solvent welded metal ball, 15mm brass NRV, 25 x 15mm Bush, 15mm FTA, 25mm or 15mm Union, 15mm pipe and any other fittings required all complete as per the direction of Engineer-In-Charge. |
| 48 | Chlorine dosing pump & Analyser |
| 49 | Supply, Installation, Testing and commissioning of Chlorine Dosing machine incluiding laying of pvc pipe interconnection with main waterline, Chemical storage and handling equipment etc. 0-500 Lph ZeroleaKge pneumatic diapharm dosing pump - 2Each, one primary and one standby mode, pressure upto-10bar, 1000 Ltr Chemical tank capacity. Agitator motor - 1Each, strainer, NRV on Pump Outlet, Electrically actute Flow control Valve with PLC compatible VFD Panel for dosing pump and agitator etc. transportation & packaging including cost of materials, all labours, T&P etc. all complete as per the direction of Engineer-in-charge. |
| 50 | Supply & installation of PH analyser with following specification :- measurement -ph/ORP(Platinum), Temperature range-0-600 c(32 to 1400F), maximum pressure-6 Bar(90PSI), (ABB/E&H/Forbes Marshal/Equivalent make with approval of the authority) |
| 51 | Supply,Installation ,testing & commissioning of WATER Quality Moniter for Residual Chlorine in DistributinNetwork, the Input Power Supply should be internal battery (2 of LSH 20 3.6V High Discharge Lithium Battery withCommunication and Data Logging through GPRS Modem, Website, RS232 link to PC,RS232 link to Bluetooth dongle to mobile Device ,Storageof upto 55000 data points in the device and having Electrical Connections 1X 9Way Fischer Socket Yellow (102)Style for RS 232/Bluetooth dongle, 1X 5Way Fischer Socket (103)Style for Chlorine Sensor, 1X 9Way Fischer Socket red (102)Style for External Device, 1X 7Way Fischer Socket Grey (102)Style for External Device having Environmental protection 1P68 to 1m the analyser is designed to fit within Standard Hydrant Chamber with Minimum of 300mm between the Hydrant outlet to the underside of the Chamber lid-150mm(w) x 164mm(h) Weight including laying of connecting uPVC pipe Sch-80 & power supply arrangements etc. complete as per requirement & direction of Engineer in Charge. (ABB/E&H/Forbes Marshall/Equivalent make with approval of the authority)- Chlorine Analyser |
| 52 | Automation & Instrumentation works (SCADA & PLC, Flow meter, Actuator, Pressure transmeter, Level Controller, Soft starter Etc) |
| 53 | Supply of electric powered electromagnetic full bore type IP 68 fully welded Flanged type water flow meter of Pulse DC type of Flow tube SS304, coil housing & electrodes SS316, SS ring type grounding etc with IP 68 signal converter remote mounting,input power supply 24V DC 4 - 20 mA,programable LCD display to show Actual flow rate, totalised flow, flow direction, flow velocity,conductivity with + or - 0.5 % accuracy etc & provision to diagEachtics empty pipe detection, coil temperature, coil resistance etc & compatable to data communication modules with masibus & communication the data to remote SCADA station for live monitoring where ever required including providing data cable & power cable required as per site condition .The standard calibration certificate & guarantee certificate for flow meter & electromagnetic signal converter to be given for minimum one year from the date of installation.The Approved Make : (Make- KROHNE MARSHALL/E&H/ABB/SIEMENS/Equivalent make with approval of authority) including cost of material with all taxes transporataion to Site/Storage with insurance. a. 250mm dia Flow meter |
| 54 | 300mm dia Flow meter |
| 55 | 100mm dia Flow meter |
| 56 | Supply of double chamber DI Control valve (globe type) with solenoid , hydraulic operated with stem amd Positioner for feed back switch, selonoid valve, integral orifice plate assembly, differential control, reverse flow control, restriction orifice Body PN-1.6 can be integrated with PLC pannel for operation with a minimum Pressure in upstream 0.2 Kg/cm2 to a maximum pressure of 8 Kg/cm2 of The Approved Make : VAG/Talis/AVK/IVC/Kirloskar/Equivalent make with approval of the authority) to control water supply including cost of material with all taxes transporataion to Site/Storage with insurance. Flow Control Valve a. 100 mm dia Flow control valve with 2 Each Solenoid |
| 57 | 250 mm dia Flow control valve with 2 Each Solenoid |
| 58 | 300 mm dia Flow control valve with 2 Each Solenoid |
| 59 | Supply of PLC Indoor panel Made out of 2 MM C.R sheet of size (800mm x 800mm x2100mm floor mounted)powdered coated 7 tank process with following component i.e,CPU should have 1 MB program memory with extended memory slut,Redundand-24VDC,SMPS 10Amp along with 24V DC SPD,IO count as DI-16,DO-20,AI-20,AO-08 & MODBUS-10 subsystem shall be same series as CPU,7inch Panel Mounted HMI,Modem should have support MQTT Protocol by default, 24volt DC Industrial switch with minimum 6 eathernate, 4 SFP Port each AI shall be equiped with sutitable signal isolator of 20Each & surge protection device 20Each LIU Isolater, 230Volt AC/230volt AC torroidal transfermer,1KVA 230V AC UPS should have capacity to charge 3 Each 12 VDC 65 AH Battery Bank,DP MCB of Adequate current capacity,Led tube light 10inch 5 watt,door limit switch,Fan 6\\" with louver,4sqmm straight through terminal & fuse terminal 90 Each ,earthing plate.(Make:- Siemens,Schnider,ABB,Mitsubishi/Equivalent make with approval of authority) including cost of material with all taxes transporataion to Site/Storage with insurance. PLC Pannel |
| 60 | Supply,Installation & Commissioning of SCADA software (Make-Schiender/Simens/Rockwell/Equivalent make with approval of authority)with Graphical processor visualisation Advanced alaram management,historical and Real time trending,Built-in-reporting,Stastical process control,Multithreaded citect VBA and Cicode programming language with 500 Tag SCADA Software (Make- Schneider, Siemens),1KVa online Ups with 30Min batery backup- 1Each,CPU Having Preloaded win-10 Proffessional, I3-10gen 2.4 Ghz Prrocessor, DDR4 8gb Ram, 500 gb 7200 Rpm HDD-1 Each ( Make- HP,DELL,LENOVO),USB based keyboard - 1Each,USB based Optical Mouse- 1Each,43'' LED monitor - 1Each,A4 size laserPrinter - 1Each,Wooden Computer table - 1 Each ,Preparation of P&I diagram, Creation of Multi visualization screen for Process control,alarm managenent, Historical and realtime process trend, Daily reporting etc complete as per requirement & direction of Engineer - in - Charge (Including license key) |
| 61 | Pressure Transmitter :Designing, Supplying, Installing, commissioning & testing of pressure transmitter CE markd with following technical parameters at Raw Water Pump House and Interfacing with PLC panel including mounting arrangement along with snubber and needle valve, 1.0 sq.mm 2 core copper braided screen cable Wire, screw, grip & clamp for DI / MS pipe fitting.(Make-E & H/ABB/VEGA/WIKA/Equivalent make with approval of authority)Output 4-20 mA / HARTPower supply - 24V DC ext.Display - 4\\" LEDAccuracy - +/- 0.1 % of full scaleor betterEnclosure- IP 68 |
| 62 | Supply & installation of SS body diaphragm type Pressure gauge of 0-7Kgf/sqcm of 150mm dial with s.s snubber, 15mm 3way s.s gauge cock, ss steel stem etc complete |
| 63 | Supply & installation of industrial Hooter for emergency situation like (over flow of water & contamination of water) and duly programmed with PLC logic etc. |
| 64 | Supply of Level indicator with digital display to be installed at ESR with following specification Range= 0 to 8 Mtr Type =Radar Power Supply=24V DC Out Put=4-20mA (Make-E & H/ABB/VEGA/WIKA/Equivalent make with approval of authority) |
| 65 | Supply, installation of chemical earthing with crystalline conducting material for Back Fill Compound & installation of Maintenance Free Earthing Electrode with ISI mark G.I. Pipe dia 50mm as Secondary electrode with wall thickness of 2.6mm and the primary earthing electrode will be 25mm x 6mm hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the primary earthing & the secondary earthing. A solid G.I. Base plate of 300 x 300 mm seals the unit at the bottom. Ground filling compound will be provided in 25Kg per bag - 2Each. Excavation of earth pit refilling, Precast RCC chamber with lid etc. all complete as per the site requirement. |
| 66 | Supply, Erection, Testing and commissioning of Data communication & networking Instruments incluiding Supply of All materials T&P and Labour Etc. All completed as per electrical specification and as per direction of EIC. |
| 67 | 4U wall-mount Rack/Cabinet shelf or self-standing & is great for organizing your DVR-NVR-Server-Network devices. 4U rack has a key lock feature for keeping your device safe in this cabinet. This rack is made with the highest care while making it. Since making its quality, best, 6-way processed powder coating is done for long-lasting, Corrosion and Rustproof. Top and bottom cable entry provides optimal flexibility for cable management. It also has 4 Power sockets surge protector and 1 AC AXIAL cooling Fan attached in it. Rack size: 45 X 55 X 25.5 CM. Weight: 9.20 Kg. Colour: Gray. Package Contains 1 Rack, Screws, Nylon Sleeves, 2 Keys. |
| 68 | 24 port fiber optic panel or light interface unit to terminate and protect optic cables and fibers in communication networks |
| 69 | Optical fiber 12-port managed L3 gigabit fiber switch and media coverter for non-blocking throughput switching, high performance and low latency, Gigabit Ethernet SFP and RJ45 ports (Make- Digisol- SG-GS4600FSE or equivalent. |
| 70 | Fiber SFP Multi mode transicever 100 base LC type module. |
| 71 | SM(OS2) Duplex Patch cord 3Mtr LC-SC,PC type. |
| 72 | Fiber Pigtail/patchcord 1 Mtr. |
| 73 | Type 2-1 P+N 15KVA Surge protection device |
| 74 | Supply, Installation, Testing & Commissioning of 1KVA Online UPS with external battery type, Having Double conversion IGBT based online UPS system with builtin Isolation Transformer, Input 150-250VAc 1Phase,50Hz, output: 230 VAC,1Phase,50Hz. . All completed as per electrical specification and as per direction of EIC. |
| 75 | Supply, Installation, Testing and commissioning of maintenance free dry type battery 2Volt x 18 Each, 100Ah each. With series connection wire, Lugs, connector etc. Make ( Exide, Amron)All completed as per electrical specification and as per direction of EIC. |
| 76 | Supply & commission of UHD smart commercial TV, with Audio 10w+ 10w, Web OS22.0/23.0, USB, HDMI, WI-FI Built , 43 Inch |
| 77 | Supply, Laying,testing,glanding & termination of Control Cable including Supply of All materials T&P and Labour Etc. All completed as per electrical specification and as per direction of EIC. (Make:-Finolex/Lauritz Knudsen /Anchor/ Havells /V Guard/Equivalent make with approval of the authority) a. Supply of 1.5 sqmm x 3 Core CU.Armourded cable |
| 78 | Supply of 1.5 sqmm x 7 Core CU.Armourded cable |
| 79 | Supply of 1.5 sqmm x 2 Pair CU.Armourded Shielded cable |
| 80 | Supply of 6sqmm cu wire for earthing |
| 81 | 57 mm DC Gland |
| 82 | 22 mm DC Gland |
| 83 | 19 mm DC Gland |
| 84 | 1.5 Copper socket Pin |
| 85 | 35mm single core copper cable |
| 86 | Supply, Erection OF CABLE TRAY & Earthing incluiding Supply of All materials ) T&P and Labour Etc. All completed as per electrical specification and as per direction of EIC. a. Supply & Laying Hotdeep Galvanized 25 x 6 mm G.I. Flat. |
| 87 | Supply & Laying Hotdeep Galvanized300 x 50 x 50 mm1.6 mm thick |
| 88 | Supply, Installation, Testing Wiring & Commissioning of IP 43 rated Lighting DB including Supply of All materials -63A FP MCB-1Each,32A FP MCB-2Each,32A DP MCB-1Each,16A DP MCB-3Each,10A DP MCB-1Each,TPN DB IP-43 METAL DOUBLE DOOR 8WAY-1Each T&P and Labour Etc. All completed as per electrical specification and as per direction of EIC. |
| 89 | Supply, Installation, Testing & Commissioning of 400amps auto transfer system with manual over cun PCC panel including supplying all materials 36KA 400A 4pole mccb with MTX-2.0,spreadere, extended rom, power contactor 2Each, push button, trip switch, auto manual switch.etc. |
| 90 | Power connection deposit to TATA Power |
| 91 | Optical fiber 12-port managed L3 gigabit fiber switch and media coverter for non-blocking throughput switching, high performance and low latency, Gigabit Ethernet SFP and RJ45 ports |
| 92 | Fiber SFP Multi mode transicever 100 base LC type module |
| 93 | CAT-6 Delink cable |
| 94 | Laying of CAT-6 cable either in HDPE duct underground or GI wire support |
| 95 | Internet modem with static IP for data communication |
| 96 | Laying of HDPE pipe by HDD method using HDD machine upto 90mm dia including hire charge of HDD machine, operator, POL, Lubricant etc complete in all respects, including all labour and materials complete as per specification and directions of Site Engineer /Engineer-in-Charge. |
| 97 | HDPE PIPE: Supply and Laying of 40MM dia HDPE pipe (Make: Supreme/equvalent) in cable trench as per specification and directions of Site Engineer / Engineer-in-Charge. |
| 98 | Supply and installation of pre-febricated GRP joint box with lid size 600 x 600 x 600 mm for OFC loop and termination as per telecom specification and direction of site Engineer/ Engineer -in-Charge. |
| 99 | Supply and installation of OFC jointinh kits as per drawing, specification and direction of Engineer-In-Charge/Site Engineer. |
| 100 | Design, engineering, procurement of materials and bought out components, manufacturing, assembly at shop, inspection, testing and painting at manufactures works, packing, supply, unloading/ transportation/ handling/ storage at site, assembly at site, installation including touch-up painting, hook-up, pre-commissioning, commissioning, inspection and testing of the complete of the following capacity (prime power) DG sets along with AMF panels. Acoustic enclosure, supply of all erection & commissioning spares, special tools and tackles (as required), instrumentation, all auxiliaries, Exhaust system & silencer, Fuel tank, Fuel piping etc all complete including RCC foundation,DG set Shed,Chemical earthing 4 nos,Al power cable of required length,trial run with required amount of diesel as per directrion of EIC in complience with CPCB IV norms. all commplete etc. with inspection certificate from electrcal inspector and as per site condition & direction of Engineer in charge.(Make:- Mahindra Power/ Kirloskar/Ashok Leyland/Sterling/Jackson/ Cumin Powers/ Greaves Cotton/ Greaves/TMTL/Captiva/Equivalent make with approval of the authority) 15 KVA |
| 101 | Construction of RCC UGR |
| 102 | Designing, construction, testing and commissioning of 8.00 lakh Ltr capacity RCC UGR including cost of all labour, T&P, Materials with taxes transportation provision with all other accessories line suction pipe, delivery pipe, water lever indicator, lighting arrestor, ladder (inside & outside), M.H. cover, over flow pipe, ventilator etc all complete as per specification and direction of Engineering-in-charge. Capacity of UGR 8Lakh Liter |
| 103 | Construction of PLC Room |
| 104 | Supplying all materials, labour, T&P and design, Construction & Commissioning of PLC room & Chlorine dose room including Toilet with R.C.C Column, R.C.C Beam, Lintel, Chajja, Roof Slab, Fly ash brick work in C.M(1:6), vitrified floor tile Cement plaster & painting works with lead and lift of all materials to site. (The height of roof slab should not be less than 3.00 Mtr from plinth level). PLC room & Chlorine dose room including Toilet 6.50 x 5.50 |
| 105 | Supplying all materials, labour T&P and providing for laying of 100mm dia PVC sewer line connection with all round concrete C.C.(1:2:4) using 12mm size bhgchips including curing with all taxes etc all complete as per direction of E.I.C. A. 110mm dia SWR pipe |
| 106 | Providing and fixing to wall or ceiling and floor UPVC pipes class conforming to UPVC-ASTM Standard (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. a. 25mm dia UPVC Pipe (SCH-80) |
| 107 | 25mm dia UPVC Elbow |
| 108 | 25mm dia UPVC Socket |
| 109 | Supplying fitting fixing of following P.H. fixtures including all cost conveyance labour T&P & taxes etc all complete as per specification and direction of Engineer-in-charge. a. 23\\" I.W.C.(Orissa Pan) |
| 110 | 15mm dia C.P. short body bib cock. (Make:-Jaguar/Plaza/Amber Delux/Equivalent make with approval of the authority) |
| 111 | 15 mm CP Angle cock (Make:-Jaguar/Plaza/Amber Delux/Equivalent make with approval of the authority) |
| 112 | 15mm dia CP pillar cock (Make:-Jaguar/Plaza/Amber Delux/Equivalent make with approval of the authority) |
| 113 | 10 ltr. PVC Low Level Cistern complete (Make:- Parryware/Hindware/Equivalent make with approval of the authority) with PVC make all internal fittings with flush bend. |
| 114 | 32mmx800mm long PVC waste pipe (Make:-Supreme/Finolex/Astral/Equivalent make with approval of the authority) |
| 115 | C.P.revolving shower with arm (overhead) (Make:-Jaguar/Plaza/Amber Delux/Equivalent make with approval of the authority) |
| 116 | C.P.soap holder/disc. (Make:-Jaguar/Plaza/Amber Delux/Equivalent make with approval of the authority) |
| 117 | C.P.grating (Make:-Jaguar/Plaza/Amber Delux/Equivalent make with approval of the authority) |
| 118 | C.P. towel rail.(600x20)mm (Make:-Jaguar/Plaza/Amber Delux/Equivalent make with approval of the authority) |
| 119 | Framed Mirrior |
| 120 | 15mm dia c.p.long body bib cock (Make:-Jaguar/Plaza/Amber Delux/Equivalent make with approval of the authority) |
| 121 | 15mmx450mm PVC connection pipe (Make:-Supreme/Finolex/Astral/Equivalent make with approval of the authority) |
| 122 | 16\\"x 16\\"(400x400) corner W.H.B (Make:- Parryware/Hindware/Equivalent make with approval of the authority) |
| 123 | 25mm Dia UPVC BALL VALVE Sch-80(Plastic Ball) |
| 124 | 25 mm PVC Ball Cock with Rod & Ball |
| 125 | Supply all materials Labour & T&P and fitting & fixing of 1000 ltrs capacity P V C tank including cost of transportation, hoisting, and pipe connection to the tanks and its testing,on the Ground floor with all materials, labours, T&P etc. all complete as per the direction of Engineer-in-charge. (Including cost of 1000 litre capacity PVC Tank (Sintex make ISI - white) with cover as per ISI specification) a. Installation of PVC tank 1000 Lt -Three layer white IS-12701-1996 Over R.C.C Staging |
| 126 | Supplying all materials,labour and T&P for constructing Inspection chamber with R.C.C. top slab in (1:1.5:3 ) mix with inside plaster 12mm. thick with cement mortar (1:3) finished with neat cement punning, 12mm. thick out side plaster (1:3), flyash brick work with flyash bricks with crushing strength not less than 75Kg/sqcm. in cement mortar (1:3) finished smooth complete as per specification. a. Construction of Inspection Chamber.(0.75x0.75x0.75)m |
| 127 | Supplying all materials, labour and T&P for construction of 1.20Mtr.dia.x1.50Mtr. septic tank with R.C.C. well ring 50 mm thick covered by means of R.C.C. slab including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing. a. Septic Tank size (1.20 Mtr Dia x 1.50Mtr.) |
| 128 | Supply all materials, labour and T&P for construction of 1.20 Mtr dia x 1.50 Mtr. Deep Soak-way Pit with R.C.C WELL RING 50mm to 100mm size covered by means of 50 mm thick R.C.C preforated slab including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing. a. Soak way pit (1.20Mtr dia x 1.50 dia) |
| 129 | Recessed / Surface wiring to light point / fan point /Exhaust fan point /call bell point with 1.5 sqmm FR PVC insulated single core multi strand copper conductor of ISI marked with 20 mm dia non-m , MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make:-Finolex/Lauritz Knudsen /Anchor/ Havells /V Guard/Equivalent make with approval of the authority). a. Group - A |
| 130 | Group - B |
| 131 | Supplying all materials labour & T & P for fitting & fixing of following electrical installations including testing & commissioning etc. complete as per direction of Engineer in Charge. a. 15watt LED Bulb. |
| 132 | Electric 200mm Exhaust Fan (Havells/ Bajaj/Usha/ Equivalent make with approval of the authority) |
| 133 | 5 Amp switch |
| 134 | 5 Amp socket |
| 135 | 2.50 Sqmm 3 core copper armoured Cable (Make:-Finolex/Lauritz Knudsen /Anchor/ Havells /V Guard/Equivalent make with approval of the authority) |
| 136 | Supplying with fitting & fixing of 1.5 Ton split A.C (Make Daikin/Hitachi/Carrier) with 3 to 5 star. A.C Installaion |
| 137 | Providing of 4KV Stabilizer (Make-V-guard/Microtek) |
| 138 | Supplying of wall mounted A.C Outdoor iron stand |
| 139 | Supplying of 1.50 ton A.C with copper pipe, drain pipe & 3core A.C Cable |
| 140 | Supplying all material labour T&P and for laying of 2 x 4mm² Copper cable on wall surface as per specification and direction of EIC.(Make:-Finolex/Lauritz Knudsen /Anchor/ Havells /V Guard/Equivalent make with approval of the authority) |
| 141 | Installation Charges of A.C |
| 142 | Providing Supplying, fitting and fixing of 80mm thick interlock concrete colour paver block on compacted river coarse sand free from all organic materials and filling the joints with sand. including cutting corbelling, splays where ever necessary to proper size with cost, conveyance, royalties and taxes of all materials and cost of all labour, etc. complete in all respect as directed by Engineer in charge. Site Devlopement |
| 143 | Weather coat paint two coats over a coat primer wall surface including cost of all materials labour,T&P required for the work etc complete |
| 144 | Finshing metal surface with two coats of enamel paint of approved shade and quality over a coat of primer including cost of all materials, with all taxes, scaffolding, sundries, T&P labour etc complete as per the direction of Engineer in charge. |
| 145 | Supplying all labours and T&P for earth work in all kind of soil within 50Mtr inttial lead and 1.5Mtr initial lift including rough dressing and breaking of clods maximum 5cmto 7cm size and laying in layers not exceeding 0.30Mtr in depth as per direction of Engineer -in -charge. |
| 146 | Supplying all materials labour T & P and fillings sand in foundation & plinth walls well water and rammed including conveyance of all materials to work site , payment of royality , contractor profit &labour cess etc. all complete as per specification and direction of Engineer- in- Charge. |
| 147 | Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete . |
| 148 | R.C.C work in ground floor of in C C (1:1.5:3) with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead, T & P etc all complete as per direction and specification of Engineer-in-charge. |
| 149 | Supplying all materials, labour, T&P and providing rigid and Smooth centering and shuttering for R.C.C. works including False work and dismantling them after casting including Conveyance of all materials to Work site, payment of royalty, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge. |
| 150 | Column 38 x 4 x 0.25 x 2.35 |
| 151 | Supplying of all materials, labour T&P for M.S reinforcement for RCC work including cutting, bending, binding, straightening & tying grills and placing in position including cost of binding wire 18 to 20 gauge, M.S. Rod/Tor steel with all cost, conveyance & taxes etc. all complete as per P.W.D. specification & direction of Engineer-in-charge. |
| 152 | Providing cement concrete (1:2:4) with 12mm size C.B.H.G. chips in floor including supplying all labour, materials, T & P and cost, conveyance, royalties, taxes, etc. all complete as per specification and direction of Engineer-in-charge. |
| 153 | Supplying all materials, labour, T&P and Providing Brick work with Fly Ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm² with dimensional tolerance ± 8 percent in cement mortar(1:6) in S/S including cost of conveyance & royalty, sundries & watering for curing & supervision charges, contractor profit & labour cess etc, all complete as per the direction of Engineer-in-charge. |
| 154 | Supplying all materials, labour, T&P and making 12mm thick cement plaster in cement mortar (1:6) for brick or stone masonry work for brick work including watering, curing, conveyance of all materials to worksite, payment of royalty, contractor profit & labour cess as per the direction of engineer-in-charge. |
| 155 | Supplying all materials, labour, T&P and making 16mm thick cement plaster in cement mortar (1:6) for brick or stone masonry work for brick work including watering, curing, conveyance of all materials to worksite, payment of royalty, contractor profit & labour cess as per the direction of engineer-in-charge. |
| 156 | Supplying all materials ,labour and T&P for filling foundation and plint with excavated materials as per direction of Engineer-in-charge . |
| 157 | Supplying all materials, labour, T&P and providing two coat of Weather Coats over a coat of approved primer with any approved shades including cost of conveyance, brushes, sundries, contractor profit & labour cess etc all complete as per the direction of Engineer-in-charge. |
| 158 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90Mtr. C/C and stainless square pipe bracing of size 32 mm x 32 mm x 2 mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.C/C and stainless square pipe bracing of size case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. Steel Ladder |
| 159 | Supplying all materails labour, T&P for fitting & fixing of Stainless steel gate, ladder made out of a square bar, Round bar etc for approach to sunken floor pump house fixed in propper position & alignment including anchor botting etc. complete as per direction of E.I.C. (50mm Square bar of 3mm thickness.) |
| 160 | Construction of positive suction pump house |
| 161 | Supplying all labours and T&P for earth work in all kind of soil within 50Mtr inttial lead and 1.5Mtr initial lift including rough dressing and breaking of clods maximum 5cmto 7cm size and laying in layers not exceeding 0.30Mtr in depth as per direction of Engineer -in -charge. |
| 162 | Excavation of foundation in laterite rock or any hard rock(other than granite or disintegrated rock)removed by chiselling including dressing and leveling the bed not exceeding 1.5Mtr depth and depositing the soil within 50Mtr initial lead as per specification approved by the Deptt. |
| 163 | Supplying filling in foundation & plinth with sand well watered & rammed including cost, conveyance, royalties, taxes all labour, T & P etc all complete as per specification and direction of Engineer-in-charge. |
| 164 | Providing cement concrete (1:3:6) with 40mm size C.B.H.G. chips in floor including supplying all labour, materials, T & P and cost, conveyance, royalties, taxes, etc. allcomplete as per specification and direction of Engineer-in-charge. |
| 165 | R.C.C work in ground floor of M-25 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete as per direction and specification of Engineer-in-charge. |
| 166 | M.S. Reinforcement for R.C.C. works including cutting, bending, binding and tying grills and placing in position including cost of M.S.Rods, binding wire 18 to 20 gauge. |
| 167 | Supplying all labour, materials, T&P for rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor. A. Base foundation |
| 168 | Coloum upto Plinth |
| 169 | Wall- |
| 170 | Lintel- |
| 171 | Chajja- |
| 172 | Flyash brick work with flyash bricks having crushing strength not less than 75Kg/cm2 in cement mortar(1:6) in super structure including cost of all labour, material T&P with taxes transportation etc all complete. |
| 173 | Providing 12mm thick cement plaster with C.M. (1:6) including cost, conveyance, royalties, taxes all labour, materials T&P etc all complete as per specification and direction of Engineer-in-charge. |
| 174 | Providing 16mm thick cement plaster with C.M. (1:6) including cost, conveyance, royalties, taxes all labour, materials T&P etc all complete as per specification and direction of Engineer-in-charge. |
| 175 | 2.5cm. thick grading concrete (1:2:2) on roof slab with 6mm. Size on new work crusher broken Granite chips in roof work including all cost of labour, T&P materials etc all complete as per direction of Engineer-in-charge. |
| 176 | Providing distemper painting two coats of over a coat of primer approved shade of inside walls including cost conveyance of all materials, etc. all complete as per specification & direction of Engineer-in-charge. |
| 177 | Providing weather coat painting two coats over a coat of primer approved shade of walls including cost conveyance of all materials, etc. all complete as per specification & direction of Engineer-in-charge.(including primer) |
| 178 | Supplying all labour, materials, T&P for providing 2.5cm thick artifical store flooring with C.C. (1:2:4) including punning using 12mm size crusher broken hard granite chips including cost of all labour materials T & P with taxes transporting etc. all complete. |
| 179 | Supplying all labour, T&P , materials for fitting fixing of jointless Industrial floor tile of size 300mm x 300mm of reputed make in floors,treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles all complete (make - Johnson/Venice/Omex/Jayco) . |
| 180 | Supplying all materials, Labours T&P for providing of M.S. Rolling shutter confroming to IS: 6248/79, painted with red oxide primer as per the design approved by the purchaser etc all complete as per direction of E.I.C. |
| 181 | Supplying fitting fixing M.S. Angel, hollow square bar/ M.S door, windows, grills, ladders including cost of labour etc. complete. |
| 182 | Providing Enamel painting two coats over a coat of primer of approved shade of walls including cost conveyance of all materials, etc. all complete as per specification & direction of Engineer-in-charge. including primer |
| 183 | Supplying, fitting and fixing of two track UPVC sliding Window of approved make with 6 mm thick glass of approved quality complete with frame, shutters and all fittings and fixtures. |
| 184 | Supplying all materials, labour, T & P and transporting the excavated surplus materials by mechanical carriage and dumping it at a suitable place within 5 k.m. distance from work site as per direction of Engineer-in-charge. |
| 185 | Supplying all materials labour and T&P for fitting, fixing & Commissioning of 3.0 ton capacity electric aperated hoisting arrangement with 3Mtr lifting system (Inder or speed make) for pump house with addnl 3Mtr extension etc all complete as per the direction of E.I.C. a. 3 tone capacity hoist with 3 Mtr lift chain |
| 186 | Extra 3.00Mtr lift chain |
| 187 | Supplying all materials, labour and T&P for fitting and fixing of ISMB 300mmx 200mm x 6mm thick on two side walls of the pump house so as to accommodate the gantry rail including fitting, fixing , hoisting and placing in position all complete as per the direction of Engineer in charge. |
| 188 | Supplying all materials,labour and T&P for fitting ,fixing & commisioning of chain pully movable trolly all complete as per the direction of Engineer in charge. |
| 189 | Supplying all materials,labour and T&P for fitting and fixing of hanging TVS nutbolts etc all complete as per the direction of Engineer in charge. |
| 190 | Recessed/ Surface wiring to light point/ fan point/ Exhaust fan point/ call bell point with 1.5sqmm FR PVC insulated single core multi strand copper conductor of ISI marked with 20mm dia non-m, MS box with 1.5sqmm FR PVC unsulated single core multistrand copper conductor as earth wire including all accessories and connection (Make:-Finolex/Lauritz Knudsen /Anchor/ Havells /V Guard/Equivalent make with approval of the authority) a. Light Points |
| 191 | Group B |
| 192 | 5A Plug point |
| 193 | Supplying all materials, labour T&P for fittings & fixing of following electricals installations including testing & commissioning etc. complete as per direction of E.I.C. a. Step up modular regulator for fan |
| 194 | 15watt LED bulb inside Positive suction P.H. |
| 195 | 1200mm ceilling Fan (Havells/ Bajaj/Usha/ Equivalent make with approval of the authority) |
| 196 | 32A Double pole MCB |
| 197 | Angle Holder |
| 198 | 1.5 sqmm Copper wire (Phase & Nutral) |
| 199 | Street light (LED) |
| 200 | 1.00 sqmm Copper wire for earthing |
| 201 | 5 Amp modular switch |
| 202 | 15Amp modulatr switch |
| 203 | Pumping Installations & Site Devlopement |
| 204 | Supplying all labour materials and tools and plants for installation testing & commissioning of Horizontal split case centrifugal pumpset No-1 Crompton/KBL/WIPL/ Wilo (M&P)/Grundfos/Equivalent make with approval of the authority with pump rated discharge 90 m3/hr, pump rated head-40 Mtr with Mechanical seal with pump material on Casing-Cast Iron, Impeller-CI, Neck ring-SS-410, Shaft sleeves-SS-410, Stuffing box packing with offered motor CGL 15KW/20HP RPM 1450 motor characteristics 415+-10%, 50 Hz +-5%, S1 duty, TEFC-SCR, IP-55, IE3 efficiency class F/B, Ambient temp 50°C confirming to IS/IEC. |
| 205 | Supply, Installation, Testing & Commissioning PLC Compatible of 15 KW Variable Frequency Drive Panel, made out of 2MM C.R. sheet, duly powder coated, floor mounted, front operated, complete with rated Aluminium Busbar and interconnection with copper wire and lugs. Having 63A MPCB-2 Nos, RYB indicator-2 sets, 3Ph Ammeter-2 Nos, CT 63/5-3 Nos, 6A DP MCB-2 Nos, 20A heavy duty VFD-1 No, Line Reactor-1 No, Auxiliary contactor 2NO+2NC-4 Nos, 2NO+2NC Add-on block-4 Nos, Start/Stop/Reset push button-1 set, ON/OFF/Trip indicator-1 set, Cooling Fan with filter-1 No, 10 mm Power Terminal-4 Nos, 2.5mm Control Terminal-10 Nos. (Make :Make-ABB/Siemens/CG/Schnider/Lauritz Knudsen/Equivalent make with approval of the authority). All complete as per electrical specification and as per direction of EIC. For 2 Nos. of 20HP pump, with one VFD per panel. |
| 206 | Supplying & fitting fixing of 7Mtr long GI octagonal pole having single arm with all arrangement including long and joint with nut, bolt, anchor plate washer and construction of pedeastal for 7Mtr long GI pole with excavation earth work & RCC M20 concrete (2x2x2) with MS bar & finishing the same including removal of excaveted earth etc. including all accessories, labour cost, T&P etc. complete work as per direction of Engineer in charge. |
| 207 | Supplying fitting &fixing of single arm bracket of 1.0 Mtr length suitable for fixing in 70mm top yard lighting octagonal smart pole. |
| 208 | Supplying all materials labour T&P fitting fixing of 90watt endura pearl plus street light commissioning & testing at site.(Havells/ Bajaj/Usha/ Equivalent make with approval of the authority) |
| 209 | Supply & fixing of Dead and clamp including accessories, labour cost, T&P etc. all complete work as per direction of Engineer in charge. |
| 210 | Supplying all materials labour T&P fitting fixing of U-PVC conduits pipes 15x2m for through laying of 2.5mm2 copper wire etc. completed.(Make:-Finolex/Lauritz Knudsen /Anchor/ Havells /V Guard/Equivalent make with approval of the authority) |
| 211 | Supplying all materials labour T&P fitting fixing of U-PVC bend T socket l bend for conduits pipes 15x2m for through laying of 2.5mm2 copper wire etc. completed |
| 212 | Supplying all materials labour T&P fitting fixing of 4mm single core unshield industrial flexible cable annealed copper 50/25 dia mm 24amp laying of neutral from main supply and lighting supply etc. all complete. (Make:-Finolex/Lauritz Knudsen /Anchor/ Havells /V Guard/Equivalent make with approval of the authority) |
| 213 | Supplying all materials labour T&P fitting fixing of 2.5mm single core unshield industrial flexible cable annealed copper 50/25 dia mm 24amp laying of neutral from main supply and lighting supply etc. all complete. (Make:-Finolex/Lauritz Knudsen /Anchor/ Havells /V Guard/Equivalent make with approval of the authority) |
| 214 | Supplying all materials labour T&P fitting fixing of 1mm single core unshield industrial flexible cable annealed copper 1.0sqmm 50/25 dia mm 24amp laying as earthing from main supply and lighting supply etc. all complete. (Make:-Finolex/Lauritz Knudsen /Anchor/ Havells /V Guard/Equivalent make with approval of the authority) |
| 215 | Supplying all materials labour T&P fitting fixing of terminal connector to 16amp. DP MCB CSMBS1C16N onnect main line with pole line etc. all completed. |
| 216 | Supplying, installation, testing & commissioning of A.C 3phase incoming & outgoing electrical operated 440volt to 360volt automatic timmer panel box with supplying of following electrical operated equipments fitting with complete. The panel box is of wall mounted door operations with 2mm thick CR sheet of size 400x600x200mm & the board is made with two coat of approved enameled colour after one coat of primer & the same is made up of dust proof. |
| 217 | Supplying all materials labour T&P for fitting fixing of 63-100amp. 3pole MCCB having breaking capacity of 50KA of reputed make in order to get tripped having phase unbalance of over current or over voltage. |
| 218 | Automatic analog astro time switch |
| 219 | 25amp. 4pole power contactor TC1DX254 |
| 220 | Supplying of phase indicating lamp. |
| 221 | Wall stud. |
| 222 | Supplying, fitting & fixing of 1HP pumpSet for dewatering the excess water from base level positive suction pump house. 1HP Monoblock Pump Set |
| 223 | Design, engineering, procurement of materials and bought out components, manufacturing, assembly at shop, inspection, testing and painting at manufactures works, packing, supply, unloading/ transportation/ handling/ storage at site, assembly at site, installation including touch-up painting, hook-up, pre-commissioning, commissioning, inspection and testing of the complete of the following capacity (prime power) DG sets along with AMF panels. Acoustic enclosure, supply of all erection & commissioning spares, special tools and tackles (as required), instrumentation, all auxiliaries, Exhaust system & silencer, Fuel tank, Fuel piping etc all complete including RCC foundation,sheet Shed with column pipe,Chemical earthing 4 nos,Al power cable of required length,trial run with required amount of diesel as per directrion of EIC in complience with CPCB IV norms.(Make:- Mahindra Power/ Kirloskar/Ashok Leyland/Sterling/Jackson/ Cumin Powers/ Greaves Cotton/ Greaves/TMTL/Captiva/Equivalent make with approval of the authority) 160 KVA Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
TodayOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender