Tender For Construction Of Community Hall At Kandhasamypuram Village Attrankarai Panchayat In Thoothukudi District
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Oct 2026
6 days left
EMD
30000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tuticorin → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Community Hall At Kandhasamypuram Village Attrankarai Panchayat In Thoothukudi District
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Community hall at Kandhasamypuram village Attrankarai Panchayat in Thoothukudi District |
| 2 | Earth work excavation for foundation in all soils and sub soils to full depth etc., ordinary soil complete |
| 3 | Collection and supply of M.Sand and filling into the foundation and basement including cost and conveyance of sand and labour charges etc, complete |
| 4 | Cement Concrete 1:4:8 mix, using 40mm ISS, HBG metal including cost and conveyance of materals and labour charges for laying, compacting, curing etc, complete. |
| 5 | Supplying and erection centering for sides and soffits inculding etc complete., |
| 6 | Below Ground level |
| 7 | Above Ground level |
| 8 | Supply and fabrication of steel including cost and conveyance of steel and labour charges for cutting, bending and placing in position etc, complete |
| 9 | RCC 1:1.5:3 mix, using 20mm ISS, HBG metal including cost and conveyance of material and labour charges for laying, compacting, curing etc, complete. |
| 10 | Brickwork in CM 1:5 mix, using country bricks including cost and conveyance of materials and labour charges etc, complete |
| 11 | Collection and supply of Red gravel and filling into the foundation and basement including cost and conveyance of sand and labour charges etc, complete |
| 12 | Weathering course with best quality broken brick jelly of 20mm size in pure slaked lime over RCC roof slab etc, complete. |
| 13 | Finishing the top of roof with one couse of pressed tiles 23x23x2cm laid in cm 1:3 mix, etc, complete |
| 14 | Paving the floor with Vitrified tiles laid in cm etc, complete |
| 15 | Supply and applying wall putty 3mm thick over the RCC surface |
| 16 | Plastering with cm 1:5 mix, 12mm thiick including cost and conveyance of materials and labour charges etc, complete |
| 17 | Emulsion painting two coats with approved colour and quality over one coat of primer including cost and conveyance of materials and labour charges etc, complete |
| 18 | Provision for Electrical arrangements |
| 19 | Wiringwith2x1.5sq.mm.PVCinsulatedSCunsheathedFRLScopperconductorof1100VgradeinsuitablePVCrigidpipeonwallandceilingwithPVCaccessoriesandwithTWswitchboxand5AFTswitchwithpaintingofsuitablecolourfor open PVC light point / fan point (for electronic regulator) (6 points per coil) -SD-20 |
| 20 | Wiringwith2x1.5sq.mmPVCinsulatedSCunsheathedFRLScopperconductorof1100VgradeinsuitablePVCrigidpipeonwallandceilingwithPVCaccessorieswith150x100x113mmTWswitchboxfor5A3pinnoninterlockingWallsocketwith5Aflushtypeswitchwithpaintingofsuitablecolourwithcontinuousearthwireconnectionof1.5sq.mmcopper wire for open PVC plug point SD 36 |
| 21 | Supplyandrunof2of1.5sq.mm.PVCinsulatedSCunsheathedFRLScopperconductorof1100Vgradeon7/20GIbearer wire for service connection mains SD 64 |
| 22 | Supplyandrunof2x1.5sq.mm.PVCinsulatedSCunsheathedFRLScopperconductorof1100Vgradein25mmdiaGIpipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains SD 69 |
| 23 | Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb SD 83 |
| 24 | SupplyandfixingofTNEBmeterboardsuitablefor32Asinglephaseserviceconnectionwith32Afuseunit(500V)32Aneutrallinkandearthlink(1\\"x1/8\\"copperflat)onTWplankofsize375mmx300mmx19mmwithsupportingTWreepersof1\\"thickaneithersidewithpaintingwithsuitableboltandnutsforfixingtheTWplankonwallwithearthconnectionandinterconnectionwith7/20PVCinsulatedcopperwirefromEBmetertofuseunitwith1No40Amp30MA Double Pole RCD / RCCB (Higher End) with suitable necessary connection SD no 125 |
| 25 | Supplyandfixingof20AFlushtypeWallSocket32ADPMCBcompletesetforACPluginflushwithwallwithearthconnection (For AC Plug) SD144 |
| 26 | Supplyandfixingof1200mm(48\\")ACceilingfancompletewithsteppedelectronic300Wregulatorwith300mmdownrod on the existing clamp SD 110 |
| 27 | DOORS AND WINDOWS |
| 28 | Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un- plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. |
| 29 | Providing, fabricating and fixing M.S. grills Windows, and ventilator,gates, ladders, rail pipes, nosing angles, with M.S.lugs in staircase steps etc., made out of M.S rods, flats, angles, pipes, channels etc. including necessary fixtures complete as per drawings and specifications and as directed by the Engineer. |
| 30 | UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work |
| 31 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender