Tender For Repair Of Sill Beam, Side Plates, Gate Roller And Cl Plates Of Under-Sluice Gates Of Dam Cps-1.
Tender Value
1.83 Crore
Estimated cost
Bid Submission
14 Oct 2026
19 days left
EMD
3.68 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chamba → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Sill Beam, Side Plates, Gate Roller And Cl Plates Of Under-Sluice Gates Of Dam Cps-1.
BOQ
| Sl. No. | Item Description |
| 1 | Supply of 25x150x5550mm SS plate grade A 276 Type 304L and Machining it to make 20x150x5550mm as per drawing number 107-22-1A. |
| 2 | Fixing of above item no. 1 at sill beam location including alignment, welding, stiffening, grinding complete in all respect and testing as per instructions of Engineer In charge. The above also includes removal of existing damaged sill beam plate and its stacking at Dam top as per instructions. |
| 3 | Supply of 18x100x5600mm SS plate grade A 276 Type 304L and Machining it to make it 12x100x5600mm as per drawing number 107-22-2A&B. |
| 4 | Fixing of above item no. 3 at left and right side lateral guide location including alingment, welding, stiffening, grinding complete in all respect and testing as per instructions of Engineer In charge. The above also includes removal of existing damaged lateral guide plates and its stacking at Dam top as per instructions. |
| 5 | Supply of Steel Liner Plate (MS) of size 18mm x 700mm x 2800mm |
| 6 | Fixing of above item no. 5 including alignment, welding, grinding complete in all respect as per instructions of Engineer In charge. |
| 7 | Removing of shaft pin after dismantling of the gate roller assembly and repairing it with Weld worn-out areas of the shaft pin accurately in its housing and perform fusion welding using E309L stainless steel electrodes, then machining (i.e., Turning in a lathe machine to its original dimensions) as per the drawing. |
| 8 | Supply of taper roller bearings 32044X bearings of approved make (FAG) as per the Technical specification of taper roller bearing.Specifications:-Taper Roller Bearing Single row no- 32044X, Inside Dia 220 MM, Outside Dia 340 MM & Width Dia 76 MM as per Drawing of FAG make having follwing properties Dynamic load rating: 1060 KN and above Static Load rating: 1640 KN and above Fatigue Load rating: 204KN and above Cage: Steel Cage |
| 9 | Supply of Water-tightening seals of make: KLOZURE GARLOCK, Model no. 53X4012.Specifications:-KLOZURE GARLOCK OIL SEAL NO 53X4012 (Water tightness seal) Inside Dia 10.5'' (266.70MM) Outside Dia 12'' (304.8MM) Width Dia 0.75'' (19.05MM) Case Material: Cold Rolled Steel (CRS) Spring Material: 302SS |
| 10 | Supply of spacers & side plates.Each set comprises the following:1 No. Inner Bush Spacer (SS), (SS 304)1 No. Outer Side Spacer (SS), (SS 304)1 No. Inner Side Spacer (SS), (SS 304)1 No. Pin Spacer (SS), (SS 304)2 No. Roller Side Plate (Keeper Plate-MS), A36 MIN |
| 11 | Installing and functional testing of item nos. 8,9 & 10 (i.e. alignment, smooth operation and absence of abnormal noise or resistance check). Greasing all the components as per the direction of Engineer-in-charge. |
| 12 | Supply of Clamp plates as per the Annexure-B (fabricated from IS 2062 Grade A36 MIN or equivalent structural asteel) with nuts-bolts. |
| 13 | Executing the job of fixing of above item no. 12 by tapping of the clamp plates to the required shape using properly calibrated machines so as to match the thread dimensions of the bolt's specifications (Ensuring threads conform to ISO metric thread standards ISO 261/965 and Thread depth & pitch match with the bolt specifications to ensureproper engagement with SS-304 (ISO 4017) grade bolt including SS-304 grade hex socket countersunk head cap screws for clamp plate including wielding with approved WPS and conforming to AWS D1.1 standards in the clamp plate/base plate wherever, required as per the direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender