Tender For Estimate For Laying 315Mm Dia Upvc Up Gradation Pipe Line For Outlet Rd 13350/R Of Shahpurkandi Channel No.3 For Year 2026-27
Tender Value
59.32 Lakhs
Estimated cost
Bid Submission
03 Oct 2026
9 days left
EMD
1.18 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For Laying 315Mm Dia Upvc Up Gradation Pipe Line For Outlet Rd 13350/R Of Shahpurkandi Channel No.3 For Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipelines with straight or open cutting in streets or open area including and dressing sideslevelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation ,including the cost of diversion for traffic, crossing over trenches for access to thehouses, watching, fencing, etc. and removal of surplus soil out side/inside the towninvolving lead upto 15 meter complete in all respect Depth upto 1.5 mtr. |
| 2 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth includingdressing of bottom and sides of trenches, stacking the excavated soil clear from theedge of excavation and subsequent filling around masonry in 15 cm, layers withcompaction including disposal of all surplus soil as directed within lead of 30 metres First class brick masonary mm thick laid in cement sand mortar 1.6 in foundation andplinth including supply recarriage of bricks cement . |
| 3 | 10mm thick cement plaster 1.4 on sides walls |
| 4 | 10mm thick cement plaster 1:4 on bed and top. |
| 5 | Reinforced cement concrete 1:2:4 hand mixed but including steel reinforcement |
| 6 | Cement Conc.1:2:4 including supply, carriage & with stone ballast or shingle |
| 7 | Cement concrete 1:4:8 with brick ballast 40mm gauge |
| 8 | Laying and jointing of UPVC pipe315 mm dia of 2.5 kg/ sq cm pressure ISI MarkedUPVC Pipes as per ISI- 4985 along the Trenches and laying the same in Trenches tocorrect alignment and gradients, cutting, jointingand testing complete as per specifications. |
| 9 | Providing, laying, fixing, testing and commissioningof Class heavy duty MS Pipeconforming to IndianStandard IS:1239/3589 including fittings like tees, bends,sockets, elbows, flanges, tapers, nutsbolts, gasketsetc. fixing the pipe on thewall /ceiling with suitable clamp sandpainting with two or more coats of syntheticepaint of required shade complete in all respects. (d)50mm internal diameter |
| 10 | Wrought Iron and mild steel ladders, framed grills, grating etc. complete fixed in positionin D-tank |
| 11 | Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated asper IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm |
| 12 | Providing and fixing of Alfa Alfa Valve315 mm dia fitted on riser pipe to act as Nakka(D regulators) |
| 13 | Centering and Shuttering for Concrete faces |
| 14 | Providing & Fixing of Steel Shutter Gate Assembly in Main Pipeline complete in allrespect |
| 15 | Providing UPVC Pipes 315mm Dia Including 18% GST |
| 16 | Providing and fixing 315 mm Elbow/bends of 90 degree 6kg/cm2 pressure as per IS4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge |
| 17 | Providing and fixing 315 mm equal Tee of 6kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge |
| 18 | Providing and fixing MS service saddle 315 x 50mm as per IS 4985 i/c testingcommisioning and complete in all respect to the specification of engineer in charge |
| 19 | Providing and fixing Tail end piece 315 mm of 6 kg/cm2 pressure as per IS 4985 i/ctesting commisioning complete in all respect to the satisfaction of engineer incharge |
| 20 | Providing & fixing C.I/D.I Flanged end, stem of SS (AIS1410) and Bronze(gunmetal)working parts Sluice Valves (315mm) ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineerin-charge). B) Class PN-1.6 as per ISI |
| 21 | Providing & fixing Single air valve ISI Marked as per IS-14845 including jointingall carriages complete .C.I Single air valve (Size 50mm) |
| 22 | Providing and fixing 315mm dia socket (6Kg/cm2 Pressure) Conforming to IS Codes with latest ammendments if any at site work including loading unloading and rehandling ifany in complete respect as per design and pwd specifications and instructinsof engineer-in-charge |
| 23 | (Loading& Unloading) pvc pipes |
| 24 | ( Carriage ) PVC/HDPEpipes all sizes( Truck load 2.20 tonnes) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender