Tender For 8564/E8 Provn Of Rain Water Harvesting System Near Bldg No P-3, P-4 Of 606 Eme Bn And Construction Shed Of Washerman Shop Of 306 Fd Hosp And Constr Of Depot & Kote Perimeter Fencing Under Ge (East) Bareilly
Tender Value
37.35 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
7 days left
EMD
74700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for 8564/E8 Provn Of Rain Water Harvesting System Near Bldg No P-3, P-4 Of 606 Eme Bn And Construction Shed Of Washerman Shop Of 306 Fd Hosp And Constr Of Depot & Kote Perimeter Fencing Under Ge (East) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 mtr depth for foudations etc or for column footings, manholes etc not exceeding 10 Sqm on plan and not exc 1.5 mtr in depth and getting out in hard/dense Soil complete all as specified |
| 2 | Excavation in over area n exc 1.50 mtr depth in hard/dense Soi for foundation etc and getting out complete all as specified and directed. |
| 3 | M&L for use and waste of timbering as planking and strutting for excavations in trenches for shafts, wells, cesspits, manholes and pier holes in soil, including wales, struts, open poling boards, etc. as may be necessary and fixing and removal to support vertical soil complete all as specified. |
| 4 | M&L for cement concrete type D-2 1:4:8 (using 40 mm graded crushed stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed. |
| 5 | M&L for Brickwork with Sub class B, Old size straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 6 | M&L for rendering 15 mm thick in Cement mortar (1:4) on fair faces of stone masonary/concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed |
| 7 | M&L for PCC (1:2:4 )type B-1 using 20mm graded stone agg as in coping including weathering slightly rounded of chamfered angles & throating with and including necessary form work etc complete all as specified & directed. |
| 8 | M&L for Reinforced cement concrete Nominal mix M-25 (using 20 mm graded stone aggregates) in slabs supported on walls, beams & columns complete all as specified and directed. |
| 9 | M&L for mild steel TMT bars 5mm dia and overupto and including 10mm dia in stirrups, spaces and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for colomns hocking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified. |
| 10 | Formwork for Rough finished surfaces of concrete, to soffits and sides of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed |
| 11 | Returning & filling with excavated soil , in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thicks as in soil complete all as specified and directed |
| 12 | Removing excavated material (Hard dense soil) exc. 250 m but not exceeding 500 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 13 | M&L for Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc Fe-410- W(Gde- E-250) quality- B. complete all as specified and directed. |
| 14 | M& L for Reinforced concrete pipes ,class NP-2 laid and jointed complete with collars of bore 200mm complete all as specified and directed. |
| 15 | M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate) concrete bed to drain pipe 200 mm bore including packing under and haunching against the sides of pipes after laid and tested complete all as specified and directed. |
| 16 | M & L PCC type C-2 1:3:6 (using 40mm graded stone aggt) in surface channel and drain complete all as specified and directed. |
| 17 | M&L for Neat cement slurry finish to plastered surfaces all as specified |
| 18 | M&L for Surface dressing nexc 15 cm in soft and loose soil complete. |
| 19 | M&L for 40 mm thick PCC 1:2:4, type B1 (using 20mm graded crushed stone aggregate) as in floors to receive surface of tile complete all as specified and directed. |
| 20 | M&L in repairs for machine pressesd coloured glazed chequered cement concrete 25mm thick Glossy finish with mixture of grey and white cement in equal proportions and no pigment set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar 20 mm thick, in cement mortar 1:6, complete all as specified and directed. |
| 21 | M&L 75 mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base floor / pavings complete all as specified and directed. |
| 22 | M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed. |
| 23 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line,level and curvature ,jointed with cement mortar 1:3 (1 cement:3 coarse sand) ,including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm ) including making drainage opening wherever required complete all as spd and directed . |
| 24 | M & L40 mm thick PCC 1:2:4 type B0, using 12.5mm graded aggregate as in floors to receive surface of tile complete all as specified and directed. |
| 25 | M&L screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed. |
| 26 | M&L Machine cut pre polished kota stone slab flooring 20-25 mm thick and size exc 0.16 sqm jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and treating the surface incl complete complete all as specified and directed |
| 27 | M&L Sand filling under floors or in foundation including watering and consolidation complete all as spd |
| 28 | M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed. |
| 29 | S&F Framed work as in doors, gates and cattle fencing of angle or other section with gusset plates, rails, braces,tubular sec of angular, square or rectangular etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing complete FE 290 Gde E-165 all as specified and directed. |
| 30 | S&F rolled mild steel in roof trusses (framed) , purlins ,crane gantries ,rail and fastenings and heavy bracket framing (beam,tee,angle,channel or flat sections)including distance pieces, cleats etc complete all spd and directed. |
| 31 | S&F Pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified. |
| 32 | S&F Welded steel wire fabric weight n exc 4 kg/sqm supplied and fixed complete to wood or steel members complete all as specified and directed. |
| 33 | M&L for Preparation of new steel surfaces exc 10 cm width or girth and applying two coats of syntetic enamel paint over one coat of red oxide or zinc chrome primer complete all as specified and directed. |
| 34 | Excavation in post holes in soft/ loose soil not exceeding 0.50 Cubic metre each and getting out, returning, filling in and ramming earth or broken rubble moxed with earth around,in layers not exceeding 25cm, watering and removal of surplus spoil to a distance not exceeding 50 metres and making good surface complete all as specified. |
| 35 | S&F for Mild steel work as in angle iron posts or struts for fencing conforming to Fe-290 Gde E-165 as directed, including cutting top to ashape as directed, drilling holes, notching for wire etc including cutting and twisting necessary drilling, bolting and revieting or welding etc and similar works complete all as specified |
| 36 | M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete, complete all as specified. |
| 37 | M&L for PCC 1:2:4 type B-2 (using 20 mm graded stone aggregrate) mass concrete as in embadded 15 cm below, below up to 200 mm from above GL (from work paid seperately) for fixing chain link fencing complete all as specified and directed. |
| 38 | S&F MS round bars 10mm dia & above cut to length bent to shape required including cranking bending spirally for hopping for column hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to IS. |
| 39 | S&F galvanised iron two strand steel barbed wire 2.24mm dia, barbed with 2mm dia barbs @ 75mm c/c spacing and straining and fixing to any type of standard rail, straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, stappies or steel pin, complete all as specified. Note : Each line of wire to be measured. |
| 40 | Supplied only chain link MS galvanised fencing any size or type complete all as specified. |
| 41 | Fixing only chain link fencing including line wire, any mesh, size and type to any type of standards, rails, straining bolts, etc; including provn of binding wire complete all as specified. |
| 42 | MS nuts and bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be provided with one washer and nut. |
| 43 | Dismantling wrought iron or mild steel work of any description and in any position not otherwise specifically provided for (framed/ unframed work) complete all as specified. |
| 44 | Preparing new steel surfaces and treating ends of posts etc., with coal tar black paint area tarred exc .10 Sqm but not exc 0.50 Sqm each complete all as specified. |
| 45 | M&L point wiring complete with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete surfacewiring drawn through & including PVC Conduit of size 20mm dia and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl concealed MS sunken box of suitable size flush with wall surface, suitable for fixing of Modular type switches / sockets etc, complete all as specified and directed for the following :- |
| 46 | All as per serial item No 45 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly complete all as specified and as directed by Engineer-in-Charge. |
| 47 | S&F Modular Switch 1 way 16 Amps, 1 Module size complete all as directed.. |
| 48 | S&F Modular Socket 6A/16 A, 5 Pin ,2 Module size complete all as directed.. |
| 49 | S&F Modular Switch 1 way 6 Amps, 1 Module size complete all as directed.. |
| 50 | Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge. |
| 51 | S&F in replacement of street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with and incl 02 nos MS clamp made of MS flate iron of 50 x 6 mm size with nut, bolts, washer etc with and incl two coats of aluminum paint over a coat of red oxide primer, complete all as directed. |
| 52 | S&F in replacement LED street light luminaire of 35 Watt capacity, made of single piece pressure die-cast aluminium housing with high power LED with lens for proper light distribution luminiaries, IP 66, with toughned glass cover and incl control gear etc, with and incl making all electric connection, complete all as specified and directed by Engineer in charge. |
| 53 | Supply and fixing in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 54 | Supply and fixing in replacement sheet Metal enclosure double shutter type for DB’s 240 Volts Single Pole and Neutral 8 way with 200 Amps rated bus bar complete complete all as specified and as directed by the Engr-in-Charge.. |
| 55 | Supply and fixing in replacement SPN 40 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning. |
| 56 | Supply and fixing in replacement SP 5 to 32 amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning. |
| 57 | Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR 2020 Part-I and connecting to MCBDB’s earth test point all as specified or indicated including testing on completion . |
| 58 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) |
| 59 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminiumconductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 6 sqmm all as specified and directed by Engr-in-Charge. |
| 60 | Supply and fixing galvanised steel tube of size 20 mm medium grade including all accessories all as specified and directed by Engr-in-Charge. |
| 61 | Supply and fixing angle cock of size 20 mm cast stainless steel, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed by Engr-in-Charge. |
| 62 | Material and labour for drilling of vertical bore well by rotary cum through direct hammering(DTH) technique in any type of strata consisting of following different dia drill bits in sequence from ground level as given below as per IS2800 Part-I-1991 |
| 63 | 300 mm dia drill bit from GL upto a maximum depth of 40 M. |
| 64 | supplying, assembling, jointing , lowering and fixing in position in the bore hole liner assembly, MS casing pipe of 5.4 mm thickness of 200 mm outer dia. Class ’B’ conforming to IS - 4270-2001 (male / female) jointed and welded with COupler rings through out the circumference of pipe and externally painted with two coats of anti corrosive paint complete including providing pea gravel of 8 mm to 4.6 mm size for packing around the casing/ slotted pipe in bore well all as specified and directed by GE. Make Jindal/Tata. |
| 65 | Supplying, assembling, jointing , lowering and fixing in position in the bore hole liner assembly, MS casing slotted pipe of 5.4 mm thickness of 200 mm outer dia. Class 'B’ conforming to IS - 4270-2001 (male / female) jointed and welded with coupler rings through out the circumference of pipe and externally painted with, two coats of ąnti corrosive paint complete including providing pea gravel of 8 mm to 4.6 mm size for packing around the casing slotted pipe in bore well all as specified and directed by GE. Make Jindal/Tata |
| 66 | M & L for loose filling with shingle (river bed aggregate) of gauge 80 mm to 150 mm grade in soakage pit, soakage well complete all as specified and directed. |
| 67 | M & L for loose filling with shingle or gravel (river bed aggregate) of gauge 5 mm to 10 mm grade in soakage pit, soakage well complete all as specified and directed. |
| 68 | M & L for loose filling coarse sand 1.5 to 2.0 mm in size under floor etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender